ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('11065_MATICA_UTORNA_M6_U10_','2011-03-10T',('Dino-2'),
('LIPRO d.o.o.'),'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009380',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009380','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#2=DIRECTION('',(0.E0,0.E0,-1.E0));
#3=DIRECTION('',(1.E0,0.E0,0.E0));
#4=AXIS2_PLACEMENT_3D('',#1,#2,#3);
#6=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#7=DIRECTION('',(0.E0,0.E0,-1.E0));
#8=DIRECTION('',(-1.E0,0.E0,0.E0));
#9=AXIS2_PLACEMENT_3D('',#6,#7,#8);
#11=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#12=DIRECTION('',(0.E0,1.E0,0.E0));
#13=DIRECTION('',(5.E-1,0.E0,8.660254037844E-1));
#14=AXIS2_PLACEMENT_3D('',#11,#12,#13);
#16=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#17=DIRECTION('',(0.E0,-1.E0,0.E0));
#18=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#19=AXIS2_PLACEMENT_3D('',#16,#17,#18);
#21=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#22=DIRECTION('',(0.E0,0.E0,-1.E0));
#23=DIRECTION('',(1.E0,0.E0,0.E0));
#24=AXIS2_PLACEMENT_3D('',#21,#22,#23);
#26=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#27=DIRECTION('',(0.E0,0.E0,1.E0));
#28=DIRECTION('',(1.E0,0.E0,0.E0));
#29=AXIS2_PLACEMENT_3D('',#26,#27,#28);
#31=CARTESIAN_POINT('',(0.E0,0.E0,3.451943185593E0));
#32=DIRECTION('',(0.E0,0.E0,1.E0));
#33=DIRECTION('',(1.E0,0.E0,0.E0));
#34=AXIS2_PLACEMENT_3D('',#31,#32,#33);
#36=CARTESIAN_POINT('',(1.E1,0.E0,2.974759088699E0));
#37=CARTESIAN_POINT('',(1.E1,4.542535904050E-1,2.974759088699E0));
#38=CARTESIAN_POINT('',(1.E1,1.359614648178E0,2.954564940899E0));
#39=CARTESIAN_POINT('',(1.E1,2.708662589385E0,2.866467907947E0));
#40=CARTESIAN_POINT('',(1.E1,4.047388923164E0,2.726485546828E0));
#41=CARTESIAN_POINT('',(1.E1,5.397987390494E0,2.538439252025E0));
#42=CARTESIAN_POINT('',(1.E1,6.788078332201E0,2.303262132040E0));
#43=CARTESIAN_POINT('',(1.E1,7.790550898872E0,2.107144119330E0));
#44=CARTESIAN_POINT('',(1.E1,8.306623862918E0,2.E0));
#46=DIRECTION('',(0.E0,0.E0,1.E0));
#47=VECTOR('',#46,2.E0);
#48=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#49=LINE('',#48,#47);
#50=DIRECTION('',(0.E0,0.E0,1.E0));
#51=VECTOR('',#50,2.E0);
#52=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,0.E0));
#53=LINE('',#52,#51);
#54=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,2.E0));
#55=CARTESIAN_POINT('',(1.E1,-7.790149188010E0,2.107227520243E0));
#56=CARTESIAN_POINT('',(1.E1,-6.787006093487E0,2.303466638891E0));
#57=CARTESIAN_POINT('',(1.E1,-5.396212614933E0,2.538719126597E0));
#58=CARTESIAN_POINT('',(1.E1,-4.045515885690E0,2.726713075123E0));
#59=CARTESIAN_POINT('',(1.E1,-2.707214063378E0,2.866584451521E0));
#60=CARTESIAN_POINT('',(1.E1,-1.358811004628E0,2.954590219589E0));
#61=CARTESIAN_POINT('',(1.E1,-4.539677766517E-1,2.974759088699E0));
#62=CARTESIAN_POINT('',(1.E1,0.E0,2.974759088699E0));
#64=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#65=DIRECTION('',(0.E0,0.E0,1.E0));
#66=DIRECTION('',(7.692307692308E-1,6.389710663783E-1,0.E0));
#67=AXIS2_PLACEMENT_3D('',#64,#65,#66);
#69=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#70=DIRECTION('',(0.E0,0.E0,1.E0));
#71=DIRECTION('',(-6.389710663783E-1,7.692307692308E-1,0.E0));
#72=AXIS2_PLACEMENT_3D('',#69,#70,#71);
#74=CARTESIAN_POINT('',(8.306623862918E0,1.E1,2.E0));
#75=CARTESIAN_POINT('',(7.773865882301E0,1.E1,2.110608167112E0));
#76=CARTESIAN_POINT('',(6.744927172706E0,1.E1,2.311399769426E0));
#77=CARTESIAN_POINT('',(5.339823586489E0,1.E1,2.547500933853E0));
#78=CARTESIAN_POINT('',(3.988076786808E0,1.E1,2.733664898520E0));
#79=CARTESIAN_POINT('',(2.660558679500E0,1.E1,2.870326636435E0));
#80=CARTESIAN_POINT('',(1.332749358224E0,1.E1,2.955413554602E0));
#81=CARTESIAN_POINT('',(-1.069591900137E-3,1.E1,2.984454876633E0));
#82=CARTESIAN_POINT('',(-1.334885123849E0,1.E1,2.955321359664E0));
#83=CARTESIAN_POINT('',(-2.662612345594E0,1.E1,2.870148714341E0));
#84=CARTESIAN_POINT('',(-3.989486199122E0,1.E1,2.733486036353E0));
#85=CARTESIAN_POINT('',(-5.340600191625E0,1.E1,2.547374044157E0));
#86=CARTESIAN_POINT('',(-6.744968421971E0,1.E1,2.311387795329E0));
#87=CARTESIAN_POINT('',(-7.773837824384E0,1.E1,2.110613992336E0));
#88=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,2.E0));
#90=DIRECTION('',(0.E0,0.E0,1.E0));
#91=VECTOR('',#90,2.E0);
#92=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#93=LINE('',#92,#91);
