ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('11066_MATICA_UTORNA_M8_U10','2011-03-10T',('Dino-2'),
('LIPRO d.o.o.'),'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009380',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009380','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#3=DIRECTION('',(0.E0,0.E0,-1.E0));
#4=DIRECTION('',(1.E0,0.E0,0.E0));
#5=AXIS2_PLACEMENT_3D('',#2,#3,#4);
#7=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#8=DIRECTION('',(0.E0,0.E0,-1.E0));
#9=DIRECTION('',(-1.E0,0.E0,0.E0));
#10=AXIS2_PLACEMENT_3D('',#7,#8,#9);
#12=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#13=DIRECTION('',(0.E0,1.E0,0.E0));
#14=DIRECTION('',(5.E-1,0.E0,8.660254037844E-1));
#15=AXIS2_PLACEMENT_3D('',#12,#13,#14);
#17=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#18=DIRECTION('',(0.E0,-1.E0,0.E0));
#19=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#20=AXIS2_PLACEMENT_3D('',#17,#18,#19);
#22=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#23=DIRECTION('',(0.E0,0.E0,-1.E0));
#24=DIRECTION('',(1.E0,0.E0,0.E0));
#25=AXIS2_PLACEMENT_3D('',#22,#23,#24);
#27=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#28=DIRECTION('',(0.E0,0.E0,1.E0));
#29=DIRECTION('',(1.E0,0.E0,0.E0));
#30=AXIS2_PLACEMENT_3D('',#27,#28,#29);
#32=CARTESIAN_POINT('',(0.E0,0.E0,3.451943185593E0));
#33=DIRECTION('',(0.E0,0.E0,1.E0));
#34=DIRECTION('',(1.E0,0.E0,0.E0));
#35=AXIS2_PLACEMENT_3D('',#32,#33,#34);
#37=CARTESIAN_POINT('',(1.E1,0.E0,2.974759088699E0));
#38=CARTESIAN_POINT('',(1.E1,4.542535904050E-1,2.974759088699E0));
#39=CARTESIAN_POINT('',(1.E1,1.359614648178E0,2.954564940899E0));
#40=CARTESIAN_POINT('',(1.E1,2.708662589385E0,2.866467907947E0));
#41=CARTESIAN_POINT('',(1.E1,4.047388923164E0,2.726485546828E0));
#42=CARTESIAN_POINT('',(1.E1,5.397987390494E0,2.538439252025E0));
#43=CARTESIAN_POINT('',(1.E1,6.788078332201E0,2.303262132040E0));
#44=CARTESIAN_POINT('',(1.E1,7.790550898872E0,2.107144119330E0));
#45=CARTESIAN_POINT('',(1.E1,8.306623862918E0,2.E0));
#47=DIRECTION('',(0.E0,0.E0,1.E0));
#48=VECTOR('',#47,2.E0);
#49=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#50=LINE('',#49,#48);
#51=DIRECTION('',(0.E0,0.E0,1.E0));
#52=VECTOR('',#51,2.E0);
#53=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,0.E0));
#54=LINE('',#53,#52);
#55=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,2.E0));
#56=CARTESIAN_POINT('',(1.E1,-7.790149188010E0,2.107227520243E0));
#57=CARTESIAN_POINT('',(1.E1,-6.787006093487E0,2.303466638891E0));
#58=CARTESIAN_POINT('',(1.E1,-5.396212614933E0,2.538719126597E0));
#59=CARTESIAN_POINT('',(1.E1,-4.045515885690E0,2.726713075123E0));
#60=CARTESIAN_POINT('',(1.E1,-2.707214063378E0,2.866584451521E0));
#61=CARTESIAN_POINT('',(1.E1,-1.358811004628E0,2.954590219589E0));
#62=CARTESIAN_POINT('',(1.E1,-4.539677766517E-1,2.974759088699E0));
#63=CARTESIAN_POINT('',(1.E1,0.E0,2.974759088699E0));
#65=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#66=DIRECTION('',(0.E0,0.E0,1.E0));
#67=DIRECTION('',(7.692307692308E-1,6.389710663783E-1,0.E0));
#68=AXIS2_PLACEMENT_3D('',#65,#66,#67);
#70=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#71=DIRECTION('',(0.E0,0.E0,1.E0));
#72=DIRECTION('',(-6.389710663783E-1,7.692307692308E-1,0.E0));
#73=AXIS2_PLACEMENT_3D('',#70,#71,#72);
#75=CARTESIAN_POINT('',(8.306623862918E0,1.E1,2.E0));
#76=CARTESIAN_POINT('',(7.773865882301E0,1.E1,2.110608167112E0));
#77=CARTESIAN_POINT('',(6.744927172706E0,1.E1,2.311399769426E0));
#78=CARTESIAN_POINT('',(5.339823586489E0,1.E1,2.547500933853E0));
#79=CARTESIAN_POINT('',(3.988076786808E0,1.E1,2.733664898520E0));
#80=CARTESIAN_POINT('',(2.660558679500E0,1.E1,2.870326636435E0));
#81=CARTESIAN_POINT('',(1.332749358224E0,1.E1,2.955413554602E0));
#82=CARTESIAN_POINT('',(-1.069591900137E-3,1.E1,2.984454876633E0));
#83=CARTESIAN_POINT('',(-1.334885123849E0,1.E1,2.955321359664E0));
#84=CARTESIAN_POINT('',(-2.662612345594E0,1.E1,2.870148714341E0));
#85=CARTESIAN_POINT('',(-3.989486199122E0,1.E1,2.733486036353E0));
#86=CARTESIAN_POINT('',(-5.340600191625E0,1.E1,2.547374044157E0));
#87=CARTESIAN_POINT('',(-6.744968421971E0,1.E1,2.311387795329E0));
#88=CARTESIAN_POINT('',(-7.773837824384E0,1.E1,2.110613992336E0));
#89=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,2.E0));
#91=DIRECTION('',(0.E0,0.E0,1.E0));
#92=VECTOR('',#91,2.E0);
#93=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#94=LINE('',#93,#92);
