ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('11140_SPOJNI_SET_STRANSKI_U8U10_ASM','2011-03-10T',('Dino-2'),(
'LIPRO d.o.o.'),'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009380',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009380','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#3=DIRECTION('',(0.E0,1.E0,0.E0));
#4=DIRECTION('',(1.E0,0.E0,0.E0));
#5=AXIS2_PLACEMENT_3D('',#2,#3,#4);
#7=DIRECTION('',(-7.071067811866E-1,-7.071067811865E-1,0.E0));
#8=VECTOR('',#7,8.485281374239E-1);
#9=CARTESIAN_POINT('',(-3.4E0,1.4E1,0.E0));
#10=LINE('',#9,#8);
#11=CARTESIAN_POINT('',(0.E0,1.34E1,0.E0));
#12=DIRECTION('',(0.E0,1.E0,0.E0));
#13=DIRECTION('',(1.E0,0.E0,0.E0));
#14=AXIS2_PLACEMENT_3D('',#11,#12,#13);
#16=DIRECTION('',(7.071067811866E-1,-7.071067811865E-1,0.E0));
#17=VECTOR('',#16,8.485281374239E-1);
#18=CARTESIAN_POINT('',(3.4E0,1.4E1,0.E0));
#19=LINE('',#18,#17);
#20=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#21=DIRECTION('',(0.E0,1.E0,0.E0));
#22=DIRECTION('',(-1.E0,0.E0,0.E0));
#23=AXIS2_PLACEMENT_3D('',#20,#21,#22);
#25=CARTESIAN_POINT('',(0.E0,1.34E1,0.E0));
#26=DIRECTION('',(0.E0,1.E0,0.E0));
#27=DIRECTION('',(-1.E0,0.E0,0.E0));
#28=AXIS2_PLACEMENT_3D('',#25,#26,#27);
#30=DIRECTION('',(0.E0,1.E0,0.E0));
#31=VECTOR('',#30,1.34E1);
#32=CARTESIAN_POINT('',(-4.E0,0.E0,0.E0));
#33=LINE('',#32,#31);
#34=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#35=DIRECTION('',(0.E0,-1.E0,0.E0));
#36=DIRECTION('',(1.E0,0.E0,0.E0));
#37=AXIS2_PLACEMENT_3D('',#34,#35,#36);
#39=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#40=DIRECTION('',(0.E0,-1.E0,0.E0));
#41=DIRECTION('',(-1.E0,0.E0,0.E0));
#42=AXIS2_PLACEMENT_3D('',#39,#40,#41);
#44=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#45=DIRECTION('',(0.E0,1.E0,0.E0));
#46=DIRECTION('',(1.E0,0.E0,0.E0));
#47=AXIS2_PLACEMENT_3D('',#44,#45,#46);
#49=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#50=DIRECTION('',(0.E0,1.E0,0.E0));
#51=DIRECTION('',(-1.E0,0.E0,0.E0));
#52=AXIS2_PLACEMENT_3D('',#49,#50,#51);
#54=DIRECTION('',(0.E0,-1.E0,0.E0));
#55=VECTOR('',#54,5.E-1);
#56=CARTESIAN_POINT('',(7.E0,0.E0,0.E0));
#57=LINE('',#56,#55);
#58=CARTESIAN_POINT('',(0.E0,-5.E-1,0.E0));
#59=DIRECTION('',(0.E0,-1.E0,0.E0));
#60=DIRECTION('',(-1.E0,0.E0,0.E0));
#61=AXIS2_PLACEMENT_3D('',#58,#59,#60);
#63=CARTESIAN_POINT('',(0.E0,-5.E-1,0.E0));
#64=DIRECTION('',(0.E0,-1.E0,0.E0));
#65=DIRECTION('',(0.E0,0.E0,1.E0));
#66=AXIS2_PLACEMENT_3D('',#63,#64,#65);
#68=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#69=DIRECTION('',(0.E0,-1.E0,0.E0));
#70=DIRECTION('',(0.E0,0.E0,1.E0));
#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
#73=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#74=VECTOR('',#73,2.886751345948E0);
#75=CARTESIAN_POINT('',(0.E0,-4.4E0,2.886751345948E0));
#76=LINE('',#75,#74);
#77=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#78=DIRECTION('',(0.E0,-1.E0,0.E0));
#79=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#80=AXIS2_PLACEMENT_3D('',#77,#78,#79);
#82=DIRECTION('',(0.E0,0.E0,-1.E0));
#83=VECTOR('',#82,2.886751345948E0);
#84=CARTESIAN_POINT('',(-2.5E0,-4.4E0,1.443375672974E0));
#85=LINE('',#84,#83);
#86=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#87=DIRECTION('',(0.E0,-1.E0,0.E0));
#88=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#89=AXIS2_PLACEMENT_3D('',#86,#87,#88);
#91=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#92=VECTOR('',#91,2.886751345948E0);
#93=CARTESIAN_POINT('',(-2.5E0,-4.4E0,-1.443375672974E0));
#94=LINE('',#93,#92);
#95=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#96=DIRECTION('',(0.E0,-1.E0,0.E0));
#97=DIRECTION('',(0.E0,0.E0,-1.E0));
#98=AXIS2_PLACEMENT_3D('',#95,#96,#97);
#100=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#101=VECTOR('',#100,2.886751345948E0);
#102=CARTESIAN_POINT('',(0.E0,-4.4E0,-2.886751345948E0));
#103=LINE('',#102,#101);
#104=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#105=DIRECTION('',(0.E0,-1.E0,0.E0));
#106=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#107=AXIS2_PLACEMENT_3D('',#104,#105,#106);
#109=DIRECTION('',(0.E0,0.E0,1.E0));
#110=VECTOR('',#109,2.886751345948E0);
#111=CARTESIAN_POINT('',(2.5E0,-4.4E0,-1.443375672974E0));
#112=LINE('',#111,#110);
#113=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#114=DIRECTION('',(0.E0,-1.E0,0.E0));
#115=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#116=AXIS2_PLACEMENT_3D('',#113,#114,#115);
#118=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#119=VECTOR('',#118,2.886751345948E0);
#120=CARTESIAN_POINT('',(2.5E0,-4.4E0,1.443375672974E0));
#121=LINE('',#120,#119);
#122=DIRECTION('',(0.E0,1.E0,0.E0));
#123=VECTOR('',#122,2.6E0);
#124=CARTESIAN_POINT('',(0.E0,-4.4E0,2.886751345948E0));
#125=LINE('',#124,#123);
#126=DIRECTION('',(0.E0,1.E0,0.E0));
#127=VECTOR('',#126,2.6E0);
#128=CARTESIAN_POINT('',(2.5E0,-4.4E0,1.443375672974E0));
#129=LINE('',#128,#127);
#130=DIRECTION('',(0.E0,1.E0,0.E0));
#131=VECTOR('',#130,2.6E0);
#132=CARTESIAN_POINT('',(2.5E0,-4.4E0,-1.443375672974E0));
#133=LINE('',#132,#131);
#134=DIRECTION('',(0.E0,1.E0,0.E0));
#135=VECTOR('',#134,2.6E0);
#136=CARTESIAN_POINT('',(0.E0,-4.4E0,-2.886751345948E0));
#137=LINE('',#136,#135);
#138=DIRECTION('',(0.E0,1.E0,0.E0));
#139=VECTOR('',#138,2.6E0);
#140=CARTESIAN_POINT('',(-2.5E0,-4.4E0,-1.443375672974E0));
#141=LINE('',#140,#139);
#142=DIRECTION('',(0.E0,1.E0,0.E0));
#143=VECTOR('',#142,2.6E0);
#144=CARTESIAN_POINT('',(-2.5E0,-4.4E0,1.443375672974E0));
#145=LINE('',#144,#143);
#146=DIRECTION('',(0.E0,0.E0,1.E0));
#147=VECTOR('',#146,2.886751345948E0);
#148=CARTESIAN_POINT('',(2.5E0,-1.8E0,-1.443375672974E0));
#149=LINE('',#148,#147);
#150=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#151=VECTOR('',#150,2.886751345948E0);
#152=CARTESIAN_POINT('',(0.E0,-1.8E0,-2.886751345948E0));
#153=LINE('',#152,#151);
#154=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#155=VECTOR('',#154,2.886751345948E0);
#156=CARTESIAN_POINT('',(-2.5E0,-1.8E0,-1.443375672974E0));
#157=LINE('',#156,#155);
#158=DIRECTION('',(0.E0,0.E0,-1.E0));
#159=VECTOR('',#158,2.886751345948E0);
#160=CARTESIAN_POINT('',(-2.5E0,-1.8E0,1.443375672974E0));
#161=LINE('',#160,#159);
#162=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#163=VECTOR('',#162,2.886751345948E0);
#164=CARTESIAN_POINT('',(0.E0,-1.8E0,2.886751345948E0));
#165=LINE('',#164,#163);
#166=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#167=VECTOR('',#166,2.886751345948E0);
#168=CARTESIAN_POINT('',(2.5E0,-1.8E0,1.443375672974E0));
#169=LINE('',#168,#167);
#170=CARTESIAN_POINT('',(0.E0,2.763675213675E0,0.E0));
#171=DIRECTION('',(-1.E0,0.E0,0.E0));
#172=DIRECTION('',(0.E0,-9.275235106829E-1,3.737648152656E-1));
#173=AXIS2_PLACEMENT_3D('',#170,#171,#172);
#175=CARTESIAN_POINT('',(0.E0,-5.E-1,0.E0));
#176=DIRECTION('',(0.E0,-1.E0,0.E0));
#177=DIRECTION('',(1.E0,0.E0,0.E0));
#178=AXIS2_PLACEMENT_3D('',#175,#176,#177);
#180=CARTESIAN_POINT('',(0.E0,-5.E-1,0.E0));
#181=DIRECTION('',(0.E0,-1.E0,0.E0));
#182=DIRECTION('',(0.E0,0.E0,-1.E0));
#183=AXIS2_PLACEMENT_3D('',#180,#181,#182);
#185=CARTESIAN_POINT('',(0.E0,2.763675213675E0,0.E0));
#186=DIRECTION('',(1.E0,0.E0,0.E0));
#187=DIRECTION('',(0.E0,-9.275235106829E-1,-3.737648152656E-1));
#188=AXIS2_PLACEMENT_3D('',#185,#186,#187);
#190=DIRECTION('',(0.E0,-1.E0,0.E0));
#191=VECTOR('',#190,5.E-1);
#192=CARTESIAN_POINT('',(-7.E0,0.E0,0.E0));
#193=LINE('',#192,#191);
#194=DIRECTION('',(0.E0,1.E0,0.E0));
#195=VECTOR('',#194,1.34E1);
#196=CARTESIAN_POINT('',(4.E0,0.E0,0.E0));
#197=LINE('',#196,#195);
#198=CARTESIAN_POINT('',(7.E0,0.E0,0.E0));
#199=CARTESIAN_POINT('',(-7.E0,0.E0,0.E0));
#200=VERTEX_POINT('',#198);
#201=VERTEX_POINT('',#199);
#202=CARTESIAN_POINT('',(4.E0,0.E0,0.E0));
#203=CARTESIAN_POINT('',(-4.E0,0.E0,0.E0));
#204=VERTEX_POINT('',#202);
#205=VERTEX_POINT('',#203);
#206=CARTESIAN_POINT('',(2.5E0,-1.8E0,-1.443375672974E0));
#207=CARTESIAN_POINT('',(2.5E0,-1.8E0,1.443375672974E0));
#208=VERTEX_POINT('',#206);
#209=VERTEX_POINT('',#207);
#210=CARTESIAN_POINT('',(0.E0,-1.8E0,2.886751345948E0));
#211=VERTEX_POINT('',#210);
#212=CARTESIAN_POINT('',(-2.5E0,-1.8E0,1.443375672974E0));
#213=VERTEX_POINT('',#212);
#214=CARTESIAN_POINT('',(-2.5E0,-1.8E0,-1.443375672974E0));
#215=VERTEX_POINT('',#214);
#216=CARTESIAN_POINT('',(0.E0,-1.8E0,-2.886751345948E0));
#217=VERTEX_POINT('',#216);
#218=CARTESIAN_POINT('',(2.5E0,-4.4E0,-1.443375672974E0));
#219=VERTEX_POINT('',#218);
#220=CARTESIAN_POINT('',(2.5E0,-4.4E0,1.443375672974E0));
#221=VERTEX_POINT('',#220);
#222=CARTESIAN_POINT('',(0.E0,-4.4E0,2.886751345948E0));
#223=VERTEX_POINT('',#222);
#224=CARTESIAN_POINT('',(-2.5E0,-4.4E0,1.443375672974E0));
#225=VERTEX_POINT('',#224);
#226=CARTESIAN_POINT('',(-2.5E0,-4.4E0,-1.443375672974E0));
#227=VERTEX_POINT('',#226);
#228=CARTESIAN_POINT('',(0.E0,-4.4E0,-2.886751345948E0));
#229=VERTEX_POINT('',#228);
#230=CARTESIAN_POINT('',(-3.4E0,1.4E1,0.E0));
#231=CARTESIAN_POINT('',(3.4E0,1.4E1,0.E0));
#232=VERTEX_POINT('',#230);
#233=VERTEX_POINT('',#231);
#234=CARTESIAN_POINT('',(-4.E0,1.34E1,0.E0));
#235=CARTESIAN_POINT('',(4.E0,1.34E1,0.E0));
#236=VERTEX_POINT('',#234);
#237=VERTEX_POINT('',#235);
#238=CARTESIAN_POINT('',(0.E0,-5.E-1,7.E0));
#239=CARTESIAN_POINT('',(-7.E0,-5.E-1,0.E0));
#240=VERTEX_POINT('',#238);
#241=VERTEX_POINT('',#239);
#242=CARTESIAN_POINT('',(7.E0,-5.E-1,0.E0));
#243=VERTEX_POINT('',#242);
#244=CARTESIAN_POINT('',(0.E0,-5.E-1,-7.E0));
#245=VERTEX_POINT('',#244);
#246=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#247=DIRECTION('',(0.E0,1.E0,0.E0));
#248=DIRECTION('',(1.E0,0.E0,0.E0));
#249=AXIS2_PLACEMENT_3D('',#246,#247,#248);
#250=PLANE('',#249);
#252=ORIENTED_EDGE('',*,*,#251,.F.);
