ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('12105_TECAJ_PA_45X45_ASM','2008-09-22T',('S1'),('Work d.o.o.'),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006460',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006460','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2=DIRECTION('',(-9.612616959383E-1,0.E0,-2.756373558170E-1));
#3=VECTOR('',#2,4.057167799860E0);
#4=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#5=LINE('',#4,#3);
#6=DIRECTION('',(1.E0,0.E0,0.E0));
#7=VECTOR('',#6,3.9E0);
#8=CARTESIAN_POINT('',(0.E0,-2.4E1,3.576050075737E1));
#9=LINE('',#8,#7);
#10=DIRECTION('',(0.E0,0.E0,1.E0));
#11=VECTOR('',#10,2.864219375291E1);
#12=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#13=LINE('',#12,#11);
#14=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#15=CARTESIAN_POINT('',(4.226876949323E0,-2.4E1,7.212037461389E0));
#16=CARTESIAN_POINT('',(4.807485220433E0,-2.392390664494E1,7.378524204063E0));
#17=CARTESIAN_POINT('',(5.791049844959E0,-2.358690874506E1,7.660556821741E0));
#18=CARTESIAN_POINT('',(6.767209501572E0,-2.290215755526E1,7.940466099039E0));
#19=CARTESIAN_POINT('',(7.467410990196E0,-2.193032723898E1,8.141245645003E0));
#20=CARTESIAN_POINT('',(7.818386117790E0,-2.093524684231E1,8.241886143357E0));
#21=CARTESIAN_POINT('',(7.9E0,-2.034004990598E1,8.265288547495E0));
#22=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#24=CARTESIAN_POINT('',(7.569633861545E0,-2.159178746138E1,4.056664919788E1));
#25=CARTESIAN_POINT('',(7.458229959073E0,-2.184861291248E1,4.037471537677E1));
#26=CARTESIAN_POINT('',(7.200022921815E0,-2.230083886275E1,3.997436039686E1));
#27=CARTESIAN_POINT('',(6.744499139132E0,-2.283617825449E1,3.933864088600E1));
#28=CARTESIAN_POINT('',(6.307862052704E0,-2.320890308844E1,3.876128266104E1));
#29=CARTESIAN_POINT('',(5.866746161276E0,-2.349611496698E1,3.819482798211E1));
#30=CARTESIAN_POINT('',(5.395682335287E0,-2.372205351766E1,3.760237423257E1));
#31=CARTESIAN_POINT('',(4.901276436624E0,-2.388412487651E1,3.698923112915E1));
#32=CARTESIAN_POINT('',(4.398529131826E0,-2.397952333753E1,3.637106450490E1));
#33=CARTESIAN_POINT('',(4.065567980658E0,-2.4E1,3.596327929254E1));
#34=CARTESIAN_POINT('',(3.9E0,-2.4E1,3.576050075737E1));
#36=CARTESIAN_POINT('',(7.9E0,-2.E1,3.994817261099E1));
#37=CARTESIAN_POINT('',(7.9E0,-2.013150568976E1,4.000314655531E1));
#38=CARTESIAN_POINT('',(7.887250610136E0,-2.039862030008E1,4.011441878209E1));
#39=CARTESIAN_POINT('',(7.823256778507E0,-2.081813931101E1,4.028435286394E1));
#40=CARTESIAN_POINT('',(7.714642712348E0,-2.122664990098E1,4.044084016373E1));
#41=CARTESIAN_POINT('',(7.620947716849E0,-2.147349085108E1,4.052749255302E1));
#42=CARTESIAN_POINT('',(7.569633861545E0,-2.159178746138E1,4.056664919788E1));
#44=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,2.5E1));
#45=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,2.513369575272E1));
#46=CARTESIAN_POINT('',(7.869677877729E0,-2.049175247962E1,2.539611727485E1));
#47=CARTESIAN_POINT('',(7.873853607835E0,-2.045732006227E1,2.577429332070E1));
#48=CARTESIAN_POINT('',(7.879824278616E0,-2.040292632503E1,2.613866315601E1));