#95=DIRECTION('',(0.E0,0.E0,1.E0));
#96=VECTOR('',#95,2.E0);
#97=CARTESIAN_POINT('',(8.306623862918E0,1.E1,0.E0));
#98=LINE('',#97,#96);
#99=DIRECTION('',(0.E0,-1.E0,0.E0));
#100=VECTOR('',#99,1.661324772584E1);
#101=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#102=LINE('',#101,#100);
#103=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#104=DIRECTION('',(0.E0,0.E0,1.E0));
#105=DIRECTION('',(7.692307692308E-1,6.389710663783E-1,0.E0));
#106=AXIS2_PLACEMENT_3D('',#103,#104,#105);
#108=DIRECTION('',(1.E0,0.E0,0.E0));
#109=VECTOR('',#108,1.661324772584E1);
#110=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#111=LINE('',#110,#109);
#112=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#113=DIRECTION('',(0.E0,0.E0,1.E0));
#114=DIRECTION('',(-6.389710663783E-1,7.692307692308E-1,0.E0));
#115=AXIS2_PLACEMENT_3D('',#112,#113,#114);
#117=DIRECTION('',(0.E0,1.E0,0.E0));
#118=VECTOR('',#117,1.661324772584E1);
#119=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#120=LINE('',#119,#118);
#121=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#122=DIRECTION('',(0.E0,0.E0,-1.E0));
#123=DIRECTION('',(-6.389710663783E-1,-7.692307692308E-1,0.E0));
#124=AXIS2_PLACEMENT_3D('',#121,#122,#123);
#126=DIRECTION('',(-1.E0,0.E0,0.E0));
#127=VECTOR('',#126,1.661324772584E1);
#128=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#129=LINE('',#128,#127);
#130=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#131=DIRECTION('',(0.E0,0.E0,-1.E0));
#132=DIRECTION('',(7.692307692308E-1,-6.389710663783E-1,0.E0));
#133=AXIS2_PLACEMENT_3D('',#130,#131,#132);
#135=DIRECTION('',(0.E0,0.E0,-1.E0));
#136=VECTOR('',#135,3.5E0);
#137=CARTESIAN_POINT('',(5.E0,0.E0,0.E0));
#138=LINE('',#137,#136);
#139=DIRECTION('',(0.E0,0.E0,-1.E0));
#140=VECTOR('',#139,3.5E0);
#141=CARTESIAN_POINT('',(-5.E0,0.E0,0.E0));
#142=LINE('',#141,#140);
#143=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#144=DIRECTION('',(0.E0,0.E0,-1.E0));
#145=DIRECTION('',(1.E0,0.E0,0.E0));
#146=AXIS2_PLACEMENT_3D('',#143,#144,#145);
#148=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#149=DIRECTION('',(0.E0,0.E0,1.E0));
#150=DIRECTION('',(1.E0,0.E0,0.E0));
#151=AXIS2_PLACEMENT_3D('',#148,#149,#150);
#153=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#154=DIRECTION('',(0.E0,0.E0,-1.E0));
#155=DIRECTION('',(1.E0,0.E0,0.E0));
#156=AXIS2_PLACEMENT_3D('',#153,#154,#155);
#158=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#159=DIRECTION('',(0.E0,0.E0,1.E0));
#160=DIRECTION('',(1.E0,0.E0,0.E0));
#161=AXIS2_PLACEMENT_3D('',#158,#159,#160);
#163=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#164=DIRECTION('',(0.E0,0.E0,1.E0));
#165=DIRECTION('',(-1.E0,0.E0,0.E0));
#166=AXIS2_PLACEMENT_3D('',#163,#164,#165);
#168=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#169=DIRECTION('',(0.E0,0.E0,1.E0));
#170=DIRECTION('',(1.E0,0.E0,0.E0));
#171=AXIS2_PLACEMENT_3D('',#168,#169,#170);
#173=DIRECTION('',(7.071067811865E-1,-3.078733557766E-10,7.071067811865E-1));
#174=VECTOR('',#173,1.414213561822E0);
#175=CARTESIAN_POINT('',(-4.499999999065E0,1.044956305799E-9,
-3.499999999065E0));
#176=LINE('',#175,#174);
#177=DIRECTION('',(-7.071067811865E-1,3.078727662812E-10,7.071067811865E-1));
#178=VECTOR('',#177,1.414213561822E0);
#179=CARTESIAN_POINT('',(4.499999999065E0,-1.044955076513E-9,
-3.499999999065E0));
#180=LINE('',#179,#178);
#181=CARTESIAN_POINT('',(0.E0,0.E0,-2.5E0));
#182=DIRECTION('',(0.E0,0.E0,1.E0));
#183=DIRECTION('',(1.E0,0.E0,0.E0));
#184=AXIS2_PLACEMENT_3D('',#181,#182,#183);
#186=DIRECTION('',(5.456879393093E-11,6.095576307697E-11,-1.E0));
#187=VECTOR('',#186,9.999999999454E0);
#188=CARTESIAN_POINT('',(-3.5E0,0.E0,7.5E0));
#189=LINE('',#188,#187);
#190=DIRECTION('',(-5.456888274878E-11,-6.095572351558E-11,-1.E0));
#191=VECTOR('',#190,9.999999999454E0);
#192=CARTESIAN_POINT('',(3.5E0,0.E0,7.5E0));
#193=LINE('',#192,#191);
#194=CARTESIAN_POINT('',(0.E0,0.E0,-2.5E0));
#195=DIRECTION('',(0.E0,0.E0,1.E0));
#196=DIRECTION('',(-1.E0,0.E0,0.E0));
#197=AXIS2_PLACEMENT_3D('',#194,#195,#196);
#199=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,2.E0));
#200=CARTESIAN_POINT('',(-1.E1,7.790149188010E0,2.107227520243E0));
#201=CARTESIAN_POINT('',(-1.E1,6.787006093487E0,2.303466638891E0));
#202=CARTESIAN_POINT('',(-1.E1,5.396212614933E0,2.538719126597E0));
#203=CARTESIAN_POINT('',(-1.E1,4.045515885690E0,2.726713075123E0));