#254=ORIENTED_EDGE('',*,*,#253,.F.);
#255=EDGE_LOOP('',(#252,#254));
#256=FACE_OUTER_BOUND('',#255,.F.);
#257=ADVANCED_FACE('',(#256),#250,.T.);
#258=CARTESIAN_POINT('',(0.E0,1.37E1,0.E0));
#259=DIRECTION('',(0.E0,-1.E0,0.E0));
#260=DIRECTION('',(-1.E0,0.E0,0.E0));
#261=AXIS2_PLACEMENT_3D('',#258,#259,#260);
#262=CONICAL_SURFACE('',#261,3.7E0,4.5E1);
#263=ORIENTED_EDGE('',*,*,#251,.T.);
#265=ORIENTED_EDGE('',*,*,#264,.T.);
#267=ORIENTED_EDGE('',*,*,#266,.F.);
#269=ORIENTED_EDGE('',*,*,#268,.F.);
#270=EDGE_LOOP('',(#263,#265,#267,#269));
#271=FACE_OUTER_BOUND('',#270,.F.);
#272=ADVANCED_FACE('',(#271),#262,.T.);
#273=CARTESIAN_POINT('',(0.E0,1.37E1,0.E0));
#274=DIRECTION('',(0.E0,-1.E0,0.E0));
#275=DIRECTION('',(-1.E0,0.E0,0.E0));
#276=AXIS2_PLACEMENT_3D('',#273,#274,#275);
#277=CONICAL_SURFACE('',#276,3.7E0,4.5E1);
#278=ORIENTED_EDGE('',*,*,#253,.T.);
#279=ORIENTED_EDGE('',*,*,#268,.T.);
#281=ORIENTED_EDGE('',*,*,#280,.F.);
#282=ORIENTED_EDGE('',*,*,#264,.F.);
#283=EDGE_LOOP('',(#278,#279,#281,#282));
#284=FACE_OUTER_BOUND('',#283,.F.);
#285=ADVANCED_FACE('',(#284),#277,.T.);
#286=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#287=DIRECTION('',(0.E0,1.E0,0.E0));
#288=DIRECTION('',(1.E0,0.E0,0.E0));
#289=AXIS2_PLACEMENT_3D('',#286,#287,#288);
#290=CYLINDRICAL_SURFACE('',#289,4.E0);
#292=ORIENTED_EDGE('',*,*,#291,.F.);
#294=ORIENTED_EDGE('',*,*,#293,.T.);
#295=ORIENTED_EDGE('',*,*,#280,.T.);
#297=ORIENTED_EDGE('',*,*,#296,.F.);
#298=EDGE_LOOP('',(#292,#294,#295,#297));
#299=FACE_OUTER_BOUND('',#298,.F.);
#300=ADVANCED_FACE('',(#299),#290,.T.);
#301=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#302=DIRECTION('',(0.E0,-1.E0,0.E0));
#303=DIRECTION('',(1.E0,0.E0,0.E0));
#304=AXIS2_PLACEMENT_3D('',#301,#302,#303);
#305=PLANE('',#304);
#307=ORIENTED_EDGE('',*,*,#306,.T.);
#309=ORIENTED_EDGE('',*,*,#308,.T.);
#310=EDGE_LOOP('',(#307,#309));
#311=FACE_OUTER_BOUND('',#310,.F.);
#313=ORIENTED_EDGE('',*,*,#312,.T.);
#314=ORIENTED_EDGE('',*,*,#291,.T.);
#315=EDGE_LOOP('',(#313,#314));
#316=FACE_BOUND('',#315,.F.);
#317=ADVANCED_FACE('',(#311,#316),#305,.F.);
#318=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#319=DIRECTION('',(0.E0,-1.E0,0.E0));
#320=DIRECTION('',(1.E0,0.E0,0.E0));
#321=AXIS2_PLACEMENT_3D('',#318,#319,#320);
#322=CYLINDRICAL_SURFACE('',#321,7.E0);
#324=ORIENTED_EDGE('',*,*,#323,.T.);
#326=ORIENTED_EDGE('',*,*,#325,.F.);
#327=ORIENTED_EDGE('',*,*,#306,.F.);
#329=ORIENTED_EDGE('',*,*,#328,.T.);
#331=ORIENTED_EDGE('',*,*,#330,.T.);
#332=EDGE_LOOP('',(#324,#326,#327,#329,#331));
#333=FACE_OUTER_BOUND('',#332,.F.);
#334=ADVANCED_FACE('',(#333),#322,.T.);
#335=CARTESIAN_POINT('',(0.E0,2.763675213675E0,0.E0));
#336=DIRECTION('',(0.E0,-1.E0,0.E0));
#337=DIRECTION('',(0.E0,0.E0,1.E0));
#338=AXIS2_PLACEMENT_3D('',#335,#336,#337);
#339=SPHERICAL_SURFACE('',#338,7.723443267116E0);
#341=ORIENTED_EDGE('',*,*,#340,.T.);
#343=ORIENTED_EDGE('',*,*,#342,.T.);
#345=ORIENTED_EDGE('',*,*,#344,.T.);
#347=ORIENTED_EDGE('',*,*,#346,.T.);
#349=ORIENTED_EDGE('',*,*,#348,.F.);
#350=ORIENTED_EDGE('',*,*,#323,.F.);
#352=ORIENTED_EDGE('',*,*,#351,.F.);
#353=EDGE_LOOP('',(#341,#343,#345,#347,#349,#350,#352));
#354=FACE_OUTER_BOUND('',#353,.F.);
#355=ADVANCED_FACE('',(#354),#339,.T.);
#356=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#357=DIRECTION('',(0.E0,-1.E0,0.E0));
#358=DIRECTION('',(1.E0,0.E0,0.E0));
#359=AXIS2_PLACEMENT_3D('',#356,#357,#358);
#360=PLANE('',#359);
#361=ORIENTED_EDGE('',*,*,#340,.F.);
#363=ORIENTED_EDGE('',*,*,#362,.T.);
#364=EDGE_LOOP('',(#361,#363));
#365=FACE_OUTER_BOUND('',#364,.F.);
#366=ADVANCED_FACE('',(#365),#360,.T.);
#367=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#368=DIRECTION('',(0.E0,-1.E0,0.E0));
#369=DIRECTION('',(1.E0,0.E0,0.E0));
#370=AXIS2_PLACEMENT_3D('',#367,#368,#369);
#371=PLANE('',#370);
#372=ORIENTED_EDGE('',*,*,#342,.F.);
#374=ORIENTED_EDGE('',*,*,#373,.T.);
#375=EDGE_LOOP('',(#372,#374));
#376=FACE_OUTER_BOUND('',#375,.F.);
#377=ADVANCED_FACE('',(#376),#371,.T.);
#378=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#379=DIRECTION('',(0.E0,-1.E0,0.E0));
#380=DIRECTION('',(1.E0,0.E0,0.E0));
#381=AXIS2_PLACEMENT_3D('',#378,#379,#380);
#382=PLANE('',#381);
#383=ORIENTED_EDGE('',*,*,#344,.F.);
#385=ORIENTED_EDGE('',*,*,#384,.T.);
#386=EDGE_LOOP('',(#383,#385));
#387=FACE_OUTER_BOUND('',#386,.F.);
#388=ADVANCED_FACE('',(#387),#382,.T.);
#389=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#390=DIRECTION('',(0.E0,-1.E0,0.E0));
#391=DIRECTION('',(1.E0,0.E0,0.E0));
#392=AXIS2_PLACEMENT_3D('',#389,#390,#391);
#393=PLANE('',#392);
#395=ORIENTED_EDGE('',*,*,#394,.F.);
#397=ORIENTED_EDGE('',*,*,#396,.T.);
#398=EDGE_LOOP('',(#395,#397));
#399=FACE_OUTER_BOUND('',#398,.F.);
#400=ADVANCED_FACE('',(#399),#393,.T.);
#401=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#402=DIRECTION('',(0.E0,-1.E0,0.E0));
#403=DIRECTION('',(1.E0,0.E0,0.E0));
#404=AXIS2_PLACEMENT_3D('',#401,#402,#403);
#405=PLANE('',#404);
#407=ORIENTED_EDGE('',*,*,#406,.F.);
#409=ORIENTED_EDGE('',*,*,#408,.T.);
#410=EDGE_LOOP('',(#407,#409));
#411=FACE_OUTER_BOUND('',#410,.F.);
#412=ADVANCED_FACE('',(#411),#405,.T.);
#413=CARTESIAN_POINT('',(0.E0,-4.4E0,0.E0));
#414=DIRECTION('',(0.E0,-1.E0,0.E0));
#415=DIRECTION('',(1.E0,0.E0,0.E0));
#416=AXIS2_PLACEMENT_3D('',#413,#414,#415);
#417=PLANE('',#416);
#419=ORIENTED_EDGE('',*,*,#418,.F.);
#421=ORIENTED_EDGE('',*,*,#420,.T.);
#422=EDGE_LOOP('',(#419,#421));
#423=FACE_OUTER_BOUND('',#422,.F.);
#424=ADVANCED_FACE('',(#423),#417,.T.);
#425=CARTESIAN_POINT('',(0.E0,-4.4E0,2.886751345948E0));
#426=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#427=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#428=AXIS2_PLACEMENT_3D('',#425,#426,#427);
#429=PLANE('',#428);
#430=ORIENTED_EDGE('',*,*,#362,.F.);
#432=ORIENTED_EDGE('',*,*,#431,.T.);
#434=ORIENTED_EDGE('',*,*,#433,.T.);
#436=ORIENTED_EDGE('',*,*,#435,.F.);
#437=EDGE_LOOP('',(#430,#432,#434,#436));
#438=FACE_OUTER_BOUND('',#437,.F.);
#439=ADVANCED_FACE('',(#438),#429,.F.);
#440=CARTESIAN_POINT('',(2.5E0,-4.4E0,1.443375672974E0));
#441=DIRECTION('',(5.E-1,0.E0,8.660254037844E-1));
#442=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#443=AXIS2_PLACEMENT_3D('',#440,#441,#442);
#444=PLANE('',#443);
#445=ORIENTED_EDGE('',*,*,#420,.F.);
#447=ORIENTED_EDGE('',*,*,#446,.T.);
#449=ORIENTED_EDGE('',*,*,#448,.T.);
#450=ORIENTED_EDGE('',*,*,#431,.F.);
#451=EDGE_LOOP('',(#445,#447,#449,#450));
#452=FACE_OUTER_BOUND('',#451,.F.);
#453=ADVANCED_FACE('',(#452),#444,.F.);
#454=CARTESIAN_POINT('',(2.5E0,-4.4E0,-1.443375672974E0));
#455=DIRECTION('',(1.E0,0.E0,0.E0));
#456=DIRECTION('',(0.E0,0.E0,1.E0));
#457=AXIS2_PLACEMENT_3D('',#454,#455,#456);
#458=PLANE('',#457);
#459=ORIENTED_EDGE('',*,*,#408,.F.);
#461=ORIENTED_EDGE('',*,*,#460,.T.);
#463=ORIENTED_EDGE('',*,*,#462,.T.);
#464=ORIENTED_EDGE('',*,*,#446,.F.);
#465=EDGE_LOOP('',(#459,#461,#463,#464));
#466=FACE_OUTER_BOUND('',#465,.F.);
#467=ADVANCED_FACE('',(#466),#458,.F.);
#468=CARTESIAN_POINT('',(0.E0,-4.4E0,-2.886751345948E0));
#469=DIRECTION('',(5.E-1,0.E0,-8.660254037844E-1));
#470=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#471=AXIS2_PLACEMENT_3D('',#468,#469,#470);
#472=PLANE('',#471);
#473=ORIENTED_EDGE('',*,*,#396,.F.);
#475=ORIENTED_EDGE('',*,*,#474,.T.);
#477=ORIENTED_EDGE('',*,*,#476,.T.);
#478=ORIENTED_EDGE('',*,*,#460,.F.);
#479=EDGE_LOOP('',(#473,#475,#477,#478));
#480=FACE_OUTER_BOUND('',#479,.F.);
#481=ADVANCED_FACE('',(#480),#472,.F.);
#482=CARTESIAN_POINT('',(-2.5E0,-4.4E0,-1.443375672974E0));
#483=DIRECTION('',(-5.E-1,0.E0,-8.660254037844E-1));
#484=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#485=AXIS2_PLACEMENT_3D('',#482,#483,#484);
#486=PLANE('',#485);
#487=ORIENTED_EDGE('',*,*,#384,.F.);
#489=ORIENTED_EDGE('',*,*,#488,.T.);
#491=ORIENTED_EDGE('',*,*,#490,.T.);
#492=ORIENTED_EDGE('',*,*,#474,.F.);
#493=EDGE_LOOP('',(#487,#489,#491,#492));
#494=FACE_OUTER_BOUND('',#493,.F.);
#495=ADVANCED_FACE('',(#494),#486,.F.);
#496=CARTESIAN_POINT('',(-2.5E0,-4.4E0,1.443375672974E0));
#497=DIRECTION('',(-1.E0,0.E0,0.E0));
#498=DIRECTION('',(0.E0,0.E0,-1.E0));
#499=AXIS2_PLACEMENT_3D('',#496,#497,#498);
#500=PLANE('',#499);
#501=ORIENTED_EDGE('',*,*,#373,.F.);
#502=ORIENTED_EDGE('',*,*,#435,.T.);
#504=ORIENTED_EDGE('',*,*,#503,.T.);
#505=ORIENTED_EDGE('',*,*,#488,.F.);
#506=EDGE_LOOP('',(#501,#502,#504,#505));
#507=FACE_OUTER_BOUND('',#506,.F.);
#508=ADVANCED_FACE('',(#507),#500,.F.);
#509=CARTESIAN_POINT('',(0.E0,-1.8E0,0.E0));
#510=DIRECTION('',(0.E0,-1.E0,0.E0));
#511=DIRECTION('',(0.E0,0.E0,-1.E0));
#512=AXIS2_PLACEMENT_3D('',#509,#510,#511);
#513=PLANE('',#512);
#514=ORIENTED_EDGE('',*,*,#462,.F.);
#515=ORIENTED_EDGE('',*,*,#476,.F.);
#516=ORIENTED_EDGE('',*,*,#490,.F.);
#517=ORIENTED_EDGE('',*,*,#503,.F.);
#518=ORIENTED_EDGE('',*,*,#433,.F.);
#519=ORIENTED_EDGE('',*,*,#448,.F.);
#520=EDGE_LOOP('',(#514,#515,#516,#517,#518,#519));
#521=FACE_OUTER_BOUND('',#520,.F.);
#522=ADVANCED_FACE('',(#521),#513,.T.);
#523=CARTESIAN_POINT('',(0.E0,2.763675213675E0,0.E0));
#524=DIRECTION('',(0.E0,-1.E0,0.E0));
#525=DIRECTION('',(0.E0,0.E0,1.E0));
#526=AXIS2_PLACEMENT_3D('',#523,#524,#525);
#527=SPHERICAL_SURFACE('',#526,7.723443267116E0);
#528=ORIENTED_EDGE('',*,*,#394,.T.);
#529=ORIENTED_EDGE('',*,*,#406,.T.);
#530=ORIENTED_EDGE('',*,*,#418,.T.);
#531=ORIENTED_EDGE('',*,*,#351,.T.);
#532=ORIENTED_EDGE('',*,*,#330,.F.);
#534=ORIENTED_EDGE('',*,*,#533,.F.);
#535=ORIENTED_EDGE('',*,*,#346,.F.);
#536=EDGE_LOOP('',(#528,#529,#530,#531,#532,#534,#535));
#537=FACE_OUTER_BOUND('',#536,.F.);
#538=ADVANCED_FACE('',(#537),#527,.T.);
#539=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#540=DIRECTION('',(0.E0,-1.E0,0.E0));
#541=DIRECTION('',(1.E0,0.E0,0.E0));