#49=CARTESIAN_POINT('',(7.886639220680E0,-2.033006452321E1,2.649087047198E1));
#50=CARTESIAN_POINT('',(7.893252676452E0,-2.023924190332E1,2.683397199915E1));
#51=CARTESIAN_POINT('',(7.898446101016E0,-2.013058372714E1,2.716969655480E1));
#52=CARTESIAN_POINT('',(7.9E0,-2.004561525289E1,2.739052339307E1));
#53=CARTESIAN_POINT('',(7.9E0,-2.E1,2.75E1));
#55=CARTESIAN_POINT('',(7.9E0,-2.E1,2.25E1));
#56=CARTESIAN_POINT('',(7.9E0,-2.003986733226E1,2.259568159743E1));
#57=CARTESIAN_POINT('',(7.898811869881E0,-2.011479661056E1,2.278841840389E1));
#58=CARTESIAN_POINT('',(7.894682103006E0,-2.021278102590E1,2.308086931668E1));
#59=CARTESIAN_POINT('',(7.889204096038E0,-2.029707727569E1,2.337858736267E1));
#60=CARTESIAN_POINT('',(7.883229089659E0,-2.036775577297E1,2.368293576689E1));
#61=CARTESIAN_POINT('',(7.877506697188E0,-2.042457425538E1,2.399539283614E1));
#62=CARTESIAN_POINT('',(7.872701198694E0,-2.046694795438E1,2.431819671106E1));
#63=CARTESIAN_POINT('',(7.869434444532E0,-2.049364696853E1,2.465196831856E1));
#64=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,2.488267296616E1));
#65=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,2.5E1));
#67=CARTESIAN_POINT('',(7.569633861545E0,-2.159178746138E1,4.056664919788E1));
#68=CARTESIAN_POINT('',(7.524797854251E0,-2.148280085209E1,4.064809835443E1));
#69=CARTESIAN_POINT('',(7.428548654835E0,-2.125975065204E1,4.080311541535E1));
#70=CARTESIAN_POINT('',(7.270709216978E0,-2.091650872888E1,4.100914196571E1));
#71=CARTESIAN_POINT('',(7.094439068320E0,-2.054870036327E1,4.119779253167E1));
#72=CARTESIAN_POINT('',(6.895499945776E0,-2.014442456560E1,4.137039947503E1));
#73=CARTESIAN_POINT('',(6.667914207061E0,-1.968806183965E1,4.152569494851E1));
#74=CARTESIAN_POINT('',(6.492454310356E0,-1.933612554173E1,4.161294829251E1));
#75=CARTESIAN_POINT('',(6.4E0,-1.914893617021E1,4.164946889081E1));
#77=CARTESIAN_POINT('',(6.4E0,0.E0,-5.649999999999E1));
#78=DIRECTION('',(1.E0,0.E0,0.E0));
#79=DIRECTION('',(0.E0,1.914893617022E-1,9.814946889081E-1));
#80=AXIS2_PLACEMENT_3D('',#77,#78,#79);
#82=DIRECTION('',(1.E0,-1.926236947725E-13,-3.774758283725E-14));
#83=VECTOR('',#82,6.4E0);
#84=CARTESIAN_POINT('',(0.E0,-1.914893617021E1,4.164946889082E1));
#85=LINE('',#84,#83);
#86=CARTESIAN_POINT('',(0.E0,1.4E1,2.5E1));
#87=DIRECTION('',(-1.E0,0.E0,0.E0));
#88=DIRECTION('',(0.E0,1.E0,0.E0));
#89=AXIS2_PLACEMENT_3D('',#86,#87,#88);
#91=CARTESIAN_POINT('',(0.E0,1.4E1,2.5E1));
#92=DIRECTION('',(-1.E0,0.E0,0.E0));
#93=DIRECTION('',(0.E0,-1.E0,0.E0));
#94=AXIS2_PLACEMENT_3D('',#91,#92,#93);
#96=CARTESIAN_POINT('',(0.E0,-1.4E1,2.5E1));
#97=DIRECTION('',(1.E0,0.E0,0.E0));
#98=DIRECTION('',(0.E0,-1.E0,0.E0));
#99=AXIS2_PLACEMENT_3D('',#96,#97,#98);
#101=CARTESIAN_POINT('',(0.E0,-1.4E1,2.5E1));
#102=DIRECTION('',(1.E0,0.E0,0.E0));
#103=DIRECTION('',(0.E0,1.E0,0.E0));
#104=AXIS2_PLACEMENT_3D('',#101,#102,#103);
#106=DIRECTION('',(0.E0,0.E0,1.E0));
#107=VECTOR('',#106,4.584747812637E0);
#108=CARTESIAN_POINT('',(0.E0,0.E0,1.415252187363E0));
#109=LINE('',#108,#107);
#110=DIRECTION('',(0.E0,1.E0,0.E0));
#111=VECTOR('',#110,1.2E1);