#204=CARTESIAN_POINT('',(-1.E1,2.707214063378E0,2.866584451521E0));
#205=CARTESIAN_POINT('',(-1.E1,1.358811004628E0,2.954590219589E0));
#206=CARTESIAN_POINT('',(-1.E1,4.539677766517E-1,2.974759088699E0));
#207=CARTESIAN_POINT('',(-1.E1,0.E0,2.974759088699E0));
#209=CARTESIAN_POINT('',(-1.E1,0.E0,2.974759088699E0));
#210=CARTESIAN_POINT('',(-1.E1,-4.542535904050E-1,2.974759088699E0));
#211=CARTESIAN_POINT('',(-1.E1,-1.359614648178E0,2.954564940899E0));
#212=CARTESIAN_POINT('',(-1.E1,-2.708662589385E0,2.866467907947E0));
#213=CARTESIAN_POINT('',(-1.E1,-4.047388923164E0,2.726485546828E0));
#214=CARTESIAN_POINT('',(-1.E1,-5.397987390494E0,2.538439252025E0));
#215=CARTESIAN_POINT('',(-1.E1,-6.788078332201E0,2.303262132040E0));
#216=CARTESIAN_POINT('',(-1.E1,-7.790550898872E0,2.107144119330E0));
#217=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,2.E0));
#219=DIRECTION('',(0.E0,0.E0,1.E0));
#220=VECTOR('',#219,2.E0);
#221=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#222=LINE('',#221,#220);
#223=DIRECTION('',(0.E0,0.E0,1.E0));
#224=VECTOR('',#223,2.E0);
#225=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,0.E0));
#226=LINE('',#225,#224);
#227=DIRECTION('',(-9.510565162952E-1,0.E0,-3.090169943749E-1));
#228=VECTOR('',#227,1.544200175333E0);
#229=CARTESIAN_POINT('',(-8.531378360785E0,0.E0,3.451943185593E0));
#230=LINE('',#229,#228);
#231=CARTESIAN_POINT('',(0.E0,0.E0,3.451943185593E0));
#232=DIRECTION('',(0.E0,0.E0,-1.E0));
#233=DIRECTION('',(1.E0,0.E0,0.E0));
#234=AXIS2_PLACEMENT_3D('',#231,#232,#233);
#236=DIRECTION('',(9.510565162952E-1,0.E0,-3.090169943749E-1));
#237=VECTOR('',#236,1.544200175333E0);
#238=CARTESIAN_POINT('',(8.531378360785E0,0.E0,3.451943185593E0));
#239=LINE('',#238,#237);
#240=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#241=DIRECTION('',(0.E0,0.E0,-1.E0));
#242=DIRECTION('',(7.692307692308E-1,-6.389710663783E-1,0.E0));
#243=AXIS2_PLACEMENT_3D('',#240,#241,#242);
#245=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#246=DIRECTION('',(0.E0,0.E0,-1.E0));
#247=DIRECTION('',(-6.389710663783E-1,-7.692307692308E-1,0.E0));
#248=AXIS2_PLACEMENT_3D('',#245,#246,#247);
#250=DIRECTION('',(0.E0,0.E0,1.E0));
#251=VECTOR('',#250,2.E0);
#252=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,0.E0));
#253=LINE('',#252,#251);
#254=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,2.E0));
#255=CARTESIAN_POINT('',(-7.773865882301E0,-1.E1,2.110608167112E0));
#256=CARTESIAN_POINT('',(-6.744927172706E0,-1.E1,2.311399769426E0));
#257=CARTESIAN_POINT('',(-5.339823586489E0,-1.E1,2.547500933853E0));
#258=CARTESIAN_POINT('',(-3.988076786808E0,-1.E1,2.733664898520E0));
#259=CARTESIAN_POINT('',(-2.660558679500E0,-1.E1,2.870326636435E0));
#260=CARTESIAN_POINT('',(-1.332749358224E0,-1.E1,2.955413554602E0));
#261=CARTESIAN_POINT('',(1.069591900131E-3,-1.E1,2.984454876633E0));
#262=CARTESIAN_POINT('',(1.334885123849E0,-1.E1,2.955321359664E0));
#263=CARTESIAN_POINT('',(2.662612345594E0,-1.E1,2.870148714341E0));
#264=CARTESIAN_POINT('',(3.989486199122E0,-1.E1,2.733486036353E0));
#265=CARTESIAN_POINT('',(5.340600191625E0,-1.E1,2.547374044157E0));
#266=CARTESIAN_POINT('',(6.744968421971E0,-1.E1,2.311387795329E0));
#267=CARTESIAN_POINT('',(7.773837824384E0,-1.E1,2.110613992336E0));
#268=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,2.E0));
#270=DIRECTION('',(0.E0,0.E0,1.E0));
#271=VECTOR('',#270,2.E0);
#272=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#273=LINE('',#272,#271);
#274=CARTESIAN_POINT('',(5.E0,0.E0,0.E0));
#275=CARTESIAN_POINT('',(5.E0,0.E0,-3.5E0));
#276=VERTEX_POINT('',#274);
#277=VERTEX_POINT('',#275);
#278=CARTESIAN_POINT('',(-5.E0,0.E0,0.E0));
#279=CARTESIAN_POINT('',(-5.E0,0.E0,-3.5E0));
#280=VERTEX_POINT('',#278);
#281=VERTEX_POINT('',#279);
#282=VERTEX_POINT('',#37);
#283=VERTEX_POINT('',#45);
#284=VERTEX_POINT('',#199);
#285=VERTEX_POINT('',#207);
#286=VERTEX_POINT('',#75);
#287=VERTEX_POINT('',#89);
#288=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#289=VERTEX_POINT('',#288);
#290=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,0.E0));
#291=VERTEX_POINT('',#290);
#292=CARTESIAN_POINT('',(8.306623862918E0,1.E1,0.E0));
#293=VERTEX_POINT('',#292);
#294=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#295=VERTEX_POINT('',#294);
#296=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,0.E0));
#297=VERTEX_POINT('',#296);