#542=AXIS2_PLACEMENT_3D('',#539,#540,#541);
#543=CYLINDRICAL_SURFACE('',#542,7.E0);
#544=ORIENTED_EDGE('',*,*,#348,.T.);
#545=ORIENTED_EDGE('',*,*,#533,.T.);
#546=ORIENTED_EDGE('',*,*,#328,.F.);
#547=ORIENTED_EDGE('',*,*,#308,.F.);
#548=ORIENTED_EDGE('',*,*,#325,.T.);
#549=EDGE_LOOP('',(#544,#545,#546,#547,#548));
#550=FACE_OUTER_BOUND('',#549,.F.);
#551=ADVANCED_FACE('',(#550),#543,.T.);
#552=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#553=DIRECTION('',(0.E0,1.E0,0.E0));
#554=DIRECTION('',(1.E0,0.E0,0.E0));
#555=AXIS2_PLACEMENT_3D('',#552,#553,#554);
#556=CYLINDRICAL_SURFACE('',#555,4.E0);
#557=ORIENTED_EDGE('',*,*,#312,.F.);
#558=ORIENTED_EDGE('',*,*,#296,.T.);
#559=ORIENTED_EDGE('',*,*,#266,.T.);
#560=ORIENTED_EDGE('',*,*,#293,.F.);
#561=EDGE_LOOP('',(#557,#558,#559,#560));
#562=FACE_OUTER_BOUND('',#561,.F.);
#563=ADVANCED_FACE('',(#562),#556,.T.);
#564=CLOSED_SHELL('',(#257,#272,#285,#300,#317,#334,#355,#366,#377,#388,#400,
#412,#424,#439,#453,#467,#481,#495,#508,#522,#538,#551,#563));
#565=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#566=DIRECTION('',(0.E0,1.E0,0.E0));
#567=DIRECTION('',(-1.E0,0.E0,0.E0));
#568=AXIS2_PLACEMENT_3D('',#565,#566,#567);
#570=DIRECTION('',(0.E0,-1.E0,0.E0));
#571=VECTOR('',#570,1.4E1);
#572=CARTESIAN_POINT('',(3.4E0,1.4E1,0.E0));
#573=LINE('',#572,#571);
#574=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#575=DIRECTION('',(0.E0,-1.E0,0.E0));
#576=DIRECTION('',(1.E0,0.E0,0.E0));
#577=AXIS2_PLACEMENT_3D('',#574,#575,#576);
#579=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#580=DIRECTION('',(0.E0,1.E0,0.E0));
#581=DIRECTION('',(1.E0,0.E0,0.E0));
#582=AXIS2_PLACEMENT_3D('',#579,#580,#581);
#584=DIRECTION('',(0.E0,-1.E0,0.E0));
#585=VECTOR('',#584,1.4E1);
#586=CARTESIAN_POINT('',(-3.4E0,1.4E1,0.E0));
#587=LINE('',#586,#585);
#588=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#589=DIRECTION('',(0.E0,-1.E0,0.E0));
#590=DIRECTION('',(-1.E0,0.E0,0.E0));
#591=AXIS2_PLACEMENT_3D('',#588,#589,#590);
#593=CARTESIAN_POINT('',(3.4E0,1.4E1,0.E0));
#594=CARTESIAN_POINT('',(-3.4E0,1.4E1,0.E0));
#595=VERTEX_POINT('',#593);
#596=VERTEX_POINT('',#594);
#597=CARTESIAN_POINT('',(3.4E0,0.E0,0.E0));
#598=CARTESIAN_POINT('',(-3.4E0,0.E0,0.E0));
#599=VERTEX_POINT('',#597);
#600=VERTEX_POINT('',#598);
#601=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#602=DIRECTION('',(0.E0,-1.E0,0.E0));
#603=DIRECTION('',(1.E0,0.E0,0.E0));
#604=AXIS2_PLACEMENT_3D('',#601,#602,#603);
#605=CYLINDRICAL_SURFACE('',#604,3.4E0);
#607=ORIENTED_EDGE('',*,*,#606,.T.);
#609=ORIENTED_EDGE('',*,*,#608,.T.);
#611=ORIENTED_EDGE('',*,*,#610,.T.);
#613=ORIENTED_EDGE('',*,*,#612,.F.);
#614=EDGE_LOOP('',(#607,#609,#611,#613));
#615=FACE_OUTER_BOUND('',#614,.F.);
#616=ADVANCED_FACE('',(#615),#605,.T.);
#617=CARTESIAN_POINT('',(0.E0,1.4E1,0.E0));
#618=DIRECTION('',(0.E0,-1.E0,0.E0));
#619=DIRECTION('',(1.E0,0.E0,0.E0));
#620=AXIS2_PLACEMENT_3D('',#617,#618,#619);
#621=CYLINDRICAL_SURFACE('',#620,3.4E0);
#623=ORIENTED_EDGE('',*,*,#622,.T.);
#624=ORIENTED_EDGE('',*,*,#612,.T.);
#626=ORIENTED_EDGE('',*,*,#625,.T.);
#627=ORIENTED_EDGE('',*,*,#608,.F.);
#628=EDGE_LOOP('',(#623,#624,#626,#627));
#629=FACE_OUTER_BOUND('',#628,.F.);
#630=ADVANCED_FACE('',(#629),#621,.T.);
#631=OPEN_SHELL('',(#616,#630));
#632=MANIFOLD_SOLID_BREP('',#564);
#633=SHELL_BASED_SURFACE_MODEL('',(#631));
#634=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#635=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#636=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#637=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#636);
#638=(CONVERSION_BASED_UNIT('DEGREE',#637)NAMED_UNIT(#635)PLANE_ANGLE_UNIT());
#639=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#640=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.703278804494E-3),#634,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#641=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#640))GLOBAL_UNIT_ASSIGNED_CONTEXT((#634,#638,#639))REPRESENTATION_CONTEXT
('ID1','3'));
#642=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#643=DIRECTION('',(0.E0,0.E0,1.E0));
#644=DIRECTION('',(1.E0,0.E0,0.E0));
#647=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#648=DIRECTION('',(0.E0,0.E0,1.E0));
#649=DIRECTION('',(1.E0,0.E0,0.E0));
#652=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#653=DIRECTION('',(0.E0,0.E0,1.E0));
#654=DIRECTION('',(1.E0,0.E0,0.E0));
#657=SHAPE_REPRESENTATION_RELATIONSHIP('','',#656,#646);
#658=SHAPE_REPRESENTATION_RELATIONSHIP('','',#656,#651);
#659=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#660=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#659);
#661=DESIGN_CONTEXT('',#659,'design');
#662=MECHANICAL_CONTEXT('',#659,'mechanical');
#663=PRODUCT('11140_SPOJNI_SET_STRANSKI_A','11140_SPOJNI_SET_STRANSKI_A',
'NOT SPECIFIED',(#662));
#664=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#663,
.MADE.);
#673=CARTESIAN_POINT('',(9.467944362400E1,-7.738519948035E0,1.313432597338E1));
#674=DIRECTION('',(0.E0,0.E0,1.E0));
#675=DIRECTION('',(1.E0,0.E0,0.E0));
#676=AXIS2_PLACEMENT_3D('',#673,#674,#675);
#677=ITEM_DEFINED_TRANSFORMATION('','',#655,#676);
#678=(REPRESENTATION_RELATIONSHIP('','',#656,#670)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#677)SHAPE_REPRESENTATION_RELATIONSHIP());
#679=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#678,#672);
#680=DIRECTION('',(0.E0,0.E0,1.E0));
#681=VECTOR('',#680,1.6E1);
#682=CARTESIAN_POINT('',(-8.E0,0.E0,-8.E0));
#683=LINE('',#682,#681);
#684=DIRECTION('',(1.E0,0.E0,0.E0));
#685=VECTOR('',#684,1.6E1);
#686=CARTESIAN_POINT('',(-8.E0,0.E0,8.E0));
#687=LINE('',#686,#685);
#688=DIRECTION('',(0.E0,0.E0,-1.E0));
#689=VECTOR('',#688,1.6E1);
#690=CARTESIAN_POINT('',(8.E0,0.E0,8.E0));
#691=LINE('',#690,#689);
#692=DIRECTION('',(-1.E0,0.E0,0.E0));
#693=VECTOR('',#692,1.6E1);
#694=CARTESIAN_POINT('',(8.E0,0.E0,-8.E0));
#695=LINE('',#694,#693);
#696=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#697=DIRECTION('',(0.E0,1.E0,0.E0));
#698=DIRECTION('',(1.E0,0.E0,0.E0));
#699=AXIS2_PLACEMENT_3D('',#696,#697,#698);
#701=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#702=DIRECTION('',(0.E0,1.E0,0.E0));
#703=DIRECTION('',(-1.E0,0.E0,0.E0));
#704=AXIS2_PLACEMENT_3D('',#701,#702,#703);
#706=DIRECTION('',(0.E0,1.E0,0.E0));
#707=VECTOR('',#706,1.3E0);
#708=CARTESIAN_POINT('',(-8.E0,0.E0,-8.E0));
#709=LINE('',#708,#707);
#710=DIRECTION('',(0.E0,1.E0,0.E0));
#711=VECTOR('',#710,1.3E0);
#712=CARTESIAN_POINT('',(8.E0,0.E0,-8.E0));
#713=LINE('',#712,#711);
#714=DIRECTION('',(0.E0,1.E0,0.E0));
#715=VECTOR('',#714,1.3E0);
#716=CARTESIAN_POINT('',(8.E0,0.E0,8.E0));
#717=LINE('',#716,#715);
#718=DIRECTION('',(0.E0,1.E0,0.E0));
#719=VECTOR('',#718,1.3E0);
#720=CARTESIAN_POINT('',(-8.E0,0.E0,8.E0));
#721=LINE('',#720,#719);
#722=DIRECTION('',(0.E0,0.E0,1.E0));
#723=VECTOR('',#722,1.6E1);
#724=CARTESIAN_POINT('',(-8.E0,1.3E0,-8.E0));
#725=LINE('',#724,#723);
#726=DIRECTION('',(-1.E0,0.E0,0.E0));
#727=VECTOR('',#726,1.6E1);
#728=CARTESIAN_POINT('',(8.E0,1.3E0,-8.E0));
#729=LINE('',#728,#727);
#730=DIRECTION('',(0.E0,0.E0,-1.E0));
#731=VECTOR('',#730,1.6E1);
#732=CARTESIAN_POINT('',(8.E0,1.3E0,8.E0));
#733=LINE('',#732,#731);
#734=DIRECTION('',(1.E0,0.E0,0.E0));
#735=VECTOR('',#734,1.6E1);
#736=CARTESIAN_POINT('',(-8.E0,1.3E0,8.E0));
#737=LINE('',#736,#735);
#738=CARTESIAN_POINT('',(0.E0,1.3E0,0.E0));
#739=DIRECTION('',(0.E0,1.E0,0.E0));
#740=DIRECTION('',(1.E0,0.E0,0.E0));
#741=AXIS2_PLACEMENT_3D('',#738,#739,#740);
#743=CARTESIAN_POINT('',(0.E0,1.3E0,0.E0));
#744=DIRECTION('',(0.E0,1.E0,0.E0));
#745=DIRECTION('',(-1.E0,0.E0,0.E0));
#746=AXIS2_PLACEMENT_3D('',#743,#744,#745);
#748=DIRECTION('',(0.E0,-1.E0,0.E0));
#749=VECTOR('',#748,1.3E0);
#750=CARTESIAN_POINT('',(4.25E0,1.3E0,0.E0));
#751=LINE('',#750,#749);
#752=DIRECTION('',(0.E0,-1.E0,0.E0));
#753=VECTOR('',#752,1.3E0);
#754=CARTESIAN_POINT('',(-4.25E0,1.3E0,0.E0));
#755=LINE('',#754,#753);
#756=CARTESIAN_POINT('',(-8.E0,0.E0,-8.E0));
#757=CARTESIAN_POINT('',(-8.E0,0.E0,8.E0));
#758=VERTEX_POINT('',#756);
#759=VERTEX_POINT('',#757);
#760=CARTESIAN_POINT('',(8.E0,0.E0,8.E0));
#761=VERTEX_POINT('',#760);
#762=CARTESIAN_POINT('',(8.E0,0.E0,-8.E0));
#763=VERTEX_POINT('',#762);
#764=CARTESIAN_POINT('',(-8.E0,1.3E0,-8.E0));
#765=CARTESIAN_POINT('',(-8.E0,1.3E0,8.E0));
#766=VERTEX_POINT('',#764);
#767=VERTEX_POINT('',#765);
#768=CARTESIAN_POINT('',(8.E0,1.3E0,8.E0));
#769=VERTEX_POINT('',#768);
#770=CARTESIAN_POINT('',(8.E0,1.3E0,-8.E0));
#771=VERTEX_POINT('',#770);
#772=CARTESIAN_POINT('',(4.25E0,0.E0,0.E0));
#773=CARTESIAN_POINT('',(-4.25E0,0.E0,0.E0));
#774=VERTEX_POINT('',#772);
#775=VERTEX_POINT('',#773);
#776=CARTESIAN_POINT('',(4.25E0,1.3E0,0.E0));
#777=CARTESIAN_POINT('',(-4.25E0,1.3E0,0.E0));
#778=VERTEX_POINT('',#776);
#779=VERTEX_POINT('',#777);
#780=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#781=DIRECTION('',(0.E0,1.E0,0.E0));
#782=DIRECTION('',(1.E0,0.E0,0.E0));
#783=AXIS2_PLACEMENT_3D('',#780,#781,#782);
#784=PLANE('',#783);
#786=ORIENTED_EDGE('',*,*,#785,.T.);
#788=ORIENTED_EDGE('',*,*,#787,.T.);
#790=ORIENTED_EDGE('',*,*,#789,.T.);
#792=ORIENTED_EDGE('',*,*,#791,.T.);
#793=EDGE_LOOP('',(#786,#788,#790,#792));
#794=FACE_OUTER_BOUND('',#793,.F.);
#796=ORIENTED_EDGE('',*,*,#795,.F.);
#798=ORIENTED_EDGE('',*,*,#797,.F.);
#799=EDGE_LOOP('',(#796,#798));
#800=FACE_BOUND('',#799,.F.);
#801=ADVANCED_FACE('',(#794,#800),#784,.F.);
#802=CARTESIAN_POINT('',(-8.E0,0.E0,-8.E0));
#803=DIRECTION('',(-1.E0,0.E0,0.E0));
#804=DIRECTION('',(0.E0,0.E0,1.E0));
#805=AXIS2_PLACEMENT_3D('',#802,#803,#804);
#806=PLANE('',#805);
#807=ORIENTED_EDGE('',*,*,#785,.F.);
#809=ORIENTED_EDGE('',*,*,#808,.T.);
#811=ORIENTED_EDGE('',*,*,#810,.T.);
#813=ORIENTED_EDGE('',*,*,#812,.F.);