#94=DIRECTION('',(0.E0,0.E0,1.E0));
#95=VECTOR('',#94,2.E0);
#96=CARTESIAN_POINT('',(8.306623862918E0,1.E1,0.E0));
#97=LINE('',#96,#95);
#98=DIRECTION('',(0.E0,-1.E0,0.E0));
#99=VECTOR('',#98,1.661324772584E1);
#100=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#101=LINE('',#100,#99);
#102=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#103=DIRECTION('',(0.E0,0.E0,1.E0));
#104=DIRECTION('',(7.692307692308E-1,6.389710663783E-1,0.E0));
#105=AXIS2_PLACEMENT_3D('',#102,#103,#104);
#107=DIRECTION('',(1.E0,0.E0,0.E0));
#108=VECTOR('',#107,1.661324772584E1);
#109=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#110=LINE('',#109,#108);
#111=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#112=DIRECTION('',(0.E0,0.E0,1.E0));
#113=DIRECTION('',(-6.389710663783E-1,7.692307692308E-1,0.E0));
#114=AXIS2_PLACEMENT_3D('',#111,#112,#113);
#116=DIRECTION('',(0.E0,1.E0,0.E0));
#117=VECTOR('',#116,1.661324772584E1);
#118=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#119=LINE('',#118,#117);
#120=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#121=DIRECTION('',(0.E0,0.E0,-1.E0));
#122=DIRECTION('',(-6.389710663783E-1,-7.692307692308E-1,0.E0));
#123=AXIS2_PLACEMENT_3D('',#120,#121,#122);
#125=DIRECTION('',(-1.E0,0.E0,0.E0));
#126=VECTOR('',#125,1.661324772584E1);
#127=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#128=LINE('',#127,#126);
#129=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#130=DIRECTION('',(0.E0,0.E0,-1.E0));
#131=DIRECTION('',(7.692307692308E-1,-6.389710663783E-1,0.E0));
#132=AXIS2_PLACEMENT_3D('',#129,#130,#131);
#134=DIRECTION('',(0.E0,0.E0,-1.E0));
#135=VECTOR('',#134,3.5E0);
#136=CARTESIAN_POINT('',(5.E0,0.E0,0.E0));
#137=LINE('',#136,#135);
#138=DIRECTION('',(0.E0,0.E0,-1.E0));
#139=VECTOR('',#138,3.5E0);
#140=CARTESIAN_POINT('',(-5.E0,0.E0,0.E0));
#141=LINE('',#140,#139);
#142=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#143=DIRECTION('',(0.E0,0.E0,-1.E0));
#144=DIRECTION('',(1.E0,0.E0,0.E0));
#145=AXIS2_PLACEMENT_3D('',#142,#143,#144);
#147=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#148=DIRECTION('',(0.E0,0.E0,1.E0));
#149=DIRECTION('',(1.E0,0.E0,0.E0));
#150=AXIS2_PLACEMENT_3D('',#147,#148,#149);
#152=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#153=DIRECTION('',(0.E0,0.E0,-1.E0));
#154=DIRECTION('',(1.E0,0.E0,0.E0));
#155=AXIS2_PLACEMENT_3D('',#152,#153,#154);
#157=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#158=DIRECTION('',(0.E0,0.E0,1.E0));
#159=DIRECTION('',(1.E0,0.E0,0.E0));
#160=AXIS2_PLACEMENT_3D('',#157,#158,#159);
#162=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#163=DIRECTION('',(0.E0,0.E0,1.E0));
#164=DIRECTION('',(-1.E0,0.E0,0.E0));
#165=AXIS2_PLACEMENT_3D('',#162,#163,#164);
#167=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#168=DIRECTION('',(0.E0,0.E0,1.E0));
#169=DIRECTION('',(1.E0,0.E0,0.E0));
#170=AXIS2_PLACEMENT_3D('',#167,#168,#169);
#172=DIRECTION('',(7.071067811865E-1,1.050463948412E-9,7.071067811865E-1));
#173=VECTOR('',#172,1.414213561418E0);
#174=CARTESIAN_POINT('',(-3.624999998521E0,-3.251459256485E-9,
-3.499999998521E0));
#175=LINE('',#174,#173);
#176=DIRECTION('',(-7.071067811865E-1,-1.050464181075E-9,7.071067811865E-1));
#177=VECTOR('',#176,1.414213561418E0);
#178=CARTESIAN_POINT('',(3.624999998521E0,3.251459767870E-9,-3.499999998521E0));
#179=LINE('',#178,#177);
#180=CARTESIAN_POINT('',(0.E0,0.E0,-2.5E0));
#181=DIRECTION('',(0.E0,0.E0,1.E0));
#182=DIRECTION('',(1.E0,0.E0,0.E0));
#183=AXIS2_PLACEMENT_3D('',#180,#181,#182);
#185=DIRECTION('',(8.031282306510E-11,-1.765878895002E-10,-1.E0));
#186=VECTOR('',#185,9.999999999197E0);
#187=CARTESIAN_POINT('',(-2.625E0,0.E0,7.5E0));
#188=LINE('',#187,#186);
#189=DIRECTION('',(-8.031282306510E-11,1.765879077352E-10,-1.E0));
#190=VECTOR('',#189,9.999999999197E0);
#191=CARTESIAN_POINT('',(2.625E0,0.E0,7.5E0));
#192=LINE('',#191,#190);
#193=CARTESIAN_POINT('',(0.E0,0.E0,-2.5E0));
#194=DIRECTION('',(0.E0,0.E0,1.E0));
#195=DIRECTION('',(-1.E0,0.E0,0.E0));
#196=AXIS2_PLACEMENT_3D('',#193,#194,#195);
#198=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,2.E0));
#199=CARTESIAN_POINT('',(-1.E1,7.790149188010E0,2.107227520243E0));
#200=CARTESIAN_POINT('',(-1.E1,6.787006093487E0,2.303466638891E0));
#201=CARTESIAN_POINT('',(-1.E1,5.396212614933E0,2.538719126597E0));
#202=CARTESIAN_POINT('',(-1.E1,4.045515885690E0,2.726713075123E0));