#298=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#299=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,0.E0));
#300=VERTEX_POINT('',#298);
#301=VERTEX_POINT('',#299);
#302=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#303=VERTEX_POINT('',#302);
#304=VERTEX_POINT('',#55);
#305=VERTEX_POINT('',#254);
#306=VERTEX_POINT('',#268);
#307=VERTEX_POINT('',#217);
#308=CARTESIAN_POINT('',(8.531378360785E0,0.E0,3.451943185593E0));
#309=VERTEX_POINT('',#308);
#310=CARTESIAN_POINT('',(-8.531378360785E0,0.E0,3.451943185593E0));
#311=VERTEX_POINT('',#310);
#312=CARTESIAN_POINT('',(4.75E0,0.E0,7.5E0));
#313=VERTEX_POINT('',#312);
#314=CARTESIAN_POINT('',(-4.75E0,0.E0,7.5E0));
#315=VERTEX_POINT('',#314);
#316=CARTESIAN_POINT('',(3.5E0,0.E0,7.5E0));
#317=CARTESIAN_POINT('',(-3.5E0,0.E0,7.5E0));
#318=VERTEX_POINT('',#316);
#319=VERTEX_POINT('',#317);
#320=CARTESIAN_POINT('',(-4.5E0,0.E0,-3.5E0));
#321=CARTESIAN_POINT('',(4.5E0,0.E0,-3.5E0));
#322=VERTEX_POINT('',#320);
#323=VERTEX_POINT('',#321);
#324=CARTESIAN_POINT('',(-3.5E0,0.E0,-2.5E0));
#325=CARTESIAN_POINT('',(3.5E0,0.E0,-2.5E0));
#326=VERTEX_POINT('',#324);
#327=VERTEX_POINT('',#325);
#328=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#329=DIRECTION('',(0.E0,0.E0,1.E0));
#330=DIRECTION('',(-1.E0,0.E0,0.E0));
#331=AXIS2_PLACEMENT_3D('',#328,#329,#330);
#332=PLANE('',#331);
#334=ORIENTED_EDGE('',*,*,#333,.T.);
#336=ORIENTED_EDGE('',*,*,#335,.F.);
#337=EDGE_LOOP('',(#334,#336));
#338=FACE_OUTER_BOUND('',#337,.F.);
#340=ORIENTED_EDGE('',*,*,#339,.F.);
#342=ORIENTED_EDGE('',*,*,#341,.F.);
#343=EDGE_LOOP('',(#340,#342));
#344=FACE_BOUND('',#343,.F.);
#345=ADVANCED_FACE('',(#338,#344),#332,.T.);
#346=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#347=DIRECTION('',(0.E0,0.E0,1.E0));
#348=DIRECTION('',(-1.E0,0.E0,0.E0));
#349=AXIS2_PLACEMENT_3D('',#346,#347,#348);
#350=SPHERICAL_SURFACE('',#349,9.5E0);
#352=ORIENTED_EDGE('',*,*,#351,.T.);
#354=ORIENTED_EDGE('',*,*,#353,.T.);
#356=ORIENTED_EDGE('',*,*,#355,.F.);
#357=ORIENTED_EDGE('',*,*,#333,.F.);
#358=EDGE_LOOP('',(#352,#354,#356,#357));
#359=FACE_OUTER_BOUND('',#358,.F.);
#360=ADVANCED_FACE('',(#359),#350,.T.);
#361=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#362=DIRECTION('',(0.E0,0.E0,1.E0));
#363=DIRECTION('',(-1.E0,0.E0,0.E0));
#364=AXIS2_PLACEMENT_3D('',#361,#362,#363);
#365=SPHERICAL_SURFACE('',#364,9.5E0);
#366=ORIENTED_EDGE('',*,*,#351,.F.);
#367=ORIENTED_EDGE('',*,*,#335,.T.);
#368=ORIENTED_EDGE('',*,*,#355,.T.);
#370=ORIENTED_EDGE('',*,*,#369,.F.);
#371=EDGE_LOOP('',(#366,#367,#368,#370));
#372=FACE_OUTER_BOUND('',#371,.F.);
#373=ADVANCED_FACE('',(#372),#365,.T.);
#374=CARTESIAN_POINT('',(0.E0,0.E0,2.725971592797E0));
#375=DIRECTION('',(0.E0,0.E0,-1.E0));
#376=DIRECTION('',(1.E0,0.E0,0.E0));
#377=AXIS2_PLACEMENT_3D('',#374,#375,#376);
#378=CONICAL_SURFACE('',#377,1.076568918039E1,7.2E1);
#380=ORIENTED_EDGE('',*,*,#379,.F.);
#382=ORIENTED_EDGE('',*,*,#381,.F.);
#383=ORIENTED_EDGE('',*,*,#369,.T.);
#385=ORIENTED_EDGE('',*,*,#384,.T.);
#387=ORIENTED_EDGE('',*,*,#386,.F.);
#389=ORIENTED_EDGE('',*,*,#388,.F.);
#391=ORIENTED_EDGE('',*,*,#390,.F.);
#393=ORIENTED_EDGE('',*,*,#392,.F.);
#394=EDGE_LOOP('',(#380,#382,#383,#385,#387,#389,#391,#393));
#395=FACE_OUTER_BOUND('',#394,.F.);
#396=ADVANCED_FACE('',(#395),#378,.T.);
#397=CARTESIAN_POINT('',(1.E1,1.E1,0.E0));
#398=DIRECTION('',(-1.E0,0.E0,0.E0));
#399=DIRECTION('',(0.E0,-1.E0,0.E0));
#400=AXIS2_PLACEMENT_3D('',#397,#398,#399);
#401=PLANE('',#400);
#402=ORIENTED_EDGE('',*,*,#379,.T.);
#404=ORIENTED_EDGE('',*,*,#403,.F.);
#406=ORIENTED_EDGE('',*,*,#405,.T.);
#408=ORIENTED_EDGE('',*,*,#407,.T.);
#410=ORIENTED_EDGE('',*,*,#409,.T.);
#411=EDGE_LOOP('',(#402,#404,#406,#408,#410));
#412=FACE_OUTER_BOUND('',#411,.F.);
#413=ADVANCED_FACE('',(#412),#401,.F.);
#414=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#415=DIRECTION('',(0.E0,0.E0,1.E0));
#416=DIRECTION('',(-1.E0,0.E0,0.E0));
#417=AXIS2_PLACEMENT_3D('',#414,#415,#416);
#418=CYLINDRICAL_SURFACE('',#417,1.3E1);
#419=ORIENTED_EDGE('',*,*,#403,.T.);
#420=ORIENTED_EDGE('',*,*,#392,.T.);
#422=ORIENTED_EDGE('',*,*,#421,.F.);
#424=ORIENTED_EDGE('',*,*,#423,.F.);
#425=EDGE_LOOP('',(#419,#420,#422,#424));
#426=FACE_OUTER_BOUND('',#425,.F.);
#427=ADVANCED_FACE('',(#426),#418,.T.);
#428=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#429=DIRECTION('',(0.E0,0.E0,1.E0));
#430=DIRECTION('',(-1.E0,0.E0,0.E0));
#431=AXIS2_PLACEMENT_3D('',#428,#429,#430);