#112=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#113=LINE('',#112,#111);
#114=DIRECTION('',(0.E0,0.E0,1.E0));
#115=VECTOR('',#114,4.584747812637E0);
#116=CARTESIAN_POINT('',(0.E0,1.2E1,1.415252187363E0));
#117=LINE('',#116,#115);
#118=DIRECTION('',(0.E0,1.E0,0.E0));
#119=VECTOR('',#118,1.2E1);
#120=CARTESIAN_POINT('',(0.E0,1.2E1,1.415252187363E0));
#121=LINE('',#120,#119);
#122=DIRECTION('',(0.E0,0.E0,1.E0));
#123=VECTOR('',#122,3.434524863878E1);
#124=CARTESIAN_POINT('',(0.E0,2.4E1,1.415252187363E0));
#125=LINE('',#124,#123);
#126=CARTESIAN_POINT('',(0.E0,1.8E1,3.576050075737E1));
#127=DIRECTION('',(1.E0,0.E0,0.E0));
#128=DIRECTION('',(0.E0,1.E0,3.438706504730E-8));
#129=AXIS2_PLACEMENT_3D('',#126,#127,#128);
#131=CARTESIAN_POINT('',(0.E0,0.E0,-5.649999999999E1));
#132=DIRECTION('',(1.E0,0.E0,0.E0));
#133=DIRECTION('',(0.E0,1.914893617022E-1,9.814946889081E-1));
#134=AXIS2_PLACEMENT_3D('',#131,#132,#133);
#136=CARTESIAN_POINT('',(0.E0,-1.8E1,3.576050075737E1));
#137=DIRECTION('',(1.E0,0.E0,0.E0));
#138=DIRECTION('',(0.E0,-1.914893617020E-1,9.814946889082E-1));
#139=AXIS2_PLACEMENT_3D('',#136,#137,#138);
#141=DIRECTION('',(0.E0,0.E0,-1.E0));
#142=VECTOR('',#141,2.976050075737E1);
#143=CARTESIAN_POINT('',(0.E0,-2.4E1,3.576050075737E1));
#144=LINE('',#143,#142);
#145=DIRECTION('',(0.E0,1.E0,0.E0));
#146=VECTOR('',#145,1.2E1);
#147=CARTESIAN_POINT('',(0.E0,-2.4E1,6.E0));
#148=LINE('',#147,#146);
#149=DIRECTION('',(0.E0,0.E0,1.E0));
#150=VECTOR('',#149,4.584747812637E0);
#151=CARTESIAN_POINT('',(0.E0,-1.2E1,1.415252187363E0));
#152=LINE('',#151,#150);
#153=DIRECTION('',(0.E0,1.E0,0.E0));
#154=VECTOR('',#153,1.2E1);
#155=CARTESIAN_POINT('',(0.E0,-1.2E1,1.415252187363E0));
#156=LINE('',#155,#154);
#157=DIRECTION('',(0.E0,0.E0,-1.E0));
#158=VECTOR('',#157,1.E1);
#159=CARTESIAN_POINT('',(0.E0,2.05E1,3.E1));
#160=LINE('',#159,#158);
#161=DIRECTION('',(0.E0,-1.E0,0.E0));
#162=VECTOR('',#161,1.E0);
#163=CARTESIAN_POINT('',(0.E0,2.15E1,3.E1));
#164=LINE('',#163,#162);
#165=DIRECTION('',(0.E0,0.E0,1.E0));
#166=VECTOR('',#165,1.E1);
#167=CARTESIAN_POINT('',(0.E0,2.15E1,2.E1));
#168=LINE('',#167,#166);
#169=DIRECTION('',(0.E0,1.E0,0.E0));
#170=VECTOR('',#169,1.E0);
#171=CARTESIAN_POINT('',(0.E0,2.05E1,2.E1));
#172=LINE('',#171,#170);
#173=DIRECTION('',(0.E0,-1.E0,0.E0));
#174=VECTOR('',#173,1.E0);
#175=CARTESIAN_POINT('',(0.E0,-2.05E1,3.E1));
#176=LINE('',#175,#174);
#177=DIRECTION('',(0.E0,0.E0,1.E0));
#178=VECTOR('',#177,1.E1);
#179=CARTESIAN_POINT('',(0.E0,-2.05E1,2.E1));
#180=LINE('',#179,#178);
#181=DIRECTION('',(0.E0,1.E0,0.E0));
#182=VECTOR('',#181,1.E0);
#183=CARTESIAN_POINT('',(0.E0,-2.15E1,2.E1));
#184=LINE('',#183,#182);
#185=DIRECTION('',(0.E0,0.E0,-1.E0));
#186=VECTOR('',#185,1.E1);
#187=CARTESIAN_POINT('',(0.E0,-2.15E1,3.E1));
#188=LINE('',#187,#186);
#189=CARTESIAN_POINT('',(3.3E0,1.4E1,2.5E1));
#190=DIRECTION('',(-1.E0,0.E0,0.E0));
#191=DIRECTION('',(0.E0,1.E0,0.E0));
#192=AXIS2_PLACEMENT_3D('',#189,#190,#191);
#194=DIRECTION('',(-1.E0,0.E0,0.E0));
#195=VECTOR('',#194,3.3E0);
#196=CARTESIAN_POINT('',(3.3E0,1.07E1,2.5E1));
#197=LINE('',#196,#195);