#203=CARTESIAN_POINT('',(-1.E1,2.707214063378E0,2.866584451521E0));
#204=CARTESIAN_POINT('',(-1.E1,1.358811004628E0,2.954590219589E0));
#205=CARTESIAN_POINT('',(-1.E1,4.539677766517E-1,2.974759088699E0));
#206=CARTESIAN_POINT('',(-1.E1,0.E0,2.974759088699E0));
#208=CARTESIAN_POINT('',(-1.E1,0.E0,2.974759088699E0));
#209=CARTESIAN_POINT('',(-1.E1,-4.542535904050E-1,2.974759088699E0));
#210=CARTESIAN_POINT('',(-1.E1,-1.359614648178E0,2.954564940899E0));
#211=CARTESIAN_POINT('',(-1.E1,-2.708662589385E0,2.866467907947E0));
#212=CARTESIAN_POINT('',(-1.E1,-4.047388923164E0,2.726485546828E0));
#213=CARTESIAN_POINT('',(-1.E1,-5.397987390494E0,2.538439252025E0));
#214=CARTESIAN_POINT('',(-1.E1,-6.788078332201E0,2.303262132040E0));
#215=CARTESIAN_POINT('',(-1.E1,-7.790550898872E0,2.107144119330E0));
#216=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,2.E0));
#218=DIRECTION('',(0.E0,0.E0,1.E0));
#219=VECTOR('',#218,2.E0);
#220=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#221=LINE('',#220,#219);
#222=DIRECTION('',(0.E0,0.E0,1.E0));
#223=VECTOR('',#222,2.E0);
#224=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,0.E0));
#225=LINE('',#224,#223);
#226=DIRECTION('',(-9.510565162952E-1,0.E0,-3.090169943749E-1));
#227=VECTOR('',#226,1.544200175333E0);
#228=CARTESIAN_POINT('',(-8.531378360785E0,0.E0,3.451943185593E0));
#229=LINE('',#228,#227);
#230=CARTESIAN_POINT('',(0.E0,0.E0,3.451943185593E0));
#231=DIRECTION('',(0.E0,0.E0,-1.E0));
#232=DIRECTION('',(1.E0,0.E0,0.E0));
#233=AXIS2_PLACEMENT_3D('',#230,#231,#232);
#235=DIRECTION('',(9.510565162952E-1,0.E0,-3.090169943749E-1));
#236=VECTOR('',#235,1.544200175333E0);
#237=CARTESIAN_POINT('',(8.531378360785E0,0.E0,3.451943185593E0));
#238=LINE('',#237,#236);
#239=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#240=DIRECTION('',(0.E0,0.E0,-1.E0));
#241=DIRECTION('',(7.692307692308E-1,-6.389710663783E-1,0.E0));
#242=AXIS2_PLACEMENT_3D('',#239,#240,#241);
#244=CARTESIAN_POINT('',(0.E0,0.E0,2.E0));
#245=DIRECTION('',(0.E0,0.E0,-1.E0));
#246=DIRECTION('',(-6.389710663783E-1,-7.692307692308E-1,0.E0));
#247=AXIS2_PLACEMENT_3D('',#244,#245,#246);
#249=DIRECTION('',(0.E0,0.E0,1.E0));
#250=VECTOR('',#249,2.E0);
#251=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,0.E0));
#252=LINE('',#251,#250);
#253=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,2.E0));
#254=CARTESIAN_POINT('',(-7.773865882301E0,-1.E1,2.110608167112E0));
#255=CARTESIAN_POINT('',(-6.744927172706E0,-1.E1,2.311399769426E0));
#256=CARTESIAN_POINT('',(-5.339823586489E0,-1.E1,2.547500933853E0));
#257=CARTESIAN_POINT('',(-3.988076786808E0,-1.E1,2.733664898520E0));
#258=CARTESIAN_POINT('',(-2.660558679500E0,-1.E1,2.870326636435E0));
#259=CARTESIAN_POINT('',(-1.332749358224E0,-1.E1,2.955413554602E0));
#260=CARTESIAN_POINT('',(1.069591900131E-3,-1.E1,2.984454876633E0));
#261=CARTESIAN_POINT('',(1.334885123849E0,-1.E1,2.955321359664E0));
#262=CARTESIAN_POINT('',(2.662612345594E0,-1.E1,2.870148714341E0));
#263=CARTESIAN_POINT('',(3.989486199122E0,-1.E1,2.733486036353E0));
#264=CARTESIAN_POINT('',(5.340600191625E0,-1.E1,2.547374044157E0));
#265=CARTESIAN_POINT('',(6.744968421971E0,-1.E1,2.311387795329E0));
#266=CARTESIAN_POINT('',(7.773837824384E0,-1.E1,2.110613992336E0));
#267=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,2.E0));
#269=DIRECTION('',(0.E0,0.E0,1.E0));
#270=VECTOR('',#269,2.E0);
#271=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#272=LINE('',#271,#270);
#273=CARTESIAN_POINT('',(5.E0,0.E0,0.E0));
#274=CARTESIAN_POINT('',(5.E0,0.E0,-3.5E0));
#275=VERTEX_POINT('',#273);
#276=VERTEX_POINT('',#274);
#277=CARTESIAN_POINT('',(-5.E0,0.E0,0.E0));
#278=CARTESIAN_POINT('',(-5.E0,0.E0,-3.5E0));
#279=VERTEX_POINT('',#277);
#280=VERTEX_POINT('',#278);
#281=VERTEX_POINT('',#36);
#282=VERTEX_POINT('',#44);
#283=VERTEX_POINT('',#198);
#284=VERTEX_POINT('',#206);
#285=VERTEX_POINT('',#74);
#286=VERTEX_POINT('',#88);
#287=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#288=VERTEX_POINT('',#287);
#289=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,0.E0));
#290=VERTEX_POINT('',#289);
#291=CARTESIAN_POINT('',(8.306623862918E0,1.E1,0.E0));
#292=VERTEX_POINT('',#291);
#293=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#294=VERTEX_POINT('',#293);
#295=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,0.E0));
#296=VERTEX_POINT('',#295);