#814=EDGE_LOOP('',(#807,#809,#811,#813));
#815=FACE_OUTER_BOUND('',#814,.F.);
#816=ADVANCED_FACE('',(#815),#806,.T.);
#817=CARTESIAN_POINT('',(8.E0,0.E0,-8.E0));
#818=DIRECTION('',(0.E0,0.E0,-1.E0));
#819=DIRECTION('',(-1.E0,0.E0,0.E0));
#820=AXIS2_PLACEMENT_3D('',#817,#818,#819);
#821=PLANE('',#820);
#822=ORIENTED_EDGE('',*,*,#791,.F.);
#824=ORIENTED_EDGE('',*,*,#823,.T.);
#826=ORIENTED_EDGE('',*,*,#825,.T.);
#827=ORIENTED_EDGE('',*,*,#808,.F.);
#828=EDGE_LOOP('',(#822,#824,#826,#827));
#829=FACE_OUTER_BOUND('',#828,.F.);
#830=ADVANCED_FACE('',(#829),#821,.T.);
#831=CARTESIAN_POINT('',(8.E0,0.E0,8.E0));
#832=DIRECTION('',(1.E0,0.E0,0.E0));
#833=DIRECTION('',(0.E0,0.E0,-1.E0));
#834=AXIS2_PLACEMENT_3D('',#831,#832,#833);
#835=PLANE('',#834);
#836=ORIENTED_EDGE('',*,*,#789,.F.);
#838=ORIENTED_EDGE('',*,*,#837,.T.);
#840=ORIENTED_EDGE('',*,*,#839,.T.);
#841=ORIENTED_EDGE('',*,*,#823,.F.);
#842=EDGE_LOOP('',(#836,#838,#840,#841));
#843=FACE_OUTER_BOUND('',#842,.F.);
#844=ADVANCED_FACE('',(#843),#835,.T.);
#845=CARTESIAN_POINT('',(-8.E0,0.E0,8.E0));
#846=DIRECTION('',(0.E0,0.E0,1.E0));
#847=DIRECTION('',(1.E0,0.E0,0.E0));
#848=AXIS2_PLACEMENT_3D('',#845,#846,#847);
#849=PLANE('',#848);
#850=ORIENTED_EDGE('',*,*,#787,.F.);
#851=ORIENTED_EDGE('',*,*,#812,.T.);
#853=ORIENTED_EDGE('',*,*,#852,.T.);
#854=ORIENTED_EDGE('',*,*,#837,.F.);
#855=EDGE_LOOP('',(#850,#851,#853,#854));
#856=FACE_OUTER_BOUND('',#855,.F.);
#857=ADVANCED_FACE('',(#856),#849,.T.);
#858=CARTESIAN_POINT('',(0.E0,1.3E0,0.E0));
#859=DIRECTION('',(0.E0,1.E0,0.E0));
#860=DIRECTION('',(1.E0,0.E0,0.E0));
#861=AXIS2_PLACEMENT_3D('',#858,#859,#860);
#862=PLANE('',#861);
#863=ORIENTED_EDGE('',*,*,#810,.F.);
#864=ORIENTED_EDGE('',*,*,#825,.F.);
#865=ORIENTED_EDGE('',*,*,#839,.F.);
#866=ORIENTED_EDGE('',*,*,#852,.F.);
#867=EDGE_LOOP('',(#863,#864,#865,#866));
#868=FACE_OUTER_BOUND('',#867,.F.);
#870=ORIENTED_EDGE('',*,*,#869,.T.);
#872=ORIENTED_EDGE('',*,*,#871,.T.);
#873=EDGE_LOOP('',(#870,#872));
#874=FACE_BOUND('',#873,.F.);
#875=ADVANCED_FACE('',(#868,#874),#862,.T.);
#876=CARTESIAN_POINT('',(0.E0,1.3E0,0.E0));
#877=DIRECTION('',(0.E0,1.E0,0.E0));
#878=DIRECTION('',(1.E0,0.E0,0.E0));
#879=AXIS2_PLACEMENT_3D('',#876,#877,#878);
#880=CYLINDRICAL_SURFACE('',#879,4.25E0);
#881=ORIENTED_EDGE('',*,*,#795,.T.);
#883=ORIENTED_EDGE('',*,*,#882,.F.);
#884=ORIENTED_EDGE('',*,*,#869,.F.);
#886=ORIENTED_EDGE('',*,*,#885,.T.);
#887=EDGE_LOOP('',(#881,#883,#884,#886));
#888=FACE_OUTER_BOUND('',#887,.F.);
#889=ADVANCED_FACE('',(#888),#880,.F.);
#890=CARTESIAN_POINT('',(0.E0,1.3E0,0.E0));
#891=DIRECTION('',(0.E0,1.E0,0.E0));
#892=DIRECTION('',(1.E0,0.E0,0.E0));
#893=AXIS2_PLACEMENT_3D('',#890,#891,#892);
#894=CYLINDRICAL_SURFACE('',#893,4.25E0);
#895=ORIENTED_EDGE('',*,*,#797,.T.);
#896=ORIENTED_EDGE('',*,*,#885,.F.);
#897=ORIENTED_EDGE('',*,*,#871,.F.);
#898=ORIENTED_EDGE('',*,*,#882,.T.);
#899=EDGE_LOOP('',(#895,#896,#897,#898));
#900=FACE_OUTER_BOUND('',#899,.F.);
#901=ADVANCED_FACE('',(#900),#894,.F.);
#902=CLOSED_SHELL('',(#801,#816,#830,#844,#857,#875,#889,#901));
#903=MANIFOLD_SOLID_BREP('',#902);
#904=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#905=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#906=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#907=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#906);
#908=(CONVERSION_BASED_UNIT('DEGREE',#907)NAMED_UNIT(#905)PLANE_ANGLE_UNIT());
#909=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#910=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.488916309142E-3),#904,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#911=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#910))GLOBAL_UNIT_ASSIGNED_CONTEXT((#904,#908,#909))REPRESENTATION_CONTEXT
('ID2','3'));
#912=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#913=DIRECTION('',(0.E0,0.E0,1.E0));
#914=DIRECTION('',(1.E0,0.E0,0.E0));
#917=MECHANICAL_CONTEXT('',#659,'mechanical');
#918=PRODUCT('11140_SPOJNI_SET_STRANSKI_B','11140_SPOJNI_SET_STRANSKI_B',
'NOT SPECIFIED',(#917));
#919=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#918,
.MADE.);
#925=CARTESIAN_POINT('',(9.467944362400E1,-7.738519948035E0,1.313432597338E1));
#926=DIRECTION('',(0.E0,0.E0,1.E0));
#927=DIRECTION('',(1.E0,0.E0,0.E0));
#928=AXIS2_PLACEMENT_3D('',#925,#926,#927);
#929=ITEM_DEFINED_TRANSFORMATION('','',#915,#928);
#930=(REPRESENTATION_RELATIONSHIP('','',#916,#670)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#929)SHAPE_REPRESENTATION_RELATIONSHIP());
#931=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#930,#924);
#932=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#933=DIRECTION('',(0.E0,0.E0,-1.E0));
#934=DIRECTION('',(1.E0,0.E0,0.E0));
#935=AXIS2_PLACEMENT_3D('',#932,#933,#934);
#937=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#938=DIRECTION('',(0.E0,0.E0,-1.E0));
#939=DIRECTION('',(-1.E0,0.E0,0.E0));
#940=AXIS2_PLACEMENT_3D('',#937,#938,#939);
#942=CARTESIAN_POINT('',(0.E0,0.E0,-9.874280776723E-1));
#943=DIRECTION('',(0.E0,1.E0,0.E0));
#944=DIRECTION('',(5.887344867854E-1,0.E0,8.083264835878E-1));
#945=AXIS2_PLACEMENT_3D('',#942,#943,#944);
#947=CARTESIAN_POINT('',(0.E0,0.E0,-9.874280776723E-1));
#948=DIRECTION('',(0.E0,-1.E0,0.E0));
#949=DIRECTION('',(-5.887344867854E-1,0.E0,8.083264835878E-1));
#950=AXIS2_PLACEMENT_3D('',#947,#948,#949);
#952=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#953=DIRECTION('',(0.E0,0.E0,-1.E0));
#954=DIRECTION('',(1.E0,0.E0,0.E0));
#955=AXIS2_PLACEMENT_3D('',#952,#953,#954);
#957=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#958=DIRECTION('',(0.E0,0.E0,1.E0));
#959=DIRECTION('',(1.E0,0.E0,0.E0));
#960=AXIS2_PLACEMENT_3D('',#957,#958,#959);
#962=CARTESIAN_POINT('',(0.E0,0.E0,4.740573318976E0));
#963=DIRECTION('',(0.E0,0.E0,1.E0));
#964=DIRECTION('',(1.E0,0.E0,0.E0));
#965=AXIS2_PLACEMENT_3D('',#962,#963,#964);
#967=CARTESIAN_POINT('',(1.E1,0.E0,4.528980942125E0));
#968=CARTESIAN_POINT('',(1.E1,4.581010615119E-1,4.528980942125E0));
#969=CARTESIAN_POINT('',(1.E1,1.370362863225E0,4.517839377795E0));
#970=CARTESIAN_POINT('',(1.E1,2.728177746015E0,4.469354484013E0));
#971=CARTESIAN_POINT('',(1.E1,4.071687566437E0,4.392639363426E0));
#972=CARTESIAN_POINT('',(1.E1,5.422000938876E0,4.290157565384E0));
#973=CARTESIAN_POINT('',(1.E1,6.805795264350E0,4.162756054598E0));
#974=CARTESIAN_POINT('',(1.E1,7.797421577322E0,4.057370721078E0));
#975=CARTESIAN_POINT('',(1.E1,8.306623862918E0,4.E0));
#977=DIRECTION('',(0.E0,0.E0,1.E0));
#978=VECTOR('',#977,4.E0);
#979=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#980=LINE('',#979,#978);
#981=DIRECTION('',(0.E0,0.E0,1.E0));
#982=VECTOR('',#981,4.E0);
#983=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,0.E0));
#984=LINE('',#983,#982);
#985=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,4.E0));
#986=CARTESIAN_POINT('',(1.E1,-7.797076979145E0,4.057409546210E0));
#987=CARTESIAN_POINT('',(1.E1,-6.804870776925E0,4.162852017296E0));
#988=CARTESIAN_POINT('',(1.E1,-5.420420834385E0,4.290293399580E0));
#989=CARTESIAN_POINT('',(1.E1,-4.070010369124E0,4.392750443228E0));
#990=CARTESIAN_POINT('',(1.E1,-2.726899381781E0,4.469410542833E0));
#991=CARTESIAN_POINT('',(1.E1,-1.369661817202E0,4.517851388344E0));
#992=CARTESIAN_POINT('',(1.E1,-4.578531807460E-1,4.528980942125E0));
#993=CARTESIAN_POINT('',(1.E1,0.E0,4.528980942125E0));
#995=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
#996=DIRECTION('',(0.E0,0.E0,1.E0));
#997=DIRECTION('',(7.692307692308E-1,6.389710663783E-1,0.E0));
#998=AXIS2_PLACEMENT_3D('',#995,#996,#997);
#1000=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
#1001=DIRECTION('',(0.E0,0.E0,1.E0));
#1002=DIRECTION('',(-6.389710663783E-1,7.692307692308E-1,0.E0));
#1003=AXIS2_PLACEMENT_3D('',#1000,#1001,#1002);
#1005=CARTESIAN_POINT('',(8.306623862918E0,1.E1,4.E0));
#1006=CARTESIAN_POINT('',(7.734941502116E0,1.E1,4.064410216126E0));
#1007=CARTESIAN_POINT('',(6.629131442409E0,1.E1,4.180968792303E0));
#1008=CARTESIAN_POINT('',(5.116478356268E0,1.E1,4.316115175637E0));
#1009=CARTESIAN_POINT('',(3.649705116110E0,1.E1,4.420393401081E0));
#1010=CARTESIAN_POINT('',(2.196698181534E0,1.E1,4.492764210800E0));
#1011=CARTESIAN_POINT('',(7.338246666147E-1,1.E1,4.530556934014E0));
#1012=CARTESIAN_POINT('',(-7.357518847322E-1,1.E1,4.530532834284E0));
#1013=CARTESIAN_POINT('',(-2.198735202272E0,1.E1,4.492685902530E0));
#1014=CARTESIAN_POINT('',(-3.651409625900E0,1.E1,4.420285212032E0));
#1015=CARTESIAN_POINT('',(-5.117420086198E0,1.E1,4.316033542913E0));
#1016=CARTESIAN_POINT('',(-6.629266184332E0,1.E1,4.180952686125E0));
#1017=CARTESIAN_POINT('',(-7.734943428841E0,1.E1,4.064409999046E0));
#1018=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,4.E0));
#1020=DIRECTION('',(0.E0,0.E0,1.E0));
#1021=VECTOR('',#1020,4.E0);
#1022=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#1023=LINE('',#1022,#1021);
#1024=DIRECTION('',(0.E0,0.E0,1.E0));
#1025=VECTOR('',#1024,4.E0);
#1026=CARTESIAN_POINT('',(8.306623862918E0,1.E1,0.E0));
#1027=LINE('',#1026,#1025);
#1028=DIRECTION('',(0.E0,-1.E0,0.E0));
#1029=VECTOR('',#1028,1.661324772584E1);
#1030=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#1031=LINE('',#1030,#1029);
#1032=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1033=DIRECTION('',(0.E0,0.E0,1.E0));
#1034=DIRECTION('',(7.692307692308E-1,6.389710663783E-1,0.E0));
#1035=AXIS2_PLACEMENT_3D('',#1032,#1033,#1034);
#1037=DIRECTION('',(1.E0,0.E0,0.E0));
#1038=VECTOR('',#1037,1.661324772584E1);
#1039=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#1040=LINE('',#1039,#1038);
#1041=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1042=DIRECTION('',(0.E0,0.E0,1.E0));
#1043=DIRECTION('',(-6.389710663783E-1,7.692307692308E-1,0.E0));