#432=CYLINDRICAL_SURFACE('',#431,1.3E1);
#434=ORIENTED_EDGE('',*,*,#433,.F.);
#436=ORIENTED_EDGE('',*,*,#435,.F.);
#438=ORIENTED_EDGE('',*,*,#437,.T.);
#439=ORIENTED_EDGE('',*,*,#388,.T.);
#440=EDGE_LOOP('',(#434,#436,#438,#439));
#441=FACE_OUTER_BOUND('',#440,.F.);
#442=ADVANCED_FACE('',(#441),#432,.T.);
#443=CARTESIAN_POINT('',(-1.E1,1.E1,0.E0));
#444=DIRECTION('',(0.E0,-1.E0,0.E0));
#445=DIRECTION('',(1.E0,0.E0,0.E0));
#446=AXIS2_PLACEMENT_3D('',#443,#444,#445);
#447=PLANE('',#446);
#448=ORIENTED_EDGE('',*,*,#390,.T.);
#449=ORIENTED_EDGE('',*,*,#437,.F.);
#451=ORIENTED_EDGE('',*,*,#450,.T.);
#452=ORIENTED_EDGE('',*,*,#421,.T.);
#453=EDGE_LOOP('',(#448,#449,#451,#452));
#454=FACE_OUTER_BOUND('',#453,.F.);
#455=ADVANCED_FACE('',(#454),#447,.F.);
#456=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#457=DIRECTION('',(0.E0,0.E0,1.E0));
#458=DIRECTION('',(-1.E0,0.E0,0.E0));
#459=AXIS2_PLACEMENT_3D('',#456,#457,#458);
#460=PLANE('',#459);
#461=ORIENTED_EDGE('',*,*,#405,.F.);
#462=ORIENTED_EDGE('',*,*,#423,.T.);
#463=ORIENTED_EDGE('',*,*,#450,.F.);
#464=ORIENTED_EDGE('',*,*,#435,.T.);
#466=ORIENTED_EDGE('',*,*,#465,.F.);
#468=ORIENTED_EDGE('',*,*,#467,.F.);
#470=ORIENTED_EDGE('',*,*,#469,.F.);
#472=ORIENTED_EDGE('',*,*,#471,.F.);
#473=EDGE_LOOP('',(#461,#462,#463,#464,#466,#468,#470,#472));
#474=FACE_OUTER_BOUND('',#473,.F.);
#476=ORIENTED_EDGE('',*,*,#475,.T.);
#478=ORIENTED_EDGE('',*,*,#477,.F.);
#479=EDGE_LOOP('',(#476,#478));
#480=FACE_BOUND('',#479,.F.);
#481=ADVANCED_FACE('',(#474,#480),#460,.F.);
#482=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#483=DIRECTION('',(0.E0,0.E0,1.E0));
#484=DIRECTION('',(-1.E0,0.E0,0.E0));
#485=AXIS2_PLACEMENT_3D('',#482,#483,#484);
#486=CYLINDRICAL_SURFACE('',#485,5.E0);
#488=ORIENTED_EDGE('',*,*,#487,.T.);
#490=ORIENTED_EDGE('',*,*,#489,.T.);
#492=ORIENTED_EDGE('',*,*,#491,.F.);
#493=ORIENTED_EDGE('',*,*,#475,.F.);
#494=EDGE_LOOP('',(#488,#490,#492,#493));
#495=FACE_OUTER_BOUND('',#494,.F.);
#496=ADVANCED_FACE('',(#495),#486,.T.);
#497=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#498=DIRECTION('',(0.E0,0.E0,1.E0));
#499=DIRECTION('',(-1.E0,0.E0,0.E0));
#500=AXIS2_PLACEMENT_3D('',#497,#498,#499);
#501=CYLINDRICAL_SURFACE('',#500,5.E0);
#502=ORIENTED_EDGE('',*,*,#487,.F.);
#503=ORIENTED_EDGE('',*,*,#477,.T.);
#504=ORIENTED_EDGE('',*,*,#491,.T.);
#506=ORIENTED_EDGE('',*,*,#505,.F.);
#507=EDGE_LOOP('',(#502,#503,#504,#506));
#508=FACE_OUTER_BOUND('',#507,.F.);
#509=ADVANCED_FACE('',(#508),#501,.T.);
#510=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#511=DIRECTION('',(0.E0,0.E0,1.E0));
#512=DIRECTION('',(-1.E0,0.E0,0.E0));
#513=AXIS2_PLACEMENT_3D('',#510,#511,#512);
#514=PLANE('',#513);
#515=ORIENTED_EDGE('',*,*,#489,.F.);
#516=ORIENTED_EDGE('',*,*,#505,.T.);
#517=EDGE_LOOP('',(#515,#516));
#518=FACE_OUTER_BOUND('',#517,.F.);
#520=ORIENTED_EDGE('',*,*,#519,.F.);
#522=ORIENTED_EDGE('',*,*,#521,.F.);
#523=EDGE_LOOP('',(#520,#522));
#524=FACE_BOUND('',#523,.F.);
#525=ADVANCED_FACE('',(#518,#524),#514,.F.);
#526=CARTESIAN_POINT('',(0.E0,0.E0,-2.999999999400E0));
#527=DIRECTION('',(0.E0,0.E0,-1.E0));
#528=DIRECTION('',(0.E0,-1.E0,0.E0));
#529=AXIS2_PLACEMENT_3D('',#526,#527,#528);
#530=CONICAL_SURFACE('',#529,3.999999999400E0,4.5E1);
#531=ORIENTED_EDGE('',*,*,#519,.T.);
#533=ORIENTED_EDGE('',*,*,#532,.T.);
#535=ORIENTED_EDGE('',*,*,#534,.F.);
#537=ORIENTED_EDGE('',*,*,#536,.F.);
#538=EDGE_LOOP('',(#531,#533,#535,#537));
#539=FACE_OUTER_BOUND('',#538,.F.);
#540=ADVANCED_FACE('',(#539),#530,.F.);
#541=CARTESIAN_POINT('',(0.E0,0.E0,-2.999999999400E0));
#542=DIRECTION('',(0.E0,0.E0,-1.E0));
#543=DIRECTION('',(0.E0,-1.E0,0.E0));
#544=AXIS2_PLACEMENT_3D('',#541,#542,#543);
#545=CONICAL_SURFACE('',#544,3.999999999400E0,4.5E1);
#546=ORIENTED_EDGE('',*,*,#521,.T.);
#547=ORIENTED_EDGE('',*,*,#536,.T.);
#549=ORIENTED_EDGE('',*,*,#548,.F.);
#550=ORIENTED_EDGE('',*,*,#532,.F.);
#551=EDGE_LOOP('',(#546,#547,#549,#550));
#552=FACE_OUTER_BOUND('',#551,.F.);
#553=ADVANCED_FACE('',(#552),#545,.F.);
#554=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#555=DIRECTION('',(0.E0,0.E0,-1.E0));
#556=DIRECTION('',(1.E0,0.E0,0.E0));
#557=AXIS2_PLACEMENT_3D('',#554,#555,#556);
#558=CYLINDRICAL_SURFACE('',#557,3.5E0);
#559=ORIENTED_EDGE('',*,*,#548,.T.);
#561=ORIENTED_EDGE('',*,*,#560,.F.);
#562=ORIENTED_EDGE('',*,*,#341,.T.);
#564=ORIENTED_EDGE('',*,*,#563,.T.);