#198=CARTESIAN_POINT('',(3.3E0,1.4E1,2.5E1));
#199=DIRECTION('',(1.E0,0.E0,0.E0));
#200=DIRECTION('',(0.E0,1.E0,0.E0));
#201=AXIS2_PLACEMENT_3D('',#198,#199,#200);
#203=DIRECTION('',(-1.E0,0.E0,0.E0));
#204=VECTOR('',#203,3.3E0);
#205=CARTESIAN_POINT('',(3.3E0,1.73E1,2.5E1));
#206=LINE('',#205,#204);
#207=DIRECTION('',(-7.071067811865E-1,-7.071067811865E-1,0.E0));
#208=VECTOR('',#207,4.525483399594E0);
#209=CARTESIAN_POINT('',(6.5E0,2.05E1,2.5E1));
#210=LINE('',#209,#208);
#211=DIRECTION('',(-7.071067811865E-1,7.071067811865E-1,0.E0));
#212=VECTOR('',#211,4.525483399594E0);
#213=CARTESIAN_POINT('',(6.5E0,7.5E0,2.5E1));
#214=LINE('',#213,#212);
#215=CARTESIAN_POINT('',(6.5E0,1.4E1,2.5E1));
#216=DIRECTION('',(1.E0,0.E0,0.E0));
#217=DIRECTION('',(0.E0,1.E0,0.E0));
#218=AXIS2_PLACEMENT_3D('',#215,#216,#217);
#220=CARTESIAN_POINT('',(6.5E0,1.4E1,2.5E1));
#221=DIRECTION('',(-1.E0,0.E0,0.E0));
#222=DIRECTION('',(0.E0,1.E0,0.E0));
#223=AXIS2_PLACEMENT_3D('',#220,#221,#222);
#225=DIRECTION('',(0.E0,0.E0,1.E0));
#226=VECTOR('',#225,1.265288547495E0);
#227=CARTESIAN_POINT('',(7.9E0,0.E0,7.E0));
#228=LINE('',#227,#226);
#229=DIRECTION('',(0.E0,1.E0,0.E0));
#230=VECTOR('',#229,1.2E1);
#231=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#232=LINE('',#231,#230);
#233=DIRECTION('',(0.E0,0.E0,1.E0));
#234=VECTOR('',#233,1.265288547495E0);
#235=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#236=LINE('',#235,#234);
#237=DIRECTION('',(0.E0,1.E0,0.E0));
#238=VECTOR('',#237,8.E0);
#239=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#240=LINE('',#239,#238);
#241=DIRECTION('',(0.E0,0.E0,1.E0));
#242=VECTOR('',#241,1.423471145250E1);
#243=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#244=LINE('',#243,#242);
#245=CARTESIAN_POINT('',(7.9E0,-1.4E1,2.5E1));
#246=DIRECTION('',(1.E0,0.E0,0.E0));
#247=DIRECTION('',(0.E0,-9.230769230769E-1,-3.846153846155E-1));
#248=AXIS2_PLACEMENT_3D('',#245,#246,#247);
#250=CARTESIAN_POINT('',(7.9E0,-1.4E1,2.5E1));
#251=DIRECTION('',(1.E0,0.E0,0.E0));
#252=DIRECTION('',(0.E0,1.E0,0.E0));
#253=AXIS2_PLACEMENT_3D('',#250,#251,#252);
#255=DIRECTION('',(0.E0,0.E0,1.E0));
#256=VECTOR('',#255,1.244817261099E1);
#257=CARTESIAN_POINT('',(7.9E0,-2.E1,2.75E1));
#258=LINE('',#257,#256);
#259=CARTESIAN_POINT('',(7.9E0,0.E0,-5.65E1));
#260=DIRECTION('',(1.E0,0.E0,0.E0));
#261=DIRECTION('',(0.E0,2.030456852792E-1,9.791692650862E-1));
#262=AXIS2_PLACEMENT_3D('',#259,#260,#261);
#264=DIRECTION('',(0.E0,0.E0,1.E0));
#265=VECTOR('',#264,1.244817261099E1);
#266=CARTESIAN_POINT('',(7.9E0,2.E1,2.75E1));
#267=LINE('',#266,#265);
#268=CARTESIAN_POINT('',(7.9E0,1.4E1,2.5E1));
#269=DIRECTION('',(-1.E0,0.E0,0.E0));
#270=DIRECTION('',(0.E0,-1.E0,0.E0));
#271=AXIS2_PLACEMENT_3D('',#268,#269,#270);
#273=CARTESIAN_POINT('',(7.9E0,1.4E1,2.5E1));
#274=DIRECTION('',(-1.E0,0.E0,0.E0));
#275=DIRECTION('',(0.E0,9.230769230769E-1,-3.846153846155E-1));
#276=AXIS2_PLACEMENT_3D('',#273,#274,#275);
#278=DIRECTION('',(0.E0,0.E0,1.E0));
#279=VECTOR('',#278,1.55E1);
#280=CARTESIAN_POINT('',(7.9E0,2.E1,7.E0));
#281=LINE('',#280,#279);
#282=DIRECTION('',(0.E0,1.E0,0.E0));
#283=VECTOR('',#282,8.E0);