#297=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#298=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,0.E0));
#299=VERTEX_POINT('',#297);
#300=VERTEX_POINT('',#298);
#301=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#302=VERTEX_POINT('',#301);
#303=VERTEX_POINT('',#54);
#304=VERTEX_POINT('',#253);
#305=VERTEX_POINT('',#267);
#306=VERTEX_POINT('',#216);
#307=CARTESIAN_POINT('',(8.531378360785E0,0.E0,3.451943185593E0));
#308=VERTEX_POINT('',#307);
#309=CARTESIAN_POINT('',(-8.531378360785E0,0.E0,3.451943185593E0));
#310=VERTEX_POINT('',#309);
#311=CARTESIAN_POINT('',(4.75E0,0.E0,7.5E0));
#312=VERTEX_POINT('',#311);
#313=CARTESIAN_POINT('',(-4.75E0,0.E0,7.5E0));
#314=VERTEX_POINT('',#313);
#315=CARTESIAN_POINT('',(2.625E0,0.E0,7.5E0));
#316=CARTESIAN_POINT('',(-2.625E0,0.E0,7.5E0));
#317=VERTEX_POINT('',#315);
#318=VERTEX_POINT('',#316);
#319=CARTESIAN_POINT('',(-3.625E0,0.E0,-3.5E0));
#320=CARTESIAN_POINT('',(3.625E0,0.E0,-3.5E0));
#321=VERTEX_POINT('',#319);
#322=VERTEX_POINT('',#320);
#323=CARTESIAN_POINT('',(-2.625E0,0.E0,-2.5E0));
#324=CARTESIAN_POINT('',(2.625E0,0.E0,-2.5E0));
#325=VERTEX_POINT('',#323);
#326=VERTEX_POINT('',#324);
#327=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#328=DIRECTION('',(0.E0,0.E0,1.E0));
#329=DIRECTION('',(-1.E0,0.E0,0.E0));
#330=AXIS2_PLACEMENT_3D('',#327,#328,#329);
#331=PLANE('',#330);
#333=ORIENTED_EDGE('',*,*,#332,.T.);
#335=ORIENTED_EDGE('',*,*,#334,.F.);
#336=EDGE_LOOP('',(#333,#335));
#337=FACE_OUTER_BOUND('',#336,.F.);
#339=ORIENTED_EDGE('',*,*,#338,.F.);
#341=ORIENTED_EDGE('',*,*,#340,.F.);
#342=EDGE_LOOP('',(#339,#341));
#343=FACE_BOUND('',#342,.F.);
#344=ADVANCED_FACE('',(#337,#343),#331,.T.);
#345=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#346=DIRECTION('',(0.E0,0.E0,1.E0));
#347=DIRECTION('',(-1.E0,0.E0,0.E0));
#348=AXIS2_PLACEMENT_3D('',#345,#346,#347);
#349=SPHERICAL_SURFACE('',#348,9.5E0);
#351=ORIENTED_EDGE('',*,*,#350,.T.);
#353=ORIENTED_EDGE('',*,*,#352,.T.);
#355=ORIENTED_EDGE('',*,*,#354,.F.);
#356=ORIENTED_EDGE('',*,*,#332,.F.);
#357=EDGE_LOOP('',(#351,#353,#355,#356));
#358=FACE_OUTER_BOUND('',#357,.F.);
#359=ADVANCED_FACE('',(#358),#349,.T.);
#360=CARTESIAN_POINT('',(0.E0,0.E0,-7.272413359522E-1));
#361=DIRECTION('',(0.E0,0.E0,1.E0));
#362=DIRECTION('',(-1.E0,0.E0,0.E0));
#363=AXIS2_PLACEMENT_3D('',#360,#361,#362);
#364=SPHERICAL_SURFACE('',#363,9.5E0);
#365=ORIENTED_EDGE('',*,*,#350,.F.);
#366=ORIENTED_EDGE('',*,*,#334,.T.);
#367=ORIENTED_EDGE('',*,*,#354,.T.);
#369=ORIENTED_EDGE('',*,*,#368,.F.);
#370=EDGE_LOOP('',(#365,#366,#367,#369));
#371=FACE_OUTER_BOUND('',#370,.F.);
#372=ADVANCED_FACE('',(#371),#364,.T.);
#373=CARTESIAN_POINT('',(0.E0,0.E0,2.725971592797E0));
#374=DIRECTION('',(0.E0,0.E0,-1.E0));
#375=DIRECTION('',(1.E0,0.E0,0.E0));
#376=AXIS2_PLACEMENT_3D('',#373,#374,#375);
#377=CONICAL_SURFACE('',#376,1.076568918039E1,7.2E1);
#379=ORIENTED_EDGE('',*,*,#378,.F.);
#381=ORIENTED_EDGE('',*,*,#380,.F.);
#382=ORIENTED_EDGE('',*,*,#368,.T.);
#384=ORIENTED_EDGE('',*,*,#383,.T.);
#386=ORIENTED_EDGE('',*,*,#385,.F.);
#388=ORIENTED_EDGE('',*,*,#387,.F.);
#390=ORIENTED_EDGE('',*,*,#389,.F.);
#392=ORIENTED_EDGE('',*,*,#391,.F.);
#393=EDGE_LOOP('',(#379,#381,#382,#384,#386,#388,#390,#392));
#394=FACE_OUTER_BOUND('',#393,.F.);
#395=ADVANCED_FACE('',(#394),#377,.T.);
#396=CARTESIAN_POINT('',(1.E1,1.E1,0.E0));
#397=DIRECTION('',(-1.E0,0.E0,0.E0));
#398=DIRECTION('',(0.E0,-1.E0,0.E0));
#399=AXIS2_PLACEMENT_3D('',#396,#397,#398);
#400=PLANE('',#399);
#401=ORIENTED_EDGE('',*,*,#378,.T.);
#403=ORIENTED_EDGE('',*,*,#402,.F.);
#405=ORIENTED_EDGE('',*,*,#404,.T.);
#407=ORIENTED_EDGE('',*,*,#406,.T.);
#409=ORIENTED_EDGE('',*,*,#408,.T.);
#410=EDGE_LOOP('',(#401,#403,#405,#407,#409));
#411=FACE_OUTER_BOUND('',#410,.F.);
#412=ADVANCED_FACE('',(#411),#400,.F.);
#413=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#414=DIRECTION('',(0.E0,0.E0,1.E0));
#415=DIRECTION('',(-1.E0,0.E0,0.E0));
#416=AXIS2_PLACEMENT_3D('',#413,#414,#415);
#417=CYLINDRICAL_SURFACE('',#416,1.3E1);
#418=ORIENTED_EDGE('',*,*,#402,.T.);
#419=ORIENTED_EDGE('',*,*,#391,.T.);
#421=ORIENTED_EDGE('',*,*,#420,.F.);
#423=ORIENTED_EDGE('',*,*,#422,.F.);
#424=EDGE_LOOP('',(#418,#419,#421,#423));
#425=FACE_OUTER_BOUND('',#424,.F.);
#426=ADVANCED_FACE('',(#425),#417,.T.);
#427=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#428=DIRECTION('',(0.E0,0.E0,1.E0));
#429=DIRECTION('',(-1.E0,0.E0,0.E0));
#430=AXIS2_PLACEMENT_3D('',#427,#428,#429);