#565=EDGE_LOOP('',(#559,#561,#562,#564));
#566=FACE_OUTER_BOUND('',#565,.F.);
#567=ADVANCED_FACE('',(#566),#558,.F.);
#568=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#569=DIRECTION('',(0.E0,0.E0,-1.E0));
#570=DIRECTION('',(1.E0,0.E0,0.E0));
#571=AXIS2_PLACEMENT_3D('',#568,#569,#570);
#572=CYLINDRICAL_SURFACE('',#571,3.5E0);
#573=ORIENTED_EDGE('',*,*,#534,.T.);
#574=ORIENTED_EDGE('',*,*,#563,.F.);
#575=ORIENTED_EDGE('',*,*,#339,.T.);
#576=ORIENTED_EDGE('',*,*,#560,.T.);
#577=EDGE_LOOP('',(#573,#574,#575,#576));
#578=FACE_OUTER_BOUND('',#577,.F.);
#579=ADVANCED_FACE('',(#578),#572,.F.);
#580=CARTESIAN_POINT('',(-1.E1,-1.E1,0.E0));
#581=DIRECTION('',(1.E0,0.E0,0.E0));
#582=DIRECTION('',(0.E0,1.E0,0.E0));
#583=AXIS2_PLACEMENT_3D('',#580,#581,#582);
#584=PLANE('',#583);
#585=ORIENTED_EDGE('',*,*,#386,.T.);
#587=ORIENTED_EDGE('',*,*,#586,.T.);
#589=ORIENTED_EDGE('',*,*,#588,.F.);
#590=ORIENTED_EDGE('',*,*,#465,.T.);
#591=ORIENTED_EDGE('',*,*,#433,.T.);
#592=EDGE_LOOP('',(#585,#587,#589,#590,#591));
#593=FACE_OUTER_BOUND('',#592,.F.);
#594=ADVANCED_FACE('',(#593),#584,.F.);
#595=CARTESIAN_POINT('',(0.E0,0.E0,2.725971592797E0));
#596=DIRECTION('',(0.E0,0.E0,-1.E0));
#597=DIRECTION('',(1.E0,0.E0,0.E0));
#598=AXIS2_PLACEMENT_3D('',#595,#596,#597);
#599=CONICAL_SURFACE('',#598,1.076568918039E1,7.2E1);
#600=ORIENTED_EDGE('',*,*,#409,.F.);
#602=ORIENTED_EDGE('',*,*,#601,.T.);
#604=ORIENTED_EDGE('',*,*,#603,.F.);
#606=ORIENTED_EDGE('',*,*,#605,.T.);
#607=ORIENTED_EDGE('',*,*,#586,.F.);
#608=ORIENTED_EDGE('',*,*,#384,.F.);
#609=ORIENTED_EDGE('',*,*,#353,.F.);
#610=ORIENTED_EDGE('',*,*,#381,.T.);
#611=EDGE_LOOP('',(#600,#602,#604,#606,#607,#608,#609,#610));
#612=FACE_OUTER_BOUND('',#611,.F.);
#613=ADVANCED_FACE('',(#612),#599,.T.);
#614=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#615=DIRECTION('',(0.E0,0.E0,1.E0));
#616=DIRECTION('',(-1.E0,0.E0,0.E0));
#617=AXIS2_PLACEMENT_3D('',#614,#615,#616);
#618=CYLINDRICAL_SURFACE('',#617,1.3E1);
#619=ORIENTED_EDGE('',*,*,#407,.F.);
#620=ORIENTED_EDGE('',*,*,#471,.T.);
#622=ORIENTED_EDGE('',*,*,#621,.T.);
#623=ORIENTED_EDGE('',*,*,#601,.F.);
#624=EDGE_LOOP('',(#619,#620,#622,#623));
#625=FACE_OUTER_BOUND('',#624,.F.);
#626=ADVANCED_FACE('',(#625),#618,.T.);
#627=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#628=DIRECTION('',(0.E0,0.E0,1.E0));
#629=DIRECTION('',(-1.E0,0.E0,0.E0));
#630=AXIS2_PLACEMENT_3D('',#627,#628,#629);
#631=CYLINDRICAL_SURFACE('',#630,1.3E1);
#633=ORIENTED_EDGE('',*,*,#632,.F.);
#634=ORIENTED_EDGE('',*,*,#467,.T.);
#635=ORIENTED_EDGE('',*,*,#588,.T.);
#636=ORIENTED_EDGE('',*,*,#605,.F.);
#637=EDGE_LOOP('',(#633,#634,#635,#636));
#638=FACE_OUTER_BOUND('',#637,.F.);
#639=ADVANCED_FACE('',(#638),#631,.T.);
#640=CARTESIAN_POINT('',(1.E1,-1.E1,0.E0));
#641=DIRECTION('',(0.E0,1.E0,0.E0));
#642=DIRECTION('',(-1.E0,0.E0,0.E0));
#643=AXIS2_PLACEMENT_3D('',#640,#641,#642);
#644=PLANE('',#643);
#645=ORIENTED_EDGE('',*,*,#632,.T.);
#646=ORIENTED_EDGE('',*,*,#603,.T.);
#647=ORIENTED_EDGE('',*,*,#621,.F.);
#648=ORIENTED_EDGE('',*,*,#469,.T.);
#649=EDGE_LOOP('',(#645,#646,#647,#648));
#650=FACE_OUTER_BOUND('',#649,.F.);
#651=ADVANCED_FACE('',(#650),#644,.F.);
#652=CLOSED_SHELL('',(#345,#360,#373,#396,#413,#427,#442,#455,#481,#496,#509,
#525,#540,#553,#567,#579,#594,#613,#626,#639,#651));
#653=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#654=DIRECTION('',(0.E0,0.E0,-1.E0));
#655=DIRECTION('',(1.E0,0.E0,0.E0));
#656=AXIS2_PLACEMENT_3D('',#653,#654,#655);
#658=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#659=DIRECTION('',(0.E0,0.E0,1.E0));
#660=DIRECTION('',(-1.E0,0.E0,0.E0));
#661=AXIS2_PLACEMENT_3D('',#658,#659,#660);
#663=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#664=DIRECTION('',(0.E0,0.E0,-1.E0));
#665=DIRECTION('',(-1.E0,0.E0,0.E0));
#666=AXIS2_PLACEMENT_3D('',#663,#664,#665);
#668=DIRECTION('',(0.E0,0.E0,1.E0));
#669=VECTOR('',#668,1.1E1);
#670=CARTESIAN_POINT('',(4.E0,0.E0,-3.5E0));
#671=LINE('',#670,#669);
#672=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#673=DIRECTION('',(0.E0,0.E0,1.E0));
#674=DIRECTION('',(1.E0,0.E0,0.E0));
#675=AXIS2_PLACEMENT_3D('',#672,#673,#674);
#677=DIRECTION('',(0.E0,0.E0,1.E0));
#678=VECTOR('',#677,1.1E1);
#679=CARTESIAN_POINT('',(-4.E0,0.E0,-3.5E0));
#680=LINE('',#679,#678);
#681=CARTESIAN_POINT('',(4.E0,0.E0,7.5E0));
#682=CARTESIAN_POINT('',(-4.E0,0.E0,7.5E0));
#683=VERTEX_POINT('',#681);
#684=VERTEX_POINT('',#682);