#284=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#285=LINE('',#284,#283);
#286=DIRECTION('',(0.E0,0.E0,1.E0));
#287=VECTOR('',#286,1.265288547495E0);
#288=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#289=LINE('',#288,#287);
#290=DIRECTION('',(0.E0,1.E0,0.E0));
#291=VECTOR('',#290,1.2E1);
#292=CARTESIAN_POINT('',(7.9E0,0.E0,8.265288547495E0));
#293=LINE('',#292,#291);
#294=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#295=VECTOR('',#294,8.218365543307E0);
#296=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#297=LINE('',#296,#295);
#298=CARTESIAN_POINT('',(8.9E0,0.E0,0.E0));
#299=DIRECTION('',(0.E0,1.E0,0.E0));
#300=DIRECTION('',(1.E0,0.E0,0.E0));
#301=AXIS2_PLACEMENT_3D('',#298,#299,#300);
#303=CARTESIAN_POINT('',(8.9E0,0.E0,0.E0));
#304=DIRECTION('',(0.E0,1.E0,0.E0));
#305=DIRECTION('',(-1.E0,0.E0,0.E0));
#306=AXIS2_PLACEMENT_3D('',#303,#304,#305);
#308=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#309=VECTOR('',#308,8.218365543307E0);
#310=CARTESIAN_POINT('',(0.E0,1.2E1,6.E0));
#311=LINE('',#310,#309);
#312=CARTESIAN_POINT('',(8.9E0,1.2E1,0.E0));
#313=DIRECTION('',(0.E0,1.E0,0.E0));
#314=DIRECTION('',(1.E0,0.E0,0.E0));
#315=AXIS2_PLACEMENT_3D('',#312,#313,#314);
#317=CARTESIAN_POINT('',(8.9E0,1.2E1,0.E0));
#318=DIRECTION('',(0.E0,1.E0,0.E0));
#319=DIRECTION('',(-1.E0,0.E0,0.E0));
#320=AXIS2_PLACEMENT_3D('',#317,#318,#319);
#322=DIRECTION('',(1.E0,0.E0,0.E0));
#323=VECTOR('',#322,9.999999999999E-1);
#324=CARTESIAN_POINT('',(7.9E0,0.E0,7.E0));
#325=LINE('',#324,#323);
#326=DIRECTION('',(1.E0,0.E0,0.E0));
#327=VECTOR('',#326,9.999999999999E-1);
#328=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#329=LINE('',#328,#327);
#330=DIRECTION('',(1.E0,0.E0,0.E0));
#331=VECTOR('',#330,9.999999999999E-1);
#332=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#333=LINE('',#332,#331);
#334=CARTESIAN_POINT('',(8.9E0,0.E0,1.221245327088E-14));
#335=DIRECTION('',(0.E0,1.E0,0.E0));
#336=DIRECTION('',(0.E0,0.E0,1.E0));
#337=AXIS2_PLACEMENT_3D('',#334,#335,#336);
#339=CARTESIAN_POINT('',(8.9E0,-1.2E1,1.147768945858E-14));
#340=DIRECTION('',(0.E0,1.E0,0.E0));
#341=DIRECTION('',(0.E0,0.E0,1.E0));
#342=AXIS2_PLACEMENT_3D('',#339,#340,#341);
#344=DIRECTION('',(0.E0,1.E0,0.E0));
#345=VECTOR('',#344,1.2E1);
#346=CARTESIAN_POINT('',(8.9E0,-1.2E1,7.E0));
#347=LINE('',#346,#345);
#348=CARTESIAN_POINT('',(8.9E0,1.2E1,1.294721708317E-14));
#349=DIRECTION('',(0.E0,1.E0,0.E0));
#350=DIRECTION('',(0.E0,0.E0,1.E0));
#351=AXIS2_PLACEMENT_3D('',#348,#349,#350);
#353=DIRECTION('',(0.E0,1.E0,0.E0));
#354=VECTOR('',#353,1.2E1);
#355=CARTESIAN_POINT('',(8.9E0,1.2E1,7.E0));
#356=LINE('',#355,#354);
#357=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#358=VECTOR('',#357,5.675644347018E0);
#359=CARTESIAN_POINT('',(2.837822173509E0,0.E0,-3.5E0));
#360=LINE('',#359,#358);
#361=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#362=VECTOR('',#361,5.675644347018E0);
#363=CARTESIAN_POINT('',(2.837822173509E0,-1.2E1,-3.5E0));
#364=LINE('',#363,#362);
#365=DIRECTION('',(0.E0,1.E0,0.E0));
#366=VECTOR('',#365,1.2E1);
#367=CARTESIAN_POINT('',(2.837822173509E0,-1.2E1,-3.5E0));