#431=CYLINDRICAL_SURFACE('',#430,1.3E1);
#433=ORIENTED_EDGE('',*,*,#432,.F.);
#435=ORIENTED_EDGE('',*,*,#434,.F.);
#437=ORIENTED_EDGE('',*,*,#436,.T.);
#438=ORIENTED_EDGE('',*,*,#387,.T.);
#439=EDGE_LOOP('',(#433,#435,#437,#438));
#440=FACE_OUTER_BOUND('',#439,.F.);
#441=ADVANCED_FACE('',(#440),#431,.T.);
#442=CARTESIAN_POINT('',(-1.E1,1.E1,0.E0));
#443=DIRECTION('',(0.E0,-1.E0,0.E0));
#444=DIRECTION('',(1.E0,0.E0,0.E0));
#445=AXIS2_PLACEMENT_3D('',#442,#443,#444);
#446=PLANE('',#445);
#447=ORIENTED_EDGE('',*,*,#389,.T.);
#448=ORIENTED_EDGE('',*,*,#436,.F.);
#450=ORIENTED_EDGE('',*,*,#449,.T.);
#451=ORIENTED_EDGE('',*,*,#420,.T.);
#452=EDGE_LOOP('',(#447,#448,#450,#451));
#453=FACE_OUTER_BOUND('',#452,.F.);
#454=ADVANCED_FACE('',(#453),#446,.F.);
#455=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#456=DIRECTION('',(0.E0,0.E0,1.E0));
#457=DIRECTION('',(-1.E0,0.E0,0.E0));
#458=AXIS2_PLACEMENT_3D('',#455,#456,#457);
#459=PLANE('',#458);
#460=ORIENTED_EDGE('',*,*,#404,.F.);
#461=ORIENTED_EDGE('',*,*,#422,.T.);
#462=ORIENTED_EDGE('',*,*,#449,.F.);
#463=ORIENTED_EDGE('',*,*,#434,.T.);
#465=ORIENTED_EDGE('',*,*,#464,.F.);
#467=ORIENTED_EDGE('',*,*,#466,.F.);
#469=ORIENTED_EDGE('',*,*,#468,.F.);
#471=ORIENTED_EDGE('',*,*,#470,.F.);
#472=EDGE_LOOP('',(#460,#461,#462,#463,#465,#467,#469,#471));
#473=FACE_OUTER_BOUND('',#472,.F.);
#475=ORIENTED_EDGE('',*,*,#474,.T.);
#477=ORIENTED_EDGE('',*,*,#476,.F.);
#478=EDGE_LOOP('',(#475,#477));
#479=FACE_BOUND('',#478,.F.);
#480=ADVANCED_FACE('',(#473,#479),#459,.F.);
#481=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#482=DIRECTION('',(0.E0,0.E0,1.E0));
#483=DIRECTION('',(-1.E0,0.E0,0.E0));
#484=AXIS2_PLACEMENT_3D('',#481,#482,#483);
#485=CYLINDRICAL_SURFACE('',#484,5.E0);
#487=ORIENTED_EDGE('',*,*,#486,.T.);
#489=ORIENTED_EDGE('',*,*,#488,.T.);
#491=ORIENTED_EDGE('',*,*,#490,.F.);
#492=ORIENTED_EDGE('',*,*,#474,.F.);
#493=EDGE_LOOP('',(#487,#489,#491,#492));
#494=FACE_OUTER_BOUND('',#493,.F.);
#495=ADVANCED_FACE('',(#494),#485,.T.);
#496=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#497=DIRECTION('',(0.E0,0.E0,1.E0));
#498=DIRECTION('',(-1.E0,0.E0,0.E0));
#499=AXIS2_PLACEMENT_3D('',#496,#497,#498);
#500=CYLINDRICAL_SURFACE('',#499,5.E0);
#501=ORIENTED_EDGE('',*,*,#486,.F.);
#502=ORIENTED_EDGE('',*,*,#476,.T.);
#503=ORIENTED_EDGE('',*,*,#490,.T.);
#505=ORIENTED_EDGE('',*,*,#504,.F.);
#506=EDGE_LOOP('',(#501,#502,#503,#505));
#507=FACE_OUTER_BOUND('',#506,.F.);
#508=ADVANCED_FACE('',(#507),#500,.T.);
#509=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#510=DIRECTION('',(0.E0,0.E0,1.E0));
#511=DIRECTION('',(-1.E0,0.E0,0.E0));
#512=AXIS2_PLACEMENT_3D('',#509,#510,#511);
#513=PLANE('',#512);
#514=ORIENTED_EDGE('',*,*,#488,.F.);
#515=ORIENTED_EDGE('',*,*,#504,.T.);
#516=EDGE_LOOP('',(#514,#515));
#517=FACE_OUTER_BOUND('',#516,.F.);
#519=ORIENTED_EDGE('',*,*,#518,.F.);
#521=ORIENTED_EDGE('',*,*,#520,.F.);
#522=EDGE_LOOP('',(#519,#521));
#523=FACE_BOUND('',#522,.F.);
#524=ADVANCED_FACE('',(#517,#523),#513,.F.);
#525=CARTESIAN_POINT('',(0.E0,0.E0,-2.999999999145E0));
#526=DIRECTION('',(0.E0,0.E0,-1.E0));
#527=DIRECTION('',(0.E0,-1.E0,0.E0));
#528=AXIS2_PLACEMENT_3D('',#525,#526,#527);
#529=CONICAL_SURFACE('',#528,3.124999999145E0,4.5E1);
#530=ORIENTED_EDGE('',*,*,#518,.T.);
#532=ORIENTED_EDGE('',*,*,#531,.T.);
#534=ORIENTED_EDGE('',*,*,#533,.F.);
#536=ORIENTED_EDGE('',*,*,#535,.F.);
#537=EDGE_LOOP('',(#530,#532,#534,#536));
#538=FACE_OUTER_BOUND('',#537,.F.);
#539=ADVANCED_FACE('',(#538),#529,.F.);
#540=CARTESIAN_POINT('',(0.E0,0.E0,-2.999999999145E0));
#541=DIRECTION('',(0.E0,0.E0,-1.E0));
#542=DIRECTION('',(0.E0,-1.E0,0.E0));
#543=AXIS2_PLACEMENT_3D('',#540,#541,#542);
#544=CONICAL_SURFACE('',#543,3.124999999145E0,4.5E1);
#545=ORIENTED_EDGE('',*,*,#520,.T.);
#546=ORIENTED_EDGE('',*,*,#535,.T.);
#548=ORIENTED_EDGE('',*,*,#547,.F.);
#549=ORIENTED_EDGE('',*,*,#531,.F.);
#550=EDGE_LOOP('',(#545,#546,#548,#549));
#551=FACE_OUTER_BOUND('',#550,.F.);
#552=ADVANCED_FACE('',(#551),#544,.F.);
#553=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#554=DIRECTION('',(0.E0,0.E0,-1.E0));
#555=DIRECTION('',(1.E0,0.E0,0.E0));
#556=AXIS2_PLACEMENT_3D('',#553,#554,#555);
#557=CYLINDRICAL_SURFACE('',#556,2.625E0);
#558=ORIENTED_EDGE('',*,*,#547,.T.);
#560=ORIENTED_EDGE('',*,*,#559,.F.);
#561=ORIENTED_EDGE('',*,*,#340,.T.);
#563=ORIENTED_EDGE('',*,*,#562,.T.);
#564=EDGE_LOOP('',(#558,#560,#561,#563));