#685=CARTESIAN_POINT('',(4.E0,0.E0,-3.5E0));
#686=VERTEX_POINT('',#685);
#687=CARTESIAN_POINT('',(-4.E0,0.E0,-3.5E0));
#688=VERTEX_POINT('',#687);
#689=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#690=DIRECTION('',(0.E0,0.E0,-1.E0));
#691=DIRECTION('',(1.E0,0.E0,0.E0));
#692=AXIS2_PLACEMENT_3D('',#689,#690,#691);
#693=CYLINDRICAL_SURFACE('',#692,4.E0);
#695=ORIENTED_EDGE('',*,*,#694,.T.);
#697=ORIENTED_EDGE('',*,*,#696,.F.);
#699=ORIENTED_EDGE('',*,*,#698,.T.);
#701=ORIENTED_EDGE('',*,*,#700,.T.);
#702=EDGE_LOOP('',(#695,#697,#699,#701));
#703=FACE_OUTER_BOUND('',#702,.F.);
#704=ADVANCED_FACE('',(#703),#693,.F.);
#705=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#706=DIRECTION('',(0.E0,0.E0,-1.E0));
#707=DIRECTION('',(1.E0,0.E0,0.E0));
#708=AXIS2_PLACEMENT_3D('',#705,#706,#707);
#709=CYLINDRICAL_SURFACE('',#708,4.E0);
#711=ORIENTED_EDGE('',*,*,#710,.T.);
#712=ORIENTED_EDGE('',*,*,#700,.F.);
#714=ORIENTED_EDGE('',*,*,#713,.T.);
#715=ORIENTED_EDGE('',*,*,#696,.T.);
#716=EDGE_LOOP('',(#711,#712,#714,#715));
#717=FACE_OUTER_BOUND('',#716,.F.);
#718=ADVANCED_FACE('',(#717),#709,.F.);
#719=OPEN_SHELL('',(#704,#718));
#720=MANIFOLD_SOLID_BREP('',#652);
#721=SHELL_BASED_SURFACE_MODEL('',(#719));
#722=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#723=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#724=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#725=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#724);
#726=(CONVERSION_BASED_UNIT('DEGREE',#725)NAMED_UNIT(#723)PLANE_ANGLE_UNIT());
#727=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#728=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.838487284174E-3),#722,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#729=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#728))GLOBAL_UNIT_ASSIGNED_CONTEXT((#722,#726,#727))REPRESENTATION_CONTEXT
('ID1','3'));
#732=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#733=DIRECTION('',(0.E0,0.E0,1.E0));
#734=DIRECTION('',(1.E0,0.E0,0.E0));
#737=SHAPE_REPRESENTATION_RELATIONSHIP('','',#736,#730);
#738=SHAPE_REPRESENTATION_RELATIONSHIP('','',#736,#731);
#739=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#740=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#739);
#741=DESIGN_CONTEXT('',#739,'design');
#742=MECHANICAL_CONTEXT('',#739,'mechanical');
#743=PRODUCT('11066_MATICA_UTORNA_M8_U10','11066_MATICA_UTORNA_M8_U10',
'NOT SPECIFIED',(#742));
#744=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#743,
.MADE.);
#748=PRODUCT_CATEGORY('part','');
#749=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#743));
#750=PRODUCT_CATEGORY_RELATIONSHIP('','',#748,#749);
#751=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#752=SECURITY_CLASSIFICATION('','',#751);
#753=CC_DESIGN_SECURITY_CLASSIFICATION(#752,(#744));
#754=APPROVAL_STATUS('approved');
#755=APPROVAL(#754,'');
#756=CC_DESIGN_APPROVAL(#755,(#752,#744,#745));
#757=CALENDAR_DATE(111,10,3);
#758=COORDINATED_UNIVERSAL_TIME_OFFSET(1,0,.AHEAD.);
#759=LOCAL_TIME(8,19,3.5E1,#758);
#760=DATE_AND_TIME(#757,#759);
#761=APPROVAL_DATE_TIME(#760,#755);
#762=DATE_TIME_ROLE('creation_date');
#763=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#760,#762,(#745));
#764=DATE_TIME_ROLE('classification_date');
#765=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#760,#764,(#752));
#766=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#767=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#768=PERSON_AND_ORGANIZATION(#766,#767);
#769=APPROVAL_ROLE('approver');
#770=APPROVAL_PERSON_ORGANIZATION(#768,#755,#769);
#771=PERSON_AND_ORGANIZATION_ROLE('creator');
#772=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#768,#771,(#744,#745));
#773=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#774=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#768,#773,(#744));
#775=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#776=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#768,#775,(#752));
#777=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#778=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#768,#777,(#743));
#6=CIRCLE('',#5,3.5E0);
#11=CIRCLE('',#10,3.5E0);
#16=CIRCLE('',#15,9.5E0);
#21=CIRCLE('',#20,9.5E0);
#26=CIRCLE('',#25,4.75E0);
#31=CIRCLE('',#30,4.75E0);
#36=CIRCLE('',#35,8.531378360785E0);