#1044=AXIS2_PLACEMENT_3D('',#1041,#1042,#1043);
#1046=DIRECTION('',(0.E0,1.E0,0.E0));
#1047=VECTOR('',#1046,1.661324772584E1);
#1048=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#1049=LINE('',#1048,#1047);
#1050=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1051=DIRECTION('',(0.E0,0.E0,-1.E0));
#1052=DIRECTION('',(-6.389710663783E-1,-7.692307692308E-1,0.E0));
#1053=AXIS2_PLACEMENT_3D('',#1050,#1051,#1052);
#1055=DIRECTION('',(-1.E0,0.E0,0.E0));
#1056=VECTOR('',#1055,1.661324772584E1);
#1057=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#1058=LINE('',#1057,#1056);
#1059=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1060=DIRECTION('',(0.E0,0.E0,-1.E0));
#1061=DIRECTION('',(7.692307692308E-1,-6.389710663783E-1,0.E0));
#1062=AXIS2_PLACEMENT_3D('',#1059,#1060,#1061);
#1064=DIRECTION('',(0.E0,0.E0,-1.E0));
#1065=VECTOR('',#1064,3.5E0);
#1066=CARTESIAN_POINT('',(5.E0,0.E0,0.E0));
#1067=LINE('',#1066,#1065);
#1068=DIRECTION('',(0.E0,0.E0,-1.E0));
#1069=VECTOR('',#1068,3.5E0);
#1070=CARTESIAN_POINT('',(-5.E0,0.E0,0.E0));
#1071=LINE('',#1070,#1069);
#1072=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1073=DIRECTION('',(0.E0,0.E0,-1.E0));
#1074=DIRECTION('',(1.E0,0.E0,0.E0));
#1075=AXIS2_PLACEMENT_3D('',#1072,#1073,#1074);
#1077=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1078=DIRECTION('',(0.E0,0.E0,1.E0));
#1079=DIRECTION('',(1.E0,0.E0,0.E0));
#1080=AXIS2_PLACEMENT_3D('',#1077,#1078,#1079);
#1082=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#1083=DIRECTION('',(0.E0,0.E0,-1.E0));
#1084=DIRECTION('',(1.E0,0.E0,0.E0));
#1085=AXIS2_PLACEMENT_3D('',#1082,#1083,#1084);
#1087=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#1088=DIRECTION('',(0.E0,0.E0,1.E0));
#1089=DIRECTION('',(1.E0,0.E0,0.E0));
#1090=AXIS2_PLACEMENT_3D('',#1087,#1088,#1089);
#1092=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#1093=DIRECTION('',(0.E0,0.E0,-1.E0));
#1094=DIRECTION('',(1.E0,0.E0,0.E0));
#1095=AXIS2_PLACEMENT_3D('',#1092,#1093,#1094);
#1097=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#1098=DIRECTION('',(0.E0,0.E0,-1.E0));
#1099=DIRECTION('',(-1.E0,0.E0,0.E0));
#1100=AXIS2_PLACEMENT_3D('',#1097,#1098,#1099);
#1102=CARTESIAN_POINT('',(0.E0,0.E0,-2.65E0));
#1103=DIRECTION('',(0.E0,0.E0,-1.E0));
#1104=DIRECTION('',(1.E0,0.E0,0.E0));
#1105=AXIS2_PLACEMENT_3D('',#1102,#1103,#1104);
#1107=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
#1108=VECTOR('',#1107,1.202081528017E0);
#1109=CARTESIAN_POINT('',(-3.4E0,0.E0,-2.65E0));
#1110=LINE('',#1109,#1108);
#1111=CARTESIAN_POINT('',(0.E0,0.E0,-2.65E0));
#1112=DIRECTION('',(0.E0,0.E0,1.E0));
#1113=DIRECTION('',(1.E0,0.E0,0.E0));
#1114=AXIS2_PLACEMENT_3D('',#1111,#1112,#1113);
#1116=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
#1117=VECTOR('',#1116,1.202081528017E0);
#1118=CARTESIAN_POINT('',(3.4E0,0.E0,-2.65E0));
#1119=LINE('',#1118,#1117);
#1120=DIRECTION('',(0.E0,0.E0,-1.E0));
#1121=VECTOR('',#1120,1.015E1);
#1122=CARTESIAN_POINT('',(3.4E0,0.E0,7.5E0));
#1123=LINE('',#1122,#1121);
#1124=DIRECTION('',(0.E0,0.E0,-1.E0));
#1125=VECTOR('',#1124,1.015E1);
#1126=CARTESIAN_POINT('',(-3.4E0,0.E0,7.5E0));
#1127=LINE('',#1126,#1125);
#1128=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,4.E0));
#1129=CARTESIAN_POINT('',(-1.E1,7.797076979145E0,4.057409546210E0));
#1130=CARTESIAN_POINT('',(-1.E1,6.804870776926E0,4.162852017296E0));
#1131=CARTESIAN_POINT('',(-1.E1,5.420420834385E0,4.290293399580E0));
#1132=CARTESIAN_POINT('',(-1.E1,4.070010369124E0,4.392750443228E0));
#1133=CARTESIAN_POINT('',(-1.E1,2.726899381781E0,4.469410542833E0));
#1134=CARTESIAN_POINT('',(-1.E1,1.369661817202E0,4.517851388344E0));
#1135=CARTESIAN_POINT('',(-1.E1,4.578531807460E-1,4.528980942125E0));
#1136=CARTESIAN_POINT('',(-1.E1,0.E0,4.528980942125E0));
#1138=CARTESIAN_POINT('',(-1.E1,0.E0,4.528980942125E0));
#1139=CARTESIAN_POINT('',(-1.E1,-4.581010615119E-1,4.528980942125E0));
#1140=CARTESIAN_POINT('',(-1.E1,-1.370362863225E0,4.517839377795E0));
#1141=CARTESIAN_POINT('',(-1.E1,-2.728177746015E0,4.469354484013E0));
#1142=CARTESIAN_POINT('',(-1.E1,-4.071687566437E0,4.392639363426E0));
#1143=CARTESIAN_POINT('',(-1.E1,-5.422000938876E0,4.290157565384E0));
#1144=CARTESIAN_POINT('',(-1.E1,-6.805795264350E0,4.162756054598E0));
#1145=CARTESIAN_POINT('',(-1.E1,-7.797421577322E0,4.057370721078E0));
#1146=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,4.E0));
#1148=DIRECTION('',(0.E0,0.E0,1.E0));
#1149=VECTOR('',#1148,4.E0);
#1150=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#1151=LINE('',#1150,#1149);
#1152=DIRECTION('',(0.E0,0.E0,1.E0));
#1153=VECTOR('',#1152,4.E0);
#1154=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,0.E0));
#1155=LINE('',#1154,#1153);
#1156=DIRECTION('',(-9.848077530122E-1,0.E0,-1.736481776669E-1));
#1157=VECTOR('',#1156,1.218511934263E0);
#1158=CARTESIAN_POINT('',(-8.8E0,0.E0,4.740573318976E0));
#1159=LINE('',#1158,#1157);
#1160=CARTESIAN_POINT('',(0.E0,0.E0,4.740573318976E0));
#1161=DIRECTION('',(0.E0,0.E0,-1.E0));
#1162=DIRECTION('',(1.E0,0.E0,0.E0));
#1163=AXIS2_PLACEMENT_3D('',#1160,#1161,#1162);
#1165=DIRECTION('',(9.848077530122E-1,0.E0,-1.736481776669E-1));
#1166=VECTOR('',#1165,1.218511934263E0);
#1167=CARTESIAN_POINT('',(8.8E0,0.E0,4.740573318976E0));
#1168=LINE('',#1167,#1166);
#1169=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
#1170=DIRECTION('',(0.E0,0.E0,-1.E0));
#1171=DIRECTION('',(7.692307692308E-1,-6.389710663783E-1,0.E0));
#1172=AXIS2_PLACEMENT_3D('',#1169,#1170,#1171);
#1174=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
#1175=DIRECTION('',(0.E0,0.E0,-1.E0));
#1176=DIRECTION('',(-6.389710663783E-1,-7.692307692308E-1,0.E0));
#1177=AXIS2_PLACEMENT_3D('',#1174,#1175,#1176);
#1179=DIRECTION('',(0.E0,0.E0,1.E0));
#1180=VECTOR('',#1179,4.E0);
#1181=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,0.E0));
#1182=LINE('',#1181,#1180);
#1183=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,4.E0));
#1184=CARTESIAN_POINT('',(-7.734941502116E0,-1.E1,4.064410216126E0));
#1185=CARTESIAN_POINT('',(-6.629131442409E0,-1.E1,4.180968792303E0));
#1186=CARTESIAN_POINT('',(-5.116478356268E0,-1.E1,4.316115175637E0));
#1187=CARTESIAN_POINT('',(-3.649705116110E0,-1.E1,4.420393401081E0));
#1188=CARTESIAN_POINT('',(-2.196698181534E0,-1.E1,4.492764210800E0));
#1189=CARTESIAN_POINT('',(-7.338246666147E-1,-1.E1,4.530556934014E0));
#1190=CARTESIAN_POINT('',(7.357518847322E-1,-1.E1,4.530532834284E0));
#1191=CARTESIAN_POINT('',(2.198735202272E0,-1.E1,4.492685902530E0));
#1192=CARTESIAN_POINT('',(3.651409625900E0,-1.E1,4.420285212032E0));
#1193=CARTESIAN_POINT('',(5.117420086198E0,-1.E1,4.316033542913E0));
#1194=CARTESIAN_POINT('',(6.629266184332E0,-1.E1,4.180952686125E0));
#1195=CARTESIAN_POINT('',(7.734943428841E0,-1.E1,4.064409999046E0));
#1196=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,4.E0));
#1198=DIRECTION('',(0.E0,0.E0,1.E0));
#1199=VECTOR('',#1198,4.E0);
#1200=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#1201=LINE('',#1200,#1199);
#1202=CARTESIAN_POINT('',(5.E0,0.E0,0.E0));
#1203=CARTESIAN_POINT('',(5.E0,0.E0,-3.5E0));
#1204=VERTEX_POINT('',#1202);
#1205=VERTEX_POINT('',#1203);
#1206=CARTESIAN_POINT('',(-5.E0,0.E0,0.E0));
#1207=CARTESIAN_POINT('',(-5.E0,0.E0,-3.5E0));
#1208=VERTEX_POINT('',#1206);
#1209=VERTEX_POINT('',#1207);
#1210=VERTEX_POINT('',#967);
#1211=VERTEX_POINT('',#975);
#1212=VERTEX_POINT('',#1128);
#1213=VERTEX_POINT('',#1136);
#1214=VERTEX_POINT('',#1005);
#1215=VERTEX_POINT('',#1018);
#1216=CARTESIAN_POINT('',(1.E1,8.306623862918E0,0.E0));
#1217=VERTEX_POINT('',#1216);
#1218=CARTESIAN_POINT('',(-1.E1,8.306623862918E0,0.E0));
#1219=VERTEX_POINT('',#1218);
#1220=CARTESIAN_POINT('',(8.306623862918E0,1.E1,0.E0));
#1221=VERTEX_POINT('',#1220);
#1222=CARTESIAN_POINT('',(-8.306623862918E0,1.E1,0.E0));
#1223=VERTEX_POINT('',#1222);
#1224=CARTESIAN_POINT('',(1.E1,-8.306623862918E0,0.E0));
#1225=VERTEX_POINT('',#1224);
#1226=CARTESIAN_POINT('',(8.306623862918E0,-1.E1,0.E0));
#1227=CARTESIAN_POINT('',(-8.306623862918E0,-1.E1,0.E0));
#1228=VERTEX_POINT('',#1226);
#1229=VERTEX_POINT('',#1227);
#1230=CARTESIAN_POINT('',(-1.E1,-8.306623862918E0,0.E0));
#1231=VERTEX_POINT('',#1230);
#1232=VERTEX_POINT('',#985);
#1233=VERTEX_POINT('',#1183);
#1234=VERTEX_POINT('',#1196);
#1235=VERTEX_POINT('',#1146);
#1236=CARTESIAN_POINT('',(8.8E0,0.E0,4.740573318976E0));
#1237=VERTEX_POINT('',#1236);
#1238=CARTESIAN_POINT('',(-8.8E0,0.E0,4.740573318976E0));
#1239=VERTEX_POINT('',#1238);
#1240=CARTESIAN_POINT('',(6.181712111247E0,0.E0,7.5E0));
#1241=VERTEX_POINT('',#1240);
#1242=CARTESIAN_POINT('',(-6.181712111247E0,0.E0,7.5E0));
#1243=VERTEX_POINT('',#1242);
#1244=CARTESIAN_POINT('',(3.4E0,0.E0,-2.65E0));
#1245=CARTESIAN_POINT('',(-3.4E0,0.E0,-2.65E0));
#1246=VERTEX_POINT('',#1244);
#1247=VERTEX_POINT('',#1245);
#1248=CARTESIAN_POINT('',(4.25E0,0.E0,-3.5E0));
#1249=CARTESIAN_POINT('',(-4.25E0,0.E0,-3.5E0));
#1250=VERTEX_POINT('',#1248);
#1251=VERTEX_POINT('',#1249);
#1252=CARTESIAN_POINT('',(3.4E0,0.E0,7.5E0));
#1253=CARTESIAN_POINT('',(-3.4E0,0.E0,7.5E0));
#1254=VERTEX_POINT('',#1252);
#1255=VERTEX_POINT('',#1253);
#1256=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#1257=DIRECTION('',(0.E0,0.E0,1.E0));
#1258=DIRECTION('',(-1.E0,0.E0,0.E0));
#1259=AXIS2_PLACEMENT_3D('',#1256,#1257,#1258);
#1260=PLANE('',#1259);
#1262=ORIENTED_EDGE('',*,*,#1261,.T.);
#1264=ORIENTED_EDGE('',*,*,#1263,.F.);
#1265=EDGE_LOOP('',(#1262,#1264));
#1266=FACE_OUTER_BOUND('',#1265,.F.);
#1268=ORIENTED_EDGE('',*,*,#1267,.F.);
#1270=ORIENTED_EDGE('',*,*,#1269,.F.);
#1271=EDGE_LOOP('',(#1268,#1270));
#1272=FACE_BOUND('',#1271,.F.);
#1273=ADVANCED_FACE('',(#1266,#1272),#1260,.T.);
#1274=CARTESIAN_POINT('',(0.E0,0.E0,-9.874280776723E-1));
#1275=DIRECTION('',(0.E0,0.E0,1.E0));