#565=FACE_OUTER_BOUND('',#564,.F.);
#566=ADVANCED_FACE('',(#565),#557,.F.);
#567=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#568=DIRECTION('',(0.E0,0.E0,-1.E0));
#569=DIRECTION('',(1.E0,0.E0,0.E0));
#570=AXIS2_PLACEMENT_3D('',#567,#568,#569);
#571=CYLINDRICAL_SURFACE('',#570,2.625E0);
#572=ORIENTED_EDGE('',*,*,#533,.T.);
#573=ORIENTED_EDGE('',*,*,#562,.F.);
#574=ORIENTED_EDGE('',*,*,#338,.T.);
#575=ORIENTED_EDGE('',*,*,#559,.T.);
#576=EDGE_LOOP('',(#572,#573,#574,#575));
#577=FACE_OUTER_BOUND('',#576,.F.);
#578=ADVANCED_FACE('',(#577),#571,.F.);
#579=CARTESIAN_POINT('',(-1.E1,-1.E1,0.E0));
#580=DIRECTION('',(1.E0,0.E0,0.E0));
#581=DIRECTION('',(0.E0,1.E0,0.E0));
#582=AXIS2_PLACEMENT_3D('',#579,#580,#581);
#583=PLANE('',#582);
#584=ORIENTED_EDGE('',*,*,#385,.T.);
#586=ORIENTED_EDGE('',*,*,#585,.T.);
#588=ORIENTED_EDGE('',*,*,#587,.F.);
#589=ORIENTED_EDGE('',*,*,#464,.T.);
#590=ORIENTED_EDGE('',*,*,#432,.T.);
#591=EDGE_LOOP('',(#584,#586,#588,#589,#590));
#592=FACE_OUTER_BOUND('',#591,.F.);
#593=ADVANCED_FACE('',(#592),#583,.F.);
#594=CARTESIAN_POINT('',(0.E0,0.E0,2.725971592797E0));
#595=DIRECTION('',(0.E0,0.E0,-1.E0));
#596=DIRECTION('',(1.E0,0.E0,0.E0));
#597=AXIS2_PLACEMENT_3D('',#594,#595,#596);
#598=CONICAL_SURFACE('',#597,1.076568918039E1,7.2E1);
#599=ORIENTED_EDGE('',*,*,#408,.F.);
#601=ORIENTED_EDGE('',*,*,#600,.T.);
#603=ORIENTED_EDGE('',*,*,#602,.F.);
#605=ORIENTED_EDGE('',*,*,#604,.T.);
#606=ORIENTED_EDGE('',*,*,#585,.F.);
#607=ORIENTED_EDGE('',*,*,#383,.F.);
#608=ORIENTED_EDGE('',*,*,#352,.F.);
#609=ORIENTED_EDGE('',*,*,#380,.T.);
#610=EDGE_LOOP('',(#599,#601,#603,#605,#606,#607,#608,#609));
#611=FACE_OUTER_BOUND('',#610,.F.);
#612=ADVANCED_FACE('',(#611),#598,.T.);
#613=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#614=DIRECTION('',(0.E0,0.E0,1.E0));
#615=DIRECTION('',(-1.E0,0.E0,0.E0));
#616=AXIS2_PLACEMENT_3D('',#613,#614,#615);
#617=CYLINDRICAL_SURFACE('',#616,1.3E1);
#618=ORIENTED_EDGE('',*,*,#406,.F.);
#619=ORIENTED_EDGE('',*,*,#470,.T.);
#621=ORIENTED_EDGE('',*,*,#620,.T.);
#622=ORIENTED_EDGE('',*,*,#600,.F.);
#623=EDGE_LOOP('',(#618,#619,#621,#622));
#624=FACE_OUTER_BOUND('',#623,.F.);
#625=ADVANCED_FACE('',(#624),#617,.T.);
#626=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#627=DIRECTION('',(0.E0,0.E0,1.E0));
#628=DIRECTION('',(-1.E0,0.E0,0.E0));
#629=AXIS2_PLACEMENT_3D('',#626,#627,#628);
#630=CYLINDRICAL_SURFACE('',#629,1.3E1);
#632=ORIENTED_EDGE('',*,*,#631,.F.);
#633=ORIENTED_EDGE('',*,*,#466,.T.);
#634=ORIENTED_EDGE('',*,*,#587,.T.);
#635=ORIENTED_EDGE('',*,*,#604,.F.);
#636=EDGE_LOOP('',(#632,#633,#634,#635));
#637=FACE_OUTER_BOUND('',#636,.F.);
#638=ADVANCED_FACE('',(#637),#630,.T.);
#639=CARTESIAN_POINT('',(1.E1,-1.E1,0.E0));
#640=DIRECTION('',(0.E0,1.E0,0.E0));
#641=DIRECTION('',(-1.E0,0.E0,0.E0));
#642=AXIS2_PLACEMENT_3D('',#639,#640,#641);
#643=PLANE('',#642);
#644=ORIENTED_EDGE('',*,*,#631,.T.);
#645=ORIENTED_EDGE('',*,*,#602,.T.);
#646=ORIENTED_EDGE('',*,*,#620,.F.);
#647=ORIENTED_EDGE('',*,*,#468,.T.);
#648=EDGE_LOOP('',(#644,#645,#646,#647));
#649=FACE_OUTER_BOUND('',#648,.F.);
#650=ADVANCED_FACE('',(#649),#643,.F.);
#651=CLOSED_SHELL('',(#344,#359,#372,#395,#412,#426,#441,#454,#480,#495,#508,
#524,#539,#552,#566,#578,#593,#612,#625,#638,#650));
#652=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#653=DIRECTION('',(0.E0,0.E0,-1.E0));
#654=DIRECTION('',(1.E0,0.E0,0.E0));
#655=AXIS2_PLACEMENT_3D('',#652,#653,#654);
#657=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#658=DIRECTION('',(0.E0,0.E0,1.E0));
#659=DIRECTION('',(-1.E0,0.E0,0.E0));
#660=AXIS2_PLACEMENT_3D('',#657,#658,#659);
#662=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#663=DIRECTION('',(0.E0,0.E0,-1.E0));
#664=DIRECTION('',(-1.E0,0.E0,0.E0));
#665=AXIS2_PLACEMENT_3D('',#662,#663,#664);
#667=DIRECTION('',(0.E0,0.E0,1.E0));
#668=VECTOR('',#667,1.1E1);
#669=CARTESIAN_POINT('',(3.E0,0.E0,-3.5E0));
#670=LINE('',#669,#668);
#671=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#672=DIRECTION('',(0.E0,0.E0,1.E0));
#673=DIRECTION('',(1.E0,0.E0,0.E0));
#674=AXIS2_PLACEMENT_3D('',#671,#672,#673);
#676=DIRECTION('',(0.E0,0.E0,1.E0));
#677=VECTOR('',#676,1.1E1);
#678=CARTESIAN_POINT('',(-3.E0,0.E0,-3.5E0));
#679=LINE('',#678,#677);
#680=CARTESIAN_POINT('',(3.E0,0.E0,7.5E0));
#681=CARTESIAN_POINT('',(-3.E0,0.E0,7.5E0));
#682=VERTEX_POINT('',#680);
#683=VERTEX_POINT('',#681);