#368=LINE('',#367,#366);
#369=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#370=VECTOR('',#369,5.675644347018E0);
#371=CARTESIAN_POINT('',(2.837822173509E0,1.2E1,-3.5E0));
#372=LINE('',#371,#370);
#373=DIRECTION('',(0.E0,1.E0,0.E0));
#374=VECTOR('',#373,1.2E1);
#375=CARTESIAN_POINT('',(2.837822173509E0,1.2E1,-3.5E0));
#376=LINE('',#375,#374);
#377=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#378=VECTOR('',#377,8.218365543307E0);
#379=CARTESIAN_POINT('',(0.E0,-1.2E1,6.E0));
#380=LINE('',#379,#378);
#381=CARTESIAN_POINT('',(8.9E0,-1.2E1,0.E0));
#382=DIRECTION('',(0.E0,1.E0,0.E0));
#383=DIRECTION('',(1.E0,0.E0,0.E0));
#384=AXIS2_PLACEMENT_3D('',#381,#382,#383);
#386=CARTESIAN_POINT('',(8.9E0,-1.2E1,0.E0));
#387=DIRECTION('',(0.E0,1.E0,0.E0));
#388=DIRECTION('',(-1.E0,0.E0,0.E0));
#389=AXIS2_PLACEMENT_3D('',#386,#387,#388);
#391=DIRECTION('',(0.E0,1.E0,0.E0));
#392=VECTOR('',#391,1.2E1);
#393=CARTESIAN_POINT('',(1.19E1,1.2E1,0.E0));
#394=LINE('',#393,#392);
#395=DIRECTION('',(0.E0,1.E0,0.E0));
#396=VECTOR('',#395,1.2E1);
#397=CARTESIAN_POINT('',(1.19E1,-1.2E1,0.E0));
#398=LINE('',#397,#396);
#399=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#400=VECTOR('',#399,5.675644347018E0);
#401=CARTESIAN_POINT('',(2.837822173509E0,2.4E1,-3.5E0));
#402=LINE('',#401,#400);
#403=CARTESIAN_POINT('',(8.9E0,2.4E1,1.368198089546E-14));
#404=DIRECTION('',(0.E0,1.E0,0.E0));
#405=DIRECTION('',(0.E0,0.E0,1.E0));
#406=AXIS2_PLACEMENT_3D('',#403,#404,#405);
#408=DIRECTION('',(1.E0,0.E0,0.E0));
#409=VECTOR('',#408,5.E0);
#410=CARTESIAN_POINT('',(3.9E0,2.4E1,7.E0));
#411=LINE('',#410,#409);
#412=DIRECTION('',(0.E0,0.E0,1.E0));
#413=VECTOR('',#412,2.876050075737E1);
#414=CARTESIAN_POINT('',(3.9E0,2.4E1,7.E0));
#415=LINE('',#414,#413);
#416=DIRECTION('',(1.E0,0.E0,-1.763439172464E-8));
#417=VECTOR('',#416,3.9E0);
#418=CARTESIAN_POINT('',(0.E0,2.4E1,3.576050082614E1));
#419=LINE('',#418,#417);
#420=CARTESIAN_POINT('',(8.9E0,2.4E1,0.E0));
#421=DIRECTION('',(0.E0,1.E0,0.E0));
#422=DIRECTION('',(1.E0,0.E0,0.E0));
#423=AXIS2_PLACEMENT_3D('',#420,#421,#422);
#425=CARTESIAN_POINT('',(8.9E0,2.4E1,0.E0));
#426=DIRECTION('',(0.E0,1.E0,0.E0));
#427=DIRECTION('',(-1.E0,0.E0,0.E0));
#428=AXIS2_PLACEMENT_3D('',#425,#426,#427);
#430=CARTESIAN_POINT('',(3.9E0,2.E1,7.E0));
#431=DIRECTION('',(0.E0,0.E0,1.E0));
#432=DIRECTION('',(1.E0,0.E0,0.E0));
#433=AXIS2_PLACEMENT_3D('',#430,#431,#432);
#435=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,2.5E1));
#436=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,2.488268286697E1));
#437=CARTESIAN_POINT('',(7.869434294217E0,2.049364817827E1,2.465197822809E1));
#438=CARTESIAN_POINT('',(7.872701805725E0,2.046694306566E1,2.431813489595E1));
#439=CARTESIAN_POINT('',(7.877509404524E0,2.042454994619E1,2.399522470465E1));
#440=CARTESIAN_POINT('',(7.883234429318E0,2.036769982951E1,2.368265796805E1));
#441=CARTESIAN_POINT('',(7.889210603026E0,2.029699209524E1,2.337825452557E1));
#442=CARTESIAN_POINT('',(7.894687639428E0,2.021267826189E1,2.308053841449E1));
#443=CARTESIAN_POINT('',(7.898814111753E0,2.011470645325E1,2.278817652353E1));