#1276=DIRECTION('',(-1.E0,0.E0,0.E0));
#1277=AXIS2_PLACEMENT_3D('',#1274,#1275,#1276);
#1278=SPHERICAL_SURFACE('',#1277,1.05E1);
#1280=ORIENTED_EDGE('',*,*,#1279,.T.);
#1282=ORIENTED_EDGE('',*,*,#1281,.T.);
#1284=ORIENTED_EDGE('',*,*,#1283,.F.);
#1285=ORIENTED_EDGE('',*,*,#1261,.F.);
#1286=EDGE_LOOP('',(#1280,#1282,#1284,#1285));
#1287=FACE_OUTER_BOUND('',#1286,.F.);
#1288=ADVANCED_FACE('',(#1287),#1278,.T.);
#1289=CARTESIAN_POINT('',(0.E0,0.E0,-9.874280776723E-1));
#1290=DIRECTION('',(0.E0,0.E0,1.E0));
#1291=DIRECTION('',(-1.E0,0.E0,0.E0));
#1292=AXIS2_PLACEMENT_3D('',#1289,#1290,#1291);
#1293=SPHERICAL_SURFACE('',#1292,1.05E1);
#1294=ORIENTED_EDGE('',*,*,#1279,.F.);
#1295=ORIENTED_EDGE('',*,*,#1263,.T.);
#1296=ORIENTED_EDGE('',*,*,#1283,.T.);
#1298=ORIENTED_EDGE('',*,*,#1297,.F.);
#1299=EDGE_LOOP('',(#1294,#1295,#1296,#1298));
#1300=FACE_OUTER_BOUND('',#1299,.F.);
#1301=ADVANCED_FACE('',(#1300),#1293,.T.);
#1302=CARTESIAN_POINT('',(0.E0,0.E0,4.370286659488E0));
#1303=DIRECTION('',(0.E0,0.E0,-1.E0));
#1304=DIRECTION('',(1.E0,0.E0,0.E0));
#1305=AXIS2_PLACEMENT_3D('',#1302,#1303,#1304);
#1306=CONICAL_SURFACE('',#1305,1.09E1,8.E1);
#1308=ORIENTED_EDGE('',*,*,#1307,.F.);
#1310=ORIENTED_EDGE('',*,*,#1309,.F.);
#1311=ORIENTED_EDGE('',*,*,#1297,.T.);
#1313=ORIENTED_EDGE('',*,*,#1312,.T.);
#1315=ORIENTED_EDGE('',*,*,#1314,.F.);
#1317=ORIENTED_EDGE('',*,*,#1316,.F.);
#1319=ORIENTED_EDGE('',*,*,#1318,.F.);
#1321=ORIENTED_EDGE('',*,*,#1320,.F.);
#1322=EDGE_LOOP('',(#1308,#1310,#1311,#1313,#1315,#1317,#1319,#1321));
#1323=FACE_OUTER_BOUND('',#1322,.F.);
#1324=ADVANCED_FACE('',(#1323),#1306,.T.);
#1325=CARTESIAN_POINT('',(1.E1,1.E1,0.E0));
#1326=DIRECTION('',(-1.E0,0.E0,0.E0));
#1327=DIRECTION('',(0.E0,-1.E0,0.E0));
#1328=AXIS2_PLACEMENT_3D('',#1325,#1326,#1327);
#1329=PLANE('',#1328);
#1330=ORIENTED_EDGE('',*,*,#1307,.T.);
#1332=ORIENTED_EDGE('',*,*,#1331,.F.);
#1334=ORIENTED_EDGE('',*,*,#1333,.T.);
#1336=ORIENTED_EDGE('',*,*,#1335,.T.);
#1338=ORIENTED_EDGE('',*,*,#1337,.T.);
#1339=EDGE_LOOP('',(#1330,#1332,#1334,#1336,#1338));
#1340=FACE_OUTER_BOUND('',#1339,.F.);
#1341=ADVANCED_FACE('',(#1340),#1329,.F.);
#1342=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#1343=DIRECTION('',(0.E0,0.E0,1.E0));
#1344=DIRECTION('',(-1.E0,0.E0,0.E0));
#1345=AXIS2_PLACEMENT_3D('',#1342,#1343,#1344);
#1346=CYLINDRICAL_SURFACE('',#1345,1.3E1);
#1347=ORIENTED_EDGE('',*,*,#1331,.T.);
#1348=ORIENTED_EDGE('',*,*,#1320,.T.);
#1350=ORIENTED_EDGE('',*,*,#1349,.F.);
#1352=ORIENTED_EDGE('',*,*,#1351,.F.);
#1353=EDGE_LOOP('',(#1347,#1348,#1350,#1352));
#1354=FACE_OUTER_BOUND('',#1353,.F.);
#1355=ADVANCED_FACE('',(#1354),#1346,.T.);
#1356=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#1357=DIRECTION('',(0.E0,0.E0,1.E0));
#1358=DIRECTION('',(-1.E0,0.E0,0.E0));
#1359=AXIS2_PLACEMENT_3D('',#1356,#1357,#1358);
#1360=CYLINDRICAL_SURFACE('',#1359,1.3E1);
#1362=ORIENTED_EDGE('',*,*,#1361,.F.);
#1364=ORIENTED_EDGE('',*,*,#1363,.F.);
#1366=ORIENTED_EDGE('',*,*,#1365,.T.);
#1367=ORIENTED_EDGE('',*,*,#1316,.T.);
#1368=EDGE_LOOP('',(#1362,#1364,#1366,#1367));
#1369=FACE_OUTER_BOUND('',#1368,.F.);
#1370=ADVANCED_FACE('',(#1369),#1360,.T.);
#1371=CARTESIAN_POINT('',(-1.E1,1.E1,0.E0));
#1372=DIRECTION('',(0.E0,-1.E0,0.E0));
#1373=DIRECTION('',(1.E0,0.E0,0.E0));
#1374=AXIS2_PLACEMENT_3D('',#1371,#1372,#1373);
#1375=PLANE('',#1374);
#1376=ORIENTED_EDGE('',*,*,#1318,.T.);
#1377=ORIENTED_EDGE('',*,*,#1365,.F.);
#1379=ORIENTED_EDGE('',*,*,#1378,.T.);
#1380=ORIENTED_EDGE('',*,*,#1349,.T.);
#1381=EDGE_LOOP('',(#1376,#1377,#1379,#1380));
#1382=FACE_OUTER_BOUND('',#1381,.F.);
#1383=ADVANCED_FACE('',(#1382),#1375,.F.);
#1384=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1385=DIRECTION('',(0.E0,0.E0,1.E0));
#1386=DIRECTION('',(-1.E0,0.E0,0.E0));
#1387=AXIS2_PLACEMENT_3D('',#1384,#1385,#1386);
#1388=PLANE('',#1387);
#1389=ORIENTED_EDGE('',*,*,#1333,.F.);
#1390=ORIENTED_EDGE('',*,*,#1351,.T.);
#1391=ORIENTED_EDGE('',*,*,#1378,.F.);
#1392=ORIENTED_EDGE('',*,*,#1363,.T.);
#1394=ORIENTED_EDGE('',*,*,#1393,.F.);
#1396=ORIENTED_EDGE('',*,*,#1395,.F.);
#1398=ORIENTED_EDGE('',*,*,#1397,.F.);
#1400=ORIENTED_EDGE('',*,*,#1399,.F.);
#1401=EDGE_LOOP('',(#1389,#1390,#1391,#1392,#1394,#1396,#1398,#1400));
#1402=FACE_OUTER_BOUND('',#1401,.F.);
#1404=ORIENTED_EDGE('',*,*,#1403,.T.);
#1406=ORIENTED_EDGE('',*,*,#1405,.F.);
#1407=EDGE_LOOP('',(#1404,#1406));
#1408=FACE_BOUND('',#1407,.F.);
#1409=ADVANCED_FACE('',(#1402,#1408),#1388,.F.);
#1410=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#1411=DIRECTION('',(0.E0,0.E0,1.E0));
#1412=DIRECTION('',(-1.E0,0.E0,0.E0));
#1413=AXIS2_PLACEMENT_3D('',#1410,#1411,#1412);
#1414=CYLINDRICAL_SURFACE('',#1413,5.E0);
#1416=ORIENTED_EDGE('',*,*,#1415,.T.);
#1418=ORIENTED_EDGE('',*,*,#1417,.T.);
#1420=ORIENTED_EDGE('',*,*,#1419,.F.);
#1421=ORIENTED_EDGE('',*,*,#1403,.F.);
#1422=EDGE_LOOP('',(#1416,#1418,#1420,#1421));
#1423=FACE_OUTER_BOUND('',#1422,.F.);
#1424=ADVANCED_FACE('',(#1423),#1414,.T.);
#1425=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#1426=DIRECTION('',(0.E0,0.E0,1.E0));
#1427=DIRECTION('',(-1.E0,0.E0,0.E0));
#1428=AXIS2_PLACEMENT_3D('',#1425,#1426,#1427);
#1429=CYLINDRICAL_SURFACE('',#1428,5.E0);
#1430=ORIENTED_EDGE('',*,*,#1415,.F.);
#1431=ORIENTED_EDGE('',*,*,#1405,.T.);
#1432=ORIENTED_EDGE('',*,*,#1419,.T.);
#1434=ORIENTED_EDGE('',*,*,#1433,.F.);
#1435=EDGE_LOOP('',(#1430,#1431,#1432,#1434));
#1436=FACE_OUTER_BOUND('',#1435,.F.);
#1437=ADVANCED_FACE('',(#1436),#1429,.T.);
#1438=CARTESIAN_POINT('',(0.E0,0.E0,-3.5E0));
#1439=DIRECTION('',(0.E0,0.E0,1.E0));
#1440=DIRECTION('',(-1.E0,0.E0,0.E0));
#1441=AXIS2_PLACEMENT_3D('',#1438,#1439,#1440);
#1442=PLANE('',#1441);
#1443=ORIENTED_EDGE('',*,*,#1417,.F.);
#1444=ORIENTED_EDGE('',*,*,#1433,.T.);
#1445=EDGE_LOOP('',(#1443,#1444));
#1446=FACE_OUTER_BOUND('',#1445,.F.);
#1448=ORIENTED_EDGE('',*,*,#1447,.T.);
#1450=ORIENTED_EDGE('',*,*,#1449,.T.);
#1451=EDGE_LOOP('',(#1448,#1450));
#1452=FACE_BOUND('',#1451,.F.);
#1453=ADVANCED_FACE('',(#1446,#1452),#1442,.F.);
#1454=CARTESIAN_POINT('',(0.E0,0.E0,-3.075E0));
#1455=DIRECTION('',(0.E0,0.E0,-1.E0));
#1456=DIRECTION('',(1.E0,0.E0,0.E0));
#1457=AXIS2_PLACEMENT_3D('',#1454,#1455,#1456);
#1458=CONICAL_SURFACE('',#1457,3.825E0,4.5E1);
#1459=ORIENTED_EDGE('',*,*,#1447,.F.);
#1461=ORIENTED_EDGE('',*,*,#1460,.F.);
#1463=ORIENTED_EDGE('',*,*,#1462,.T.);
#1465=ORIENTED_EDGE('',*,*,#1464,.T.);
#1466=EDGE_LOOP('',(#1459,#1461,#1463,#1465));
#1467=FACE_OUTER_BOUND('',#1466,.F.);
#1468=ADVANCED_FACE('',(#1467),#1458,.F.);
#1469=CARTESIAN_POINT('',(0.E0,0.E0,-3.075E0));
#1470=DIRECTION('',(0.E0,0.E0,-1.E0));
#1471=DIRECTION('',(1.E0,0.E0,0.E0));
#1472=AXIS2_PLACEMENT_3D('',#1469,#1470,#1471);
#1473=CONICAL_SURFACE('',#1472,3.825E0,4.5E1);
#1474=ORIENTED_EDGE('',*,*,#1449,.F.);
#1475=ORIENTED_EDGE('',*,*,#1464,.F.);
#1477=ORIENTED_EDGE('',*,*,#1476,.F.);
#1478=ORIENTED_EDGE('',*,*,#1460,.T.);
#1479=EDGE_LOOP('',(#1474,#1475,#1477,#1478));
#1480=FACE_OUTER_BOUND('',#1479,.F.);
#1481=ADVANCED_FACE('',(#1480),#1473,.F.);
#1482=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#1483=DIRECTION('',(0.E0,0.E0,-1.E0));
#1484=DIRECTION('',(1.E0,0.E0,0.E0));
#1485=AXIS2_PLACEMENT_3D('',#1482,#1483,#1484);
#1486=CYLINDRICAL_SURFACE('',#1485,3.4E0);
#1487=ORIENTED_EDGE('',*,*,#1269,.T.);
#1489=ORIENTED_EDGE('',*,*,#1488,.T.);
#1490=ORIENTED_EDGE('',*,*,#1476,.T.);
#1492=ORIENTED_EDGE('',*,*,#1491,.F.);
#1493=EDGE_LOOP('',(#1487,#1489,#1490,#1492));
#1494=FACE_OUTER_BOUND('',#1493,.F.);
#1495=ADVANCED_FACE('',(#1494),#1486,.F.);
#1496=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#1497=DIRECTION('',(0.E0,0.E0,-1.E0));
#1498=DIRECTION('',(1.E0,0.E0,0.E0));
#1499=AXIS2_PLACEMENT_3D('',#1496,#1497,#1498);
#1500=CYLINDRICAL_SURFACE('',#1499,3.4E0);
#1501=ORIENTED_EDGE('',*,*,#1267,.T.);
#1502=ORIENTED_EDGE('',*,*,#1491,.T.);
#1503=ORIENTED_EDGE('',*,*,#1462,.F.);
#1504=ORIENTED_EDGE('',*,*,#1488,.F.);
#1505=EDGE_LOOP('',(#1501,#1502,#1503,#1504));
#1506=FACE_OUTER_BOUND('',#1505,.F.);
#1507=ADVANCED_FACE('',(#1506),#1500,.F.);
#1508=CARTESIAN_POINT('',(-1.E1,-1.E1,0.E0));
#1509=DIRECTION('',(1.E0,0.E0,0.E0));
#1510=DIRECTION('',(0.E0,1.E0,0.E0));
#1511=AXIS2_PLACEMENT_3D('',#1508,#1509,#1510);
#1512=PLANE('',#1511);
#1513=ORIENTED_EDGE('',*,*,#1314,.T.);
#1515=ORIENTED_EDGE('',*,*,#1514,.T.);
#1517=ORIENTED_EDGE('',*,*,#1516,.F.);
#1518=ORIENTED_EDGE('',*,*,#1393,.T.);
#1519=ORIENTED_EDGE('',*,*,#1361,.T.);
#1520=EDGE_LOOP('',(#1513,#1515,#1517,#1518,#1519));
#1521=FACE_OUTER_BOUND('',#1520,.F.);
#1522=ADVANCED_FACE('',(#1521),#1512,.F.);
#1523=CARTESIAN_POINT('',(0.E0,0.E0,4.370286659488E0));
#1524=DIRECTION('',(0.E0,0.E0,-1.E0));
#1525=DIRECTION('',(1.E0,0.E0,0.E0));
#1526=AXIS2_PLACEMENT_3D('',#1523,#1524,#1525);
#1527=CONICAL_SURFACE('',#1526,1.09E1,8.E1);
#1528=ORIENTED_EDGE('',*,*,#1337,.F.);
#1530=ORIENTED_EDGE('',*,*,#1529,.T.);
#1532=ORIENTED_EDGE('',*,*,#1531,.F.);
#1534=ORIENTED_EDGE('',*,*,#1533,.T.);
#1535=ORIENTED_EDGE('',*,*,#1514,.F.);
#1536=ORIENTED_EDGE('',*,*,#1312,.F.);
#1537=ORIENTED_EDGE('',*,*,#1281,.F.);
#1538=ORIENTED_EDGE('',*,*,#1309,.T.);
#1539=EDGE_LOOP('',(#1528,#1530,#1532,#1534,#1535,#1536,#1537,#1538));
#1540=FACE_OUTER_BOUND('',#1539,.F.);
#1541=ADVANCED_FACE('',(#1540),#1527,.T.);
#1542=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#1543=DIRECTION('',(0.E0,0.E0,1.E0));
#1544=DIRECTION('',(-1.E0,0.E0,0.E0));
#1545=AXIS2_PLACEMENT_3D('',#1542,#1543,#1544);
#1546=CYLINDRICAL_SURFACE('',#1545,1.3E1);
#1547=ORIENTED_EDGE('',*,*,#1335,.F.);
#1548=ORIENTED_EDGE('',*,*,#1399,.T.);
#1550=ORIENTED_EDGE('',*,*,#1549,.T.);
#1551=ORIENTED_EDGE('',*,*,#1529,.F.);
#1552=EDGE_LOOP('',(#1547,#1548,#1550,#1551));
#1553=FACE_OUTER_BOUND('',#1552,.F.);