#684=CARTESIAN_POINT('',(3.E0,0.E0,-3.5E0));
#685=VERTEX_POINT('',#684);
#686=CARTESIAN_POINT('',(-3.E0,0.E0,-3.5E0));
#687=VERTEX_POINT('',#686);
#688=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#689=DIRECTION('',(0.E0,0.E0,-1.E0));
#690=DIRECTION('',(1.E0,0.E0,0.E0));
#691=AXIS2_PLACEMENT_3D('',#688,#689,#690);
#692=CYLINDRICAL_SURFACE('',#691,3.E0);
#694=ORIENTED_EDGE('',*,*,#693,.T.);
#696=ORIENTED_EDGE('',*,*,#695,.F.);
#698=ORIENTED_EDGE('',*,*,#697,.T.);
#700=ORIENTED_EDGE('',*,*,#699,.T.);
#701=EDGE_LOOP('',(#694,#696,#698,#700));
#702=FACE_OUTER_BOUND('',#701,.F.);
#703=ADVANCED_FACE('',(#702),#692,.F.);
#704=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#705=DIRECTION('',(0.E0,0.E0,-1.E0));
#706=DIRECTION('',(1.E0,0.E0,0.E0));
#707=AXIS2_PLACEMENT_3D('',#704,#705,#706);
#708=CYLINDRICAL_SURFACE('',#707,3.E0);
#710=ORIENTED_EDGE('',*,*,#709,.T.);
#711=ORIENTED_EDGE('',*,*,#699,.F.);
#713=ORIENTED_EDGE('',*,*,#712,.T.);
#714=ORIENTED_EDGE('',*,*,#695,.T.);
#715=EDGE_LOOP('',(#710,#711,#713,#714));
#716=FACE_OUTER_BOUND('',#715,.F.);
#717=ADVANCED_FACE('',(#716),#708,.F.);
#718=OPEN_SHELL('',(#703,#717));
#719=MANIFOLD_SOLID_BREP('',#651);
#720=SHELL_BASED_SURFACE_MODEL('',(#718));
#721=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#722=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#723=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#724=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#723);
#725=(CONVERSION_BASED_UNIT('DEGREE',#724)NAMED_UNIT(#722)PLANE_ANGLE_UNIT());
#726=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#727=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.838487284174E-3),#721,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#728=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#727))GLOBAL_UNIT_ASSIGNED_CONTEXT((#721,#725,#726))REPRESENTATION_CONTEXT
('ID1','3'));
#731=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#732=DIRECTION('',(0.E0,0.E0,1.E0));
#733=DIRECTION('',(1.E0,0.E0,0.E0));
#736=SHAPE_REPRESENTATION_RELATIONSHIP('','',#735,#729);
#737=SHAPE_REPRESENTATION_RELATIONSHIP('','',#735,#730);
#738=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#739=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#738);
#740=DESIGN_CONTEXT('',#738,'design');
#741=MECHANICAL_CONTEXT('',#738,'mechanical');
#742=PRODUCT('11065_MATICA_UTORNA_M6_U10_','11065_MATICA_UTORNA_M6_U10_',
'NOT SPECIFIED',(#741));
#743=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#742,
.MADE.);
#747=PRODUCT_CATEGORY('part','');
#748=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#742));
#749=PRODUCT_CATEGORY_RELATIONSHIP('','',#747,#748);
#750=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#751=SECURITY_CLASSIFICATION('','',#750);
#752=CC_DESIGN_SECURITY_CLASSIFICATION(#751,(#743));
#753=APPROVAL_STATUS('approved');
#754=APPROVAL(#753,'');
#755=CC_DESIGN_APPROVAL(#754,(#751,#743,#744));
#756=CALENDAR_DATE(111,10,3);
#757=COORDINATED_UNIVERSAL_TIME_OFFSET(1,0,.AHEAD.);
#758=LOCAL_TIME(7,57,2.E0,#757);
#759=DATE_AND_TIME(#756,#758);
#760=APPROVAL_DATE_TIME(#759,#754);
#761=DATE_TIME_ROLE('creation_date');
#762=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#759,#761,(#744));
#763=DATE_TIME_ROLE('classification_date');
#764=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#759,#763,(#751));
#765=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#766=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#767=PERSON_AND_ORGANIZATION(#765,#766);
#768=APPROVAL_ROLE('approver');
#769=APPROVAL_PERSON_ORGANIZATION(#767,#754,#768);
#770=PERSON_AND_ORGANIZATION_ROLE('creator');
#771=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#767,#770,(#743,#744));
#772=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#773=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#767,#772,(#743));
#774=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#775=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#767,#774,(#751));
#776=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#777=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#767,#776,(#742));
#5=CIRCLE('',#4,2.625E0);
#10=CIRCLE('',#9,2.625E0);
#15=CIRCLE('',#14,9.5E0);
#20=CIRCLE('',#19,9.5E0);
#25=CIRCLE('',#24,4.75E0);
#30=CIRCLE('',#29,4.75E0);
#35=CIRCLE('',#34,8.531378360785E0);