#444=CARTESIAN_POINT('',(7.9E0,2.003982869954E1,2.259558887890E1));
#445=CARTESIAN_POINT('',(7.9E0,2.E1,2.25E1));
#447=CARTESIAN_POINT('',(7.9E0,2.E1,2.75E1));
#448=CARTESIAN_POINT('',(7.9E0,2.004557258136E1,2.739062580472E1));
#449=CARTESIAN_POINT('',(7.898448906888E0,2.013048686065E1,2.716996132502E1));
#450=CARTESIAN_POINT('',(7.893258970230E0,2.023913929210E1,2.683432010200E1));
#451=CARTESIAN_POINT('',(7.886645776546E0,2.032998803178E1,2.649119960011E1));
#452=CARTESIAN_POINT('',(7.879828736540E0,2.040288416676E1,2.613891313821E1));
#453=CARTESIAN_POINT('',(7.873854916106E0,2.045730940474E1,2.577440429205E1));
#454=CARTESIAN_POINT('',(7.869677796545E0,2.049175314449E1,2.539612664085E1));
#455=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,2.513369147493E1));
#456=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,2.5E1));
#458=CARTESIAN_POINT('',(7.569633861545E0,2.159178746138E1,4.056664919788E1));
#459=CARTESIAN_POINT('',(7.621203486324E0,2.147290121186E1,4.052729738011E1));
#460=CARTESIAN_POINT('',(7.715039658592E0,2.122535893233E1,4.044035805973E1));
#461=CARTESIAN_POINT('',(7.823134498063E0,2.081838722932E1,4.028443720033E1));
#462=CARTESIAN_POINT('',(7.887102421703E0,2.040007248191E1,4.011501808849E1));
#463=CARTESIAN_POINT('',(7.9E0,2.013217905616E1,4.000342804584E1));
#464=CARTESIAN_POINT('',(7.9E0,2.E1,3.994817261099E1));
#466=CARTESIAN_POINT('',(3.9E0,2.4E1,3.576050075737E1));
#467=CARTESIAN_POINT('',(4.065850515487E0,2.4E1,3.596362532563E1));
#468=CARTESIAN_POINT('',(4.399291691507E0,2.397944791370E1,3.637199886646E1));
#469=CARTESIAN_POINT('',(4.902322779170E0,2.388386799108E1,3.699052116303E1));
#470=CARTESIAN_POINT('',(5.397076836879E0,2.372151814993E1,3.760411153851E1));
#471=CARTESIAN_POINT('',(5.868805211103E0,2.349502108505E1,3.819743212773E1));
#472=CARTESIAN_POINT('',(6.310956410838E0,2.320664762793E1,3.876529665936E1));
#473=CARTESIAN_POINT('',(6.746951128981E0,2.283355712772E1,3.934199819718E1));
#474=CARTESIAN_POINT('',(7.200264216717E0,2.230024434477E1,3.997477878252E1));
#475=CARTESIAN_POINT('',(7.458276778034E0,2.184850497819E1,4.037479603950E1));
#476=CARTESIAN_POINT('',(7.569633861545E0,2.159178746138E1,4.056664919788E1));
#478=DIRECTION('',(-1.E0,0.E0,0.E0));
#479=VECTOR('',#478,1.368626966597E0);
#480=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,2.5E1));
#481=LINE('',#480,#479);
#482=DIRECTION('',(-1.E0,0.E0,0.E0));
#483=VECTOR('',#482,1.4E0);
#484=CARTESIAN_POINT('',(7.9E0,7.5E0,2.5E1));
#485=LINE('',#484,#483);
#486=CARTESIAN_POINT('',(6.4E0,1.914893617021E1,4.164946889081E1));
#487=CARTESIAN_POINT('',(6.492322371419E0,1.933585840906E1,4.161300041003E1));
#488=CARTESIAN_POINT('',(6.667739952141E0,1.968771434928E1,4.152582321276E1));
#489=CARTESIAN_POINT('',(6.896135913673E0,2.014569685423E1,4.136997263751E1));
#490=CARTESIAN_POINT('',(7.095976942103E0,2.055184368176E1,4.119636712444E1));
#491=CARTESIAN_POINT('',(7.272706386934E0,2.092074141646E1,4.100680629141E1));
#492=CARTESIAN_POINT('',(7.430162275943E0,2.126339332691E1,4.080070439480E1));
#493=CARTESIAN_POINT('',(7.525389356031E0,2.148423866463E1,4.064702383143E1));