#1554=ADVANCED_FACE('',(#1553),#1546,.T.);
#1555=CARTESIAN_POINT('',(0.E0,0.E0,-4.05E0));
#1556=DIRECTION('',(0.E0,0.E0,1.E0));
#1557=DIRECTION('',(-1.E0,0.E0,0.E0));
#1558=AXIS2_PLACEMENT_3D('',#1555,#1556,#1557);
#1559=CYLINDRICAL_SURFACE('',#1558,1.3E1);
#1561=ORIENTED_EDGE('',*,*,#1560,.F.);
#1562=ORIENTED_EDGE('',*,*,#1395,.T.);
#1563=ORIENTED_EDGE('',*,*,#1516,.T.);
#1564=ORIENTED_EDGE('',*,*,#1533,.F.);
#1565=EDGE_LOOP('',(#1561,#1562,#1563,#1564));
#1566=FACE_OUTER_BOUND('',#1565,.F.);
#1567=ADVANCED_FACE('',(#1566),#1559,.T.);
#1568=CARTESIAN_POINT('',(1.E1,-1.E1,0.E0));
#1569=DIRECTION('',(0.E0,1.E0,0.E0));
#1570=DIRECTION('',(-1.E0,0.E0,0.E0));
#1571=AXIS2_PLACEMENT_3D('',#1568,#1569,#1570);
#1572=PLANE('',#1571);
#1573=ORIENTED_EDGE('',*,*,#1560,.T.);
#1574=ORIENTED_EDGE('',*,*,#1531,.T.);
#1575=ORIENTED_EDGE('',*,*,#1549,.F.);
#1576=ORIENTED_EDGE('',*,*,#1397,.T.);
#1577=EDGE_LOOP('',(#1573,#1574,#1575,#1576));
#1578=FACE_OUTER_BOUND('',#1577,.F.);
#1579=ADVANCED_FACE('',(#1578),#1572,.F.);
#1580=CLOSED_SHELL('',(#1273,#1288,#1301,#1324,#1341,#1355,#1370,#1383,#1409,
#1424,#1437,#1453,#1468,#1481,#1495,#1507,#1522,#1541,#1554,#1567,#1579));
#1581=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#1582=DIRECTION('',(0.E0,0.E0,-1.E0));
#1583=DIRECTION('',(1.E0,0.E0,0.E0));
#1584=AXIS2_PLACEMENT_3D('',#1581,#1582,#1583);
#1586=CARTESIAN_POINT('',(0.E0,0.E0,-3.25E0));
#1587=DIRECTION('',(0.E0,0.E0,1.E0));
#1588=DIRECTION('',(-1.E0,0.E0,0.E0));
#1589=AXIS2_PLACEMENT_3D('',#1586,#1587,#1588);
#1591=CARTESIAN_POINT('',(0.E0,0.E0,7.5E0));
#1592=DIRECTION('',(0.E0,0.E0,-1.E0));
#1593=DIRECTION('',(-1.E0,0.E0,0.E0));
#1594=AXIS2_PLACEMENT_3D('',#1591,#1592,#1593);
#1596=DIRECTION('',(0.E0,0.E0,1.E0));
#1597=VECTOR('',#1596,1.075E1);
#1598=CARTESIAN_POINT('',(4.E0,0.E0,-3.25E0));
#1599=LINE('',#1598,#1597);
#1600=CARTESIAN_POINT('',(0.E0,0.E0,-3.25E0));
#1601=DIRECTION('',(0.E0,0.E0,1.E0));
#1602=DIRECTION('',(1.E0,0.E0,0.E0));
#1603=AXIS2_PLACEMENT_3D('',#1600,#1601,#1602);
#1605=DIRECTION('',(0.E0,0.E0,1.E0));
#1606=VECTOR('',#1605,1.075E1);
#1607=CARTESIAN_POINT('',(-4.E0,0.E0,-3.25E0));
#1608=LINE('',#1607,#1606);
#1609=CARTESIAN_POINT('',(4.E0,0.E0,7.5E0));
#1610=CARTESIAN_POINT('',(-4.E0,0.E0,7.5E0));
#1611=VERTEX_POINT('',#1609);
#1612=VERTEX_POINT('',#1610);
#1613=CARTESIAN_POINT('',(4.E0,0.E0,-3.25E0));
#1614=CARTESIAN_POINT('',(-4.E0,0.E0,-3.25E0));
#1615=VERTEX_POINT('',#1613);
#1616=VERTEX_POINT('',#1614);
#1617=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#1618=DIRECTION('',(0.E0,0.E0,-1.E0));
#1619=DIRECTION('',(1.E0,0.E0,0.E0));
#1620=AXIS2_PLACEMENT_3D('',#1617,#1618,#1619);
#1621=CYLINDRICAL_SURFACE('',#1620,4.E0);
#1623=ORIENTED_EDGE('',*,*,#1622,.T.);
#1625=ORIENTED_EDGE('',*,*,#1624,.F.);
#1627=ORIENTED_EDGE('',*,*,#1626,.T.);
#1629=ORIENTED_EDGE('',*,*,#1628,.T.);
#1630=EDGE_LOOP('',(#1623,#1625,#1627,#1629));
#1631=FACE_OUTER_BOUND('',#1630,.F.);
#1632=ADVANCED_FACE('',(#1631),#1621,.F.);
#1633=CARTESIAN_POINT('',(0.E0,0.E0,9.205E0));
#1634=DIRECTION('',(0.E0,0.E0,-1.E0));
#1635=DIRECTION('',(1.E0,0.E0,0.E0));
#1636=AXIS2_PLACEMENT_3D('',#1633,#1634,#1635);
#1637=CYLINDRICAL_SURFACE('',#1636,4.E0);
#1639=ORIENTED_EDGE('',*,*,#1638,.T.);
#1640=ORIENTED_EDGE('',*,*,#1628,.F.);
#1642=ORIENTED_EDGE('',*,*,#1641,.T.);
#1643=ORIENTED_EDGE('',*,*,#1624,.T.);
#1644=EDGE_LOOP('',(#1639,#1640,#1642,#1643));
#1645=FACE_OUTER_BOUND('',#1644,.F.);
#1646=ADVANCED_FACE('',(#1645),#1637,.F.);
#1647=OPEN_SHELL('',(#1632,#1646));
#1648=MANIFOLD_SOLID_BREP('',#1580);
#1649=SHELL_BASED_SURFACE_MODEL('',(#1647));
#1650=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1651=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1652=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1653=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1652);
#1654=(CONVERSION_BASED_UNIT('DEGREE',#1653)NAMED_UNIT(#1651)PLANE_ANGLE_UNIT(
));
#1655=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1656=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.838487284174E-3),#1650,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1657=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1656))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1650,#1654,#1655))REPRESENTATION_CONTEXT(
'ID3','3'));
#1658=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1659=DIRECTION('',(0.E0,0.E0,1.E0));
#1660=DIRECTION('',(1.E0,0.E0,0.E0));
#1663=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1664=DIRECTION('',(0.E0,0.E0,1.E0));
#1665=DIRECTION('',(1.E0,0.E0,0.E0));
#1668=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1669=DIRECTION('',(0.E0,0.E0,1.E0));
#1670=DIRECTION('',(1.E0,0.E0,0.E0));
#1673=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1672,#1662);
#1674=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1672,#1667);
#1675=DESIGN_CONTEXT('',#659,'design');
#1676=MECHANICAL_CONTEXT('',#659,'mechanical');
#1677=PRODUCT('11140_SPOJNI_SET_STRANSKI_C','11140_SPOJNI_SET_STRANSKI_C',
'NOT SPECIFIED',(#1676));
#1678=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1677,.MADE.);
#1684=CARTESIAN_POINT('',(9.467944362400E1,1.261480051965E0,1.313432597338E1));
#1685=DIRECTION('',(0.E0,1.E0,0.E0));
#1686=DIRECTION('',(-1.E0,0.E0,0.E0));
#1687=AXIS2_PLACEMENT_3D('',#1684,#1685,#1686);
#1688=ITEM_DEFINED_TRANSFORMATION('','',#1671,#1687);
#1689=(REPRESENTATION_RELATIONSHIP('','',#1672,#670)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1688)SHAPE_REPRESENTATION_RELATIONSHIP());
#1690=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1689,#1683);
#1691=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1692=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1693=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1694=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1693);
#1695=(CONVERSION_BASED_UNIT('DEGREE',#1694)NAMED_UNIT(#1692)PLANE_ANGLE_UNIT(
));
#1696=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1697=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.229263408753E-3),#1691,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1698=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1697))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1691,#1695,#1696))REPRESENTATION_CONTEXT(
'ID4','3'));
#1699=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1700=DIRECTION('',(0.E0,0.E0,1.E0));
#1701=DIRECTION('',(1.E0,0.E0,0.E0));
#1703=MECHANICAL_CONTEXT('',#659,'mechanical');
#1704=PRODUCT('11140_SPOJNI_SET_STRANSKI_U8U10_ASM',
'11140_SPOJNI_SET_STRANSKI_U8U10_ASM','NOT SPECIFIED',(#1703));
#1705=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1704,.MADE.);
#1707=PRODUCT_CATEGORY('part','');
#1708=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#1704));
#1709=PRODUCT_CATEGORY_RELATIONSHIP('','',#1707,#1708);
#1710=PRODUCT_CATEGORY('part','');
#1711=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#663,#918,#1677));
#1712=PRODUCT_CATEGORY_RELATIONSHIP('','',#1710,#1711);
#1713=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#1714=SECURITY_CLASSIFICATION('','',#1713);
#1715=CC_DESIGN_SECURITY_CLASSIFICATION(#1714,(#664,#919,#1678,#1705,#671,#923,
#1682));
#1716=APPROVAL_STATUS('approved');
#1717=APPROVAL(#1716,'');
#1718=CC_DESIGN_APPROVAL(#1717,(#1714,#664,#919,#1678,#1705,#665,#920,#1679,
#1706));
#1719=CALENDAR_DATE(111,10,3);
#1720=COORDINATED_UNIVERSAL_TIME_OFFSET(1,0,.AHEAD.);
#1721=LOCAL_TIME(8,35,4.7E1,#1720);
#1722=DATE_AND_TIME(#1719,#1721);
#1723=APPROVAL_DATE_TIME(#1722,#1717);
#1724=DATE_TIME_ROLE('creation_date');
#1725=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1722,#1724,(#665,#920,#1679,#1706));
#1726=DATE_TIME_ROLE('classification_date');
#1727=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1722,#1726,(#1714));
#1728=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#1729=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#1730=PERSON_AND_ORGANIZATION(#1728,#1729);
#1731=APPROVAL_ROLE('approver');
#1732=APPROVAL_PERSON_ORGANIZATION(#1730,#1717,#1731);
#1733=PERSON_AND_ORGANIZATION_ROLE('creator');
#1734=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1730,#1733,(#664,#919,#1678,
#1705,#665,#920,#1679,#1706));
#1735=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#1736=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1730,#1735,(#664,#919,#1678,
#1705));
#1737=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#1738=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1730,#1737,(#1714));
#1739=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#1740=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1730,#1739,(#1704,#663,#918,
#1677));
#6=CIRCLE('',#5,3.4E0);
#15=CIRCLE('',#14,4.E0);
#24=CIRCLE('',#23,3.4E0);
#29=CIRCLE('',#28,4.E0);
#38=CIRCLE('',#37,7.E0);
#43=CIRCLE('',#42,7.E0);
#48=CIRCLE('',#47,4.E0);
#53=CIRCLE('',#52,4.E0);
#62=CIRCLE('',#61,7.E0);
#67=CIRCLE('',#66,7.E0);
#72=CIRCLE('',#71,2.886751345948E0);
#81=CIRCLE('',#80,2.886751345948E0);
#90=CIRCLE('',#89,2.886751345948E0);
#99=CIRCLE('',#98,2.886751345948E0);
#108=CIRCLE('',#107,2.886751345948E0);
#117=CIRCLE('',#116,2.886751345948E0);
#174=CIRCLE('',#173,7.723443267116E0);
#179=CIRCLE('',#178,7.E0);
#184=CIRCLE('',#183,7.E0);
#189=CIRCLE('',#188,7.723443267116E0);
#251=EDGE_CURVE('',#233,#232,#6,.T.);
#253=EDGE_CURVE('',#232,#233,#24,.T.);
#264=EDGE_CURVE('',#232,#236,#10,.T.);
#266=EDGE_CURVE('',#237,#236,#15,.T.);
#268=EDGE_CURVE('',#233,#237,#19,.T.);
#280=EDGE_CURVE('',#236,#237,#29,.T.);
#291=EDGE_CURVE('',#205,#204,#53,.T.);
#293=EDGE_CURVE('',#205,#236,#33,.T.);
#296=EDGE_CURVE('',#204,#237,#197,.T.);
#306=EDGE_CURVE('',#200,#201,#38,.T.);
#308=EDGE_CURVE('',#201,#200,#43,.T.);
#312=EDGE_CURVE('',#204,#205,#48,.T.);
#323=EDGE_CURVE('',#240,#241,#67,.T.);