#45=B_SPLINE_CURVE_WITH_KNOTS('',3,(#36,#37,#38,#39,#40,#41,#42,#43,#44),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#63=B_SPLINE_CURVE_WITH_KNOTS('',3,(#54,#55,#56,#57,#58,#59,#60,#61,#62),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#68=CIRCLE('',#67,1.3E1);
#73=CIRCLE('',#72,1.3E1);
#89=B_SPLINE_CURVE_WITH_KNOTS('',3,(#74,#75,#76,#77,#78,#79,#80,#81,#82,#83,#84,
#85,#86,#87,#88),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,4),(0.E0,
8.333333333333E-2,1.666666666667E-1,2.5E-1,3.333333333333E-1,4.166666666667E-1,
5.E-1,5.833333333333E-1,6.666666666667E-1,7.5E-1,8.333333333333E-1,
9.166666666667E-1,1.E0),.UNSPECIFIED.);
#106=CIRCLE('',#105,1.3E1);
#115=CIRCLE('',#114,1.3E1);
#124=CIRCLE('',#123,1.3E1);
#133=CIRCLE('',#132,1.3E1);
#146=CIRCLE('',#145,5.E0);
#151=CIRCLE('',#150,5.E0);
#156=CIRCLE('',#155,5.E0);
#161=CIRCLE('',#160,5.E0);
#166=CIRCLE('',#165,3.625E0);
#171=CIRCLE('',#170,3.625E0);
#184=CIRCLE('',#183,2.625E0);
#197=CIRCLE('',#196,2.625E0);
#207=B_SPLINE_CURVE_WITH_KNOTS('',3,(#198,#199,#200,#201,#202,#203,#204,#205,
#206),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#217=B_SPLINE_CURVE_WITH_KNOTS('',3,(#208,#209,#210,#211,#212,#213,#214,#215,
#216),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#234=CIRCLE('',#233,8.531378360785E0);
#243=CIRCLE('',#242,1.3E1);
#248=CIRCLE('',#247,1.3E1);
#268=B_SPLINE_CURVE_WITH_KNOTS('',3,(#253,#254,#255,#256,#257,#258,#259,#260,
#261,#262,#263,#264,#265,#266,#267),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,
1,1,4),(0.E0,8.333333333333E-2,1.666666666667E-1,2.5E-1,3.333333333333E-1,
4.166666666667E-1,5.E-1,5.833333333333E-1,6.666666666667E-1,7.5E-1,
8.333333333333E-1,9.166666666667E-1,1.E0),.UNSPECIFIED.);
#332=EDGE_CURVE('',#312,#314,#25,.T.);
#334=EDGE_CURVE('',#312,#314,#30,.T.);
#338=EDGE_CURVE('',#317,#318,#5,.T.);
#340=EDGE_CURVE('',#318,#317,#10,.T.);
#350=EDGE_CURVE('',#312,#308,#15,.T.);
#352=EDGE_CURVE('',#308,#310,#234,.T.);
#354=EDGE_CURVE('',#314,#310,#20,.T.);
#368=EDGE_CURVE('',#308,#310,#35,.T.);
#378=EDGE_CURVE('',#281,#282,#45,.T.);
#380=EDGE_CURVE('',#308,#281,#238,.T.);
#383=EDGE_CURVE('',#310,#284,#229,.T.);
#385=EDGE_CURVE('',#283,#284,#207,.T.);
#387=EDGE_CURVE('',#286,#283,#73,.T.);
#389=EDGE_CURVE('',#285,#286,#89,.T.);
#391=EDGE_CURVE('',#282,#285,#68,.T.);
#402=EDGE_CURVE('',#288,#282,#49,.T.);
#404=EDGE_CURVE('',#288,#296,#101,.T.);
#406=EDGE_CURVE('',#296,#303,#53,.T.);
#408=EDGE_CURVE('',#303,#281,#63,.T.);
#420=EDGE_CURVE('',#292,#285,#97,.T.);
#422=EDGE_CURVE('',#288,#292,#106,.T.);
#432=EDGE_CURVE('',#290,#283,#225,.T.);
#434=EDGE_CURVE('',#294,#290,#115,.T.);
#436=EDGE_CURVE('',#294,#286,#93,.T.);
#449=EDGE_CURVE('',#294,#292,#110,.T.);
#464=EDGE_CURVE('',#302,#290,#119,.T.);
#466=EDGE_CURVE('',#300,#302,#124,.T.);
#468=EDGE_CURVE('',#299,#300,#128,.T.);
#470=EDGE_CURVE('',#296,#299,#133,.T.);
#474=EDGE_CURVE('',#275,#279,#146,.T.);
#476=EDGE_CURVE('',#275,#279,#151,.T.);
#486=EDGE_CURVE('',#275,#276,#137,.T.);
#488=EDGE_CURVE('',#276,#280,#156,.T.);
#490=EDGE_CURVE('',#279,#280,#141,.T.);
#504=EDGE_CURVE('',#276,#280,#161,.T.);
#518=EDGE_CURVE('',#321,#322,#166,.T.);
#520=EDGE_CURVE('',#322,#321,#171,.T.);
#531=EDGE_CURVE('',#322,#326,#179,.T.);
#533=EDGE_CURVE('',#325,#326,#197,.T.);
#535=EDGE_CURVE('',#321,#325,#175,.T.);
#547=EDGE_CURVE('',#326,#325,#184,.T.);
#559=EDGE_CURVE('',#318,#325,#188,.T.);
#562=EDGE_CURVE('',#317,#326,#192,.T.);
#585=EDGE_CURVE('',#284,#306,#217,.T.);
#587=EDGE_CURVE('',#302,#306,#221,.T.);
#600=EDGE_CURVE('',#303,#305,#243,.T.);
#602=EDGE_CURVE('',#304,#305,#268,.T.);
#604=EDGE_CURVE('',#304,#306,#248,.T.);
#620=EDGE_CURVE('',#299,#305,#272,.T.);
#631=EDGE_CURVE('',#300,#304,#252,.T.);
#656=CIRCLE('',#655,3.E0);
#661=CIRCLE('',#660,3.E0);
#666=CIRCLE('',#665,3.E0);
#675=CIRCLE('',#674,3.E0);
#693=EDGE_CURVE('',#682,#683,#656,.T.);
#695=EDGE_CURVE('',#687,#683,#679,.T.);
#697=EDGE_CURVE('',#687,#685,#661,.T.);
#699=EDGE_CURVE('',#685,#682,#670,.T.);
#709=EDGE_CURVE('',#683,#682,#666,.T.);
#712=EDGE_CURVE('',#685,#687,#675,.T.);
#729=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#719),#728);
#730=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#720),#728);
#734=AXIS2_PLACEMENT_3D('',#731,#732,#733);
#735=SHAPE_REPRESENTATION('',(#734),#728);
#744=PRODUCT_DEFINITION('design','',#743,#740);
#745=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11065_MATICA_UTORNA_M6_U10_.',#744);
#746=SHAPE_DEFINITION_REPRESENTATION(#745,#735);
ENDSEC;
END-ISO-10303-21;