#494=CARTESIAN_POINT('',(7.569633861545E0,2.159178746138E1,4.056664919788E1));
#496=DIRECTION('',(1.E0,1.848521336001E-13,-3.774758283725E-14));
#497=VECTOR('',#496,6.4E0);
#498=CARTESIAN_POINT('',(0.E0,1.914893617021E1,4.164946889082E1));
#499=LINE('',#498,#497);
#500=DIRECTION('',(0.E0,1.E0,0.E0));
#501=VECTOR('',#500,1.2E1);
#502=CARTESIAN_POINT('',(5.9E0,1.2E1,0.E0));
#503=LINE('',#502,#501);
#504=DIRECTION('',(0.E0,1.E0,0.E0));
#505=VECTOR('',#504,1.2E1);
#506=CARTESIAN_POINT('',(5.9E0,-1.2E1,0.E0));
#507=LINE('',#506,#505);
#508=CARTESIAN_POINT('',(6.5E0,-1.4E1,2.5E1));
#509=DIRECTION('',(1.E0,0.E0,0.E0));
#510=DIRECTION('',(0.E0,-1.E0,0.E0));
#511=AXIS2_PLACEMENT_3D('',#508,#509,#510);
#513=DIRECTION('',(1.E0,0.E0,0.E0));
#514=VECTOR('',#513,1.4E0);
#515=CARTESIAN_POINT('',(6.5E0,-7.5E0,2.5E1));
#516=LINE('',#515,#514);
#517=CARTESIAN_POINT('',(6.5E0,-1.4E1,2.5E1));
#518=DIRECTION('',(-1.E0,0.E0,0.E0));
#519=DIRECTION('',(0.E0,-1.E0,0.E0));
#520=AXIS2_PLACEMENT_3D('',#517,#518,#519);
#522=DIRECTION('',(1.E0,0.E0,0.E0));
#523=VECTOR('',#522,1.368626966597E0);
#524=CARTESIAN_POINT('',(6.5E0,-2.05E1,2.5E1));
#525=LINE('',#524,#523);
#526=DIRECTION('',(7.071067811865E-1,-7.071067811865E-1,0.E0));
#527=VECTOR('',#526,4.525483399594E0);
#528=CARTESIAN_POINT('',(3.3E0,-1.73E1,2.5E1));
#529=LINE('',#528,#527);
#530=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,0.E0));
#531=VECTOR('',#530,4.525483399594E0);
#532=CARTESIAN_POINT('',(3.3E0,-1.07E1,2.5E1));
#533=LINE('',#532,#531);
#534=CARTESIAN_POINT('',(3.3E0,-1.4E1,2.5E1));
#535=DIRECTION('',(-1.E0,0.E0,0.E0));
#536=DIRECTION('',(0.E0,-1.E0,0.E0));
#537=AXIS2_PLACEMENT_3D('',#534,#535,#536);
#539=CARTESIAN_POINT('',(3.3E0,-1.4E1,2.5E1));
#540=DIRECTION('',(1.E0,0.E0,0.E0));
#541=DIRECTION('',(0.E0,-1.E0,0.E0));
#542=AXIS2_PLACEMENT_3D('',#539,#540,#541);
#544=DIRECTION('',(1.E0,0.E0,0.E0));
#545=VECTOR('',#544,3.3E0);
#546=CARTESIAN_POINT('',(0.E0,-1.73E1,2.5E1));
#547=LINE('',#546,#545);
#548=DIRECTION('',(1.E0,0.E0,0.E0));
#549=VECTOR('',#548,3.3E0);
#550=CARTESIAN_POINT('',(0.E0,-1.07E1,2.5E1));
#551=LINE('',#550,#549);
#552=DIRECTION('',(-1.E0,0.E0,0.E0));
#553=VECTOR('',#552,3.E0);
#554=CARTESIAN_POINT('',(0.E0,2.05E1,3.E1));
#555=LINE('',#554,#553);
#556=DIRECTION('',(-1.E0,0.E0,0.E0));
#557=VECTOR('',#556,3.E0);
#558=CARTESIAN_POINT('',(0.E0,2.05E1,2.E1));
#559=LINE('',#558,#557);
#560=DIRECTION('',(-1.E0,0.E0,0.E0));
#561=VECTOR('',#560,3.E0);
#562=CARTESIAN_POINT('',(0.E0,2.15E1,2.E1));
#563=LINE('',#562,#561);
#564=DIRECTION('',(-1.E0,0.E0,0.E0));
#565=VECTOR('',#564,3.E0);
#566=CARTESIAN_POINT('',(0.E0,2.15E1,3.E1));
#567=LINE('',#566,#565);
#568=DIRECTION('',(0.E0,0.E0,-1.E0));
#569=VECTOR('',#568,1.E1);
#570=CARTESIAN_POINT('',(-3.E0,2.05E1,3.E1));
#571=LINE('',#570,#569);
#572=DIRECTION('',(0.E0,1.E0,0.E0));
#573=VECTOR('',#572,1.E0);
#574=CARTESIAN_POINT('',(-3.E0,2.05E1,2.E1));
#575=LINE('',#574,#573);
#576=DIRECTION('',(0.E0,0.E0,1.E0));
#577=VECTOR('',#576,1.E1);
#578=CARTESIAN_POINT('',(-3.E0,2.15E1,2.E1));
#579=LINE('',#578,#577);
#580=DIRECTION('',(0.E0,-1.E0,0.E0));
#581=VECTOR('