#325=EDGE_CURVE('',#201,#241,#193,.T.);
#328=EDGE_CURVE('',#200,#243,#57,.T.);
#330=EDGE_CURVE('',#243,#240,#179,.T.);
#340=EDGE_CURVE('',#223,#225,#72,.T.);
#342=EDGE_CURVE('',#225,#227,#81,.T.);
#344=EDGE_CURVE('',#227,#229,#90,.T.);
#346=EDGE_CURVE('',#229,#245,#189,.T.);
#348=EDGE_CURVE('',#241,#245,#62,.T.);
#351=EDGE_CURVE('',#223,#240,#174,.T.);
#362=EDGE_CURVE('',#223,#225,#76,.T.);
#373=EDGE_CURVE('',#225,#227,#85,.T.);
#384=EDGE_CURVE('',#227,#229,#94,.T.);
#394=EDGE_CURVE('',#229,#219,#99,.T.);
#396=EDGE_CURVE('',#229,#219,#103,.T.);
#406=EDGE_CURVE('',#219,#221,#108,.T.);
#408=EDGE_CURVE('',#219,#221,#112,.T.);
#418=EDGE_CURVE('',#221,#223,#117,.T.);
#420=EDGE_CURVE('',#221,#223,#121,.T.);
#431=EDGE_CURVE('',#223,#211,#125,.T.);
#433=EDGE_CURVE('',#211,#213,#165,.T.);
#435=EDGE_CURVE('',#225,#213,#145,.T.);
#446=EDGE_CURVE('',#221,#209,#129,.T.);
#448=EDGE_CURVE('',#209,#211,#169,.T.);
#460=EDGE_CURVE('',#219,#208,#133,.T.);
#462=EDGE_CURVE('',#208,#209,#149,.T.);
#474=EDGE_CURVE('',#229,#217,#137,.T.);
#476=EDGE_CURVE('',#217,#208,#153,.T.);
#488=EDGE_CURVE('',#227,#215,#141,.T.);
#490=EDGE_CURVE('',#215,#217,#157,.T.);
#503=EDGE_CURVE('',#213,#215,#161,.T.);
#533=EDGE_CURVE('',#245,#243,#184,.T.);
#569=CIRCLE('',#568,3.4E0);
#578=CIRCLE('',#577,3.4E0);
#583=CIRCLE('',#582,3.4E0);
#592=CIRCLE('',#591,3.4E0);
#606=EDGE_CURVE('',#596,#595,#569,.T.);
#608=EDGE_CURVE('',#595,#599,#573,.T.);
#610=EDGE_CURVE('',#599,#600,#578,.T.);
#612=EDGE_CURVE('',#596,#600,#587,.T.);
#622=EDGE_CURVE('',#595,#596,#583,.T.);
#625=EDGE_CURVE('',#600,#599,#592,.T.);
#645=AXIS2_PLACEMENT_3D('',#642,#643,#644);
#646=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#645,#632),#641);
#650=AXIS2_PLACEMENT_3D('',#647,#648,#649);
#651=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#650,#633),#641);
#655=AXIS2_PLACEMENT_3D('',#652,#653,#654);
#656=SHAPE_REPRESENTATION('',(#655),#641);
#665=PRODUCT_DEFINITION('design','',#664,#661);
#666=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11140_SPOJNI_SET_STRANSKI_A.',#665);
#667=SHAPE_DEFINITION_REPRESENTATION(#666,#656);
#668=SHAPE_DEFINITION_REPRESENTATION(#669,#670);
#669=PRODUCT_DEFINITION_SHAPE('',
'SHAPE FOR 11140_SPOJNI_SET_STRANSKI_U8U10_ASM.',#1706);
#670=SHAPE_REPRESENTATION('',(#676,#928,#1687,#1702),#1698);
#671=NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','Next assembly relationship',
'11140_SPOJNI_SET_STRANSKI_A',#1706,#665,$);
#672=PRODUCT_DEFINITION_SHAPE('Placement #2',
'Placement of 11140_SPOJNI_SET_STRANSKI_A with respect to 11140_SPOJNI_SET_STRANSKI_U8U10_ASM',#671);
#700=CIRCLE('',#699,4.25E0);
#705=CIRCLE('',#704,4.25E0);
#742=CIRCLE('',#741,4.25E0);
#747=CIRCLE('',#746,4.25E0);
#785=EDGE_CURVE('',#758,#759,#683,.T.);
#787=EDGE_CURVE('',#759,#761,#687,.T.);
#789=EDGE_CURVE('',#761,#763,#691,.T.);
#791=EDGE_CURVE('',#763,#758,#695,.T.);
#795=EDGE_CURVE('',#774,#775,#700,.T.);
#797=EDGE_CURVE('',#775,#774,#705,.T.);
#808=EDGE_CURVE('',#758,#766,#709,.T.);
#810=EDGE_CURVE('',#766,#767,#725,.T.);
#812=EDGE_CURVE('',#759,#767,#721,.T.);
#823=EDGE_CURVE('',#763,#771,#713,.T.);
#825=EDGE_CURVE('',#771,#766,#729,.T.);
#837=EDGE_CURVE('',#761,#769,#717,.T.);
#839=EDGE_CURVE('',#769,#771,#733,.T.);
#852=EDGE_CURVE('',#767,#769,#737,.T.);
#869=EDGE_CURVE('',#778,#779,#742,.T.);
#871=EDGE_CURVE('',#779,#778,#747,.T.);
#882=EDGE_CURVE('',#779,#775,#755,.T.);
#885=EDGE_CURVE('',#778,#774,#751,.T.);
#915=AXIS2_PLACEMENT_3D('',#912,#913,#914);
#916=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#915,#903),#911);
#920=PRODUCT_DEFINITION('design','',#919,#661);
#921=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11140_SPOJNI_SET_STRANSKI_B.',#920);
#922=SHAPE_DEFINITION_REPRESENTATION(#921,#916);
#923=NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','Next assembly relationship',
'11140_SPOJNI_SET_STRANSKI_B',#1706,#920,$);
#924=PRODUCT_DEFINITION_SHAPE('Placement #3',
'Placement of 11140_SPOJNI_SET_STRANSKI_B with respect to 11140_SPOJNI_SET_STRANSKI_U8U10_ASM',#923);
#936=CIRCLE('',#935,3.4E0);
#941=CIRCLE('',#940,3.4E0);
#946=CIRCLE('',#945,1.05E1);
#951=CIRCLE('',#950,1.05E1);
#956=CIRCLE('',#955,6.181712111247E0);
#961=CIRCLE('',#960,6.181712111247E0);
#966=CIRCLE('',#965,8.8E0);
#976=B_SPLINE_CURVE_WITH_KNOTS('',3,(#967,#968,#969,#970,#971,#972,#973,#974,
#975),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#994=B_SPLINE_CURVE_WITH_KNOTS('',3,(#985,#986,#987,#988,#989,#990,#991,#992,
#993),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#999=CIRCLE('',#998,1.3E1);
#1004=CIRCLE('',#1003,1.3E1);
#1019=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1005,#1006,#1007,#1008,#1009,#1010,#1011,
#1012,#1013,#1014,#1015,#1016,#1017,#1018),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,
1,1,1,1,4),(0.E0,9.090909090909E-2,1.818181818182E-1,2.727272727273E-1,
3.636363636364E-1,4.545454545455E-1,5.454545454545E-1,6.363636363636E-1,
7.272727272727E-1,8.181818181818E-1,9.090909090909E-1,1.E0),.UNSPECIFIED.);
#1036=CIRCLE('',#1035,1.3E1);
#1045=CIRCLE('',#1044,1.3E1);
#1054=CIRCLE('',#1053,1.3E1);
#1063=CIRCLE('',#1062,1.3E1);
#1076=CIRCLE('',#1075,5.E0);
#1081=CIRCLE('',#1080,5.E0);
#1086=CIRCLE('',#1085,5.E0);
#1091=CIRCLE('',#1090,5.E0);
#1096=CIRCLE('',#1095,4.25E0);
#1101=CIRCLE('',#1100,4.25E0);
#1106=CIRCLE('',#1105,3.4E0);
#1115=CIRCLE('',#1114,3.4E0);
#1137=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1128,#1129,#1130,#1131,#1132,#1133,#1134,
#1135,#1136),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#1147=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1138,#1139,#1140,#1141,#1142,#1143,#1144,
#1145,#1146),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#1164=CIRCLE('',#1163,8.8E0);
#1173=CIRCLE('',#1172,1.3E1);
#1178=CIRCLE('',#1177,1.3E1);
#1197=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1183,#1184,#1185,#1186,#1187,#1188,#1189,
#1190,#1191,#1192,#1193,#1194,#1195,#1196),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,
1,1,1,1,4),(0.E0,9.090909090909E-2,1.818181818182E-1,2.727272727273E-1,
3.636363636364E-1,4.545454545455E-1,5.454545454545E-1,6.363636363636E-1,
7.272727272727E-1,8.181818181818E-1,9.090909090909E-1,1.E0),.UNSPECIFIED.);
#1261=EDGE_CURVE('',#1241,#1243,#956,.T.);
#1263=EDGE_CURVE('',#1241,#1243,#961,.T.);
#1267=EDGE_CURVE('',#1254,#1255,#936,.T.);
#1269=EDGE_CURVE('',#1255,#1254,#941,.T.);
#1279=EDGE_CURVE('',#1241,#1237,#946,.T.);
#1281=EDGE_CURVE('',#1237,#1239,#1164,.T.);
#1283=EDGE_CURVE('',#1243,#1239,#951,.T.);
#1297=EDGE_CURVE('',#1237,#1239,#966,.T.);
#1307=EDGE_CURVE('',#1210,#1211,#976,.T.);
#1309=EDGE_CURVE('',#1237,#1210,#1168,.T.);
#1312=EDGE_CURVE('',#1239,#1213,#1159,.T.);
#1314=EDGE_CURVE('',#1212,#1213,#1137,.T.);
#1316=EDGE_CURVE('',#1215,#1212,#1004,.T.);
#1318=EDGE_CURVE('',#1214,#1215,#1019,.T.);
#1320=EDGE_CURVE('',#1211,#1214,#999,.T.);
#1331=EDGE_CURVE('',#1217,#1211,#980,.T.);
#1333=EDGE_CURVE('',#1217,#1225,#1031,.T.);
#1335=EDGE_CURVE('',#1225,#1232,#984,.T.);
#1337=EDGE_CURVE('',#1232,#1210,#994,.T.);
#1349=EDGE_CURVE('',#1221,#1214,#1027,.T.);
#1351=EDGE_CURVE('',#1217,#1221,#1036,.T.);
#1361=EDGE_CURVE('',#1219,#1212,#1155,.T.);
#1363=EDGE_CURVE('',#1223,#1219,#1045,.T.);
#1365=EDGE_CURVE('',#1223,#1215,#1023,.T.);
#1378=EDGE_CURVE('',#1223,#1221,#1040,.T.);
#1393=EDGE_CURVE('',#1231,#1219,#1049,.T.);
#1395=EDGE_CURVE('',#1229,#1231,#1054,.T.);
#1397=EDGE_CURVE('',#1228,#1229,#1058,.T.);
#1399=EDGE_CURVE('',#1225,#1228,#1063,.T.);
#1403=EDGE_CURVE('',#1204,#1208,#1076,.T.);
#1405=EDGE_CURVE('',#1204,#1208,#1081,.T.);
#1415=EDGE_CURVE('',#1204,#1205,#1067,.T.);
#1417=EDGE_CURVE('',#1205,#1209,#1086,.T.);
#1419=EDGE_CURVE('',#1208,#1209,#1071,.T.);
#1433=EDGE_CURVE('',#1205,#1209,#1091,.T.);
#1447=EDGE_CURVE('',#1250,#1251,#1096,.T.);
#1449=EDGE_CURVE('',#1251,#1250,#1101,.T.);
#1460=EDGE_CURVE('',#1246,#1250,#1119,.T.);
#1462=EDGE_CURVE('',#1246,#1247,#1106,.T.);
#1464=EDGE_CURVE('',#1247,#1251,#1110,.T.);
#1476=EDGE_CURVE('',#1246,#1247,#1115,.T.);
#1488=EDGE_CURVE('',#1254,#1246,#1123,.T.);
#1491=EDGE_CURVE('',#1255,#1247,#1127,.T.);
#1514=EDGE_CURVE('',#1213,#1235,#1147,.T.);
#1516=EDGE_CURVE('',#1231,#1235,#1151,.T.);
#1529=EDGE_CURVE('',#1232,#1234,#1173,.T.);
#1531=EDGE_CURVE('',#1233,#1234,#1197,.T.);
#1533=EDGE_CURVE('',#1233,#1235,#1178,.T.);
#1549=EDGE_CURVE('',#1228,#1234,#1201,.T.);
#1560=EDGE_CURVE('',#1229,#1233,#1182,.T.);
#1585=CIRCLE('',#1584,4.E0);
#1590=CIRCLE('',#1589,4.E0);
#1595=CIRCLE('',#1594,4.E0);
#1604=CIRCLE('',#1603,4.E0);
#1622=EDGE_CURVE('',#1611,#1612,#1585,.T.);
#1624=EDGE_CURVE('',#1616,#1612,#1608,.T.);
#1626=EDGE_CURVE('',#1616,#1615,#1590,.T.);
#1628=EDGE_CURVE('',#1615,#1611,#1599,.T.);
#1638=EDGE_CURVE('',#1612,#1611,#1595,.T.);
#1641=EDGE_CURVE('',#1615,#1616,#1604,.T.);
#1661=AXIS2_PLACEMENT_3D('',#1658,#1659,#1660);
#1662=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1661,#1648),#1657);
#1666=AXIS2_PLACEMENT_3D('',#1663,#1664,#1665);
#1667=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#1666,#1649),#1657);
#1671=AXIS2_PLACEMENT_3D('',#1668,#1669,#1670);
#1672=SHAPE_REPRESENTATION('',(#1671),#1657);
#1679=PRODUCT_DEFINITION('design','',#1678,#1675);
#1680=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11140_SPOJNI_SET_STRANSKI_C.',
#1679);
#1681=SHAPE_DEFINITION_REPRESENTATION(#1680,#1672);
#1682=NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','Next assembly relationship',
'11140_SPOJNI_SET_STRANSKI_C',#1706,#1679,$);
#1683=PRODUCT_DEFINITION_SHAPE('Placement #4',
'Placement of 11140_SPOJNI_SET_STRANSKI_C with respect to 11140_SPOJNI_SET_STRANSKI_U8U10_ASM',#1682);
#1702=AXIS2_PLACEMENT_3D('',#1699,#1700,#1701);
#1706=PRODUCT_DEFINITION('design','',#1705,#1675);
ENDSEC;
END-ISO-10303-21;