#46=B_SPLINE_CURVE_WITH_KNOTS('',3,(#37,#38,#39,#40,#41,#42,#43,#44,#45),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#64=B_SPLINE_CURVE_WITH_KNOTS('',3,(#55,#56,#57,#58,#59,#60,#61,#62,#63),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#69=CIRCLE('',#68,1.3E1);
#74=CIRCLE('',#73,1.3E1);
#90=B_SPLINE_CURVE_WITH_KNOTS('',3,(#75,#76,#77,#78,#79,#80,#81,#82,#83,#84,#85,
#86,#87,#88,#89),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,4),(0.E0,
8.333333333333E-2,1.666666666667E-1,2.5E-1,3.333333333333E-1,4.166666666667E-1,
5.E-1,5.833333333333E-1,6.666666666667E-1,7.5E-1,8.333333333333E-1,
9.166666666667E-1,1.E0),.UNSPECIFIED.);
#107=CIRCLE('',#106,1.3E1);
#116=CIRCLE('',#115,1.3E1);
#125=CIRCLE('',#124,1.3E1);
#134=CIRCLE('',#133,1.3E1);
#147=CIRCLE('',#146,5.E0);
#152=CIRCLE('',#151,5.E0);
#157=CIRCLE('',#156,5.E0);
#162=CIRCLE('',#161,5.E0);
#167=CIRCLE('',#166,4.5E0);
#172=CIRCLE('',#171,4.5E0);
#185=CIRCLE('',#184,3.5E0);
#198=CIRCLE('',#197,3.5E0);
#208=B_SPLINE_CURVE_WITH_KNOTS('',3,(#199,#200,#201,#202,#203,#204,#205,#206,
#207),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#218=B_SPLINE_CURVE_WITH_KNOTS('',3,(#209,#210,#211,#212,#213,#214,#215,#216,
#217),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#235=CIRCLE('',#234,8.531378360785E0);
#244=CIRCLE('',#243,1.3E1);
#249=CIRCLE('',#248,1.3E1);
#269=B_SPLINE_CURVE_WITH_KNOTS('',3,(#254,#255,#256,#257,#258,#259,#260,#261,
#262,#263,#264,#265,#266,#267,#268),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,
1,1,4),(0.E0,8.333333333333E-2,1.666666666667E-1,2.5E-1,3.333333333333E-1,
4.166666666667E-1,5.E-1,5.833333333333E-1,6.666666666667E-1,7.5E-1,
8.333333333333E-1,9.166666666667E-1,1.E0),.UNSPECIFIED.);
#333=EDGE_CURVE('',#313,#315,#26,.T.);
#335=EDGE_CURVE('',#313,#315,#31,.T.);
#339=EDGE_CURVE('',#318,#319,#6,.T.);
#341=EDGE_CURVE('',#319,#318,#11,.T.);
#351=EDGE_CURVE('',#313,#309,#16,.T.);
#353=EDGE_CURVE('',#309,#311,#235,.T.);
#355=EDGE_CURVE('',#315,#311,#21,.T.);
#369=EDGE_CURVE('',#309,#311,#36,.T.);
#379=EDGE_CURVE('',#282,#283,#46,.T.);
#381=EDGE_CURVE('',#309,#282,#239,.T.);
#384=EDGE_CURVE('',#311,#285,#230,.T.);
#386=EDGE_CURVE('',#284,#285,#208,.T.);
#388=EDGE_CURVE('',#287,#284,#74,.T.);
#390=EDGE_CURVE('',#286,#287,#90,.T.);
#392=EDGE_CURVE('',#283,#286,#69,.T.);
#403=EDGE_CURVE('',#289,#283,#50,.T.);
#405=EDGE_CURVE('',#289,#297,#102,.T.);
#407=EDGE_CURVE('',#297,#304,#54,.T.);
#409=EDGE_CURVE('',#304,#282,#64,.T.);
#421=EDGE_CURVE('',#293,#286,#98,.T.);
#423=EDGE_CURVE('',#289,#293,#107,.T.);
#433=EDGE_CURVE('',#291,#284,#226,.T.);
#435=EDGE_CURVE('',#295,#291,#116,.T.);
#437=EDGE_CURVE('',#295,#287,#94,.T.);
#450=EDGE_CURVE('',#295,#293,#111,.T.);
#465=EDGE_CURVE('',#303,#291,#120,.T.);
#467=EDGE_CURVE('',#301,#303,#125,.T.);
#469=EDGE_CURVE('',#300,#301,#129,.T.);
#471=EDGE_CURVE('',#297,#300,#134,.T.);
#475=EDGE_CURVE('',#276,#280,#147,.T.);
#477=EDGE_CURVE('',#276,#280,#152,.T.);
#487=EDGE_CURVE('',#276,#277,#138,.T.);
#489=EDGE_CURVE('',#277,#281,#157,.T.);
#491=EDGE_CURVE('',#280,#281,#142,.T.);
#505=EDGE_CURVE('',#277,#281,#162,.T.);
#519=EDGE_CURVE('',#322,#323,#167,.T.);
#521=EDGE_CURVE('',#323,#322,#172,.T.);
#532=EDGE_CURVE('',#323,#327,#180,.T.);
#534=EDGE_CURVE('',#326,#327,#198,.T.);
#536=EDGE_CURVE('',#322,#326,#176,.T.);
#548=EDGE_CURVE('',#327,#326,#185,.T.);
#560=EDGE_CURVE('',#319,#326,#189,.T.);
#563=EDGE_CURVE('',#318,#327,#193,.T.);
#586=EDGE_CURVE('',#285,#307,#218,.T.);
#588=EDGE_CURVE('',#303,#307,#222,.T.);
#601=EDGE_CURVE('',#304,#306,#244,.T.);
#603=EDGE_CURVE('',#305,#306,#269,.T.);
#605=EDGE_CURVE('',#305,#307,#249,.T.);
#621=EDGE_CURVE('',#300,#306,#273,.T.);
#632=EDGE_CURVE('',#301,#305,#253,.T.);
#657=CIRCLE('',#656,4.E0);
#662=CIRCLE('',#661,4.E0);
#667=CIRCLE('',#666,4.E0);
#676=CIRCLE('',#675,4.E0);
#694=EDGE_CURVE('',#683,#684,#657,.T.);
#696=EDGE_CURVE('',#688,#684,#680,.T.);
#698=EDGE_CURVE('',#688,#686,#662,.T.);
#700=EDGE_CURVE('',#686,#683,#671,.T.);
#710=EDGE_CURVE('',#684,#683,#667,.T.);
#713=EDGE_CURVE('',#686,#688,#676,.T.);
#730=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#720),#729);
#731=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#721),#729);
#735=AXIS2_PLACEMENT_3D('',#732,#733,#734);
#736=SHAPE_REPRESENTATION('',(#735),#729);
#745=PRODUCT_DEFINITION('design','',#744,#741);
#746=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11066_MATICA_UTORNA_M8_U10.',#745);
#747=SHAPE_DEFINITION_REPRESENTATION(#746,#736);
ENDSEC;
END-ISO-10303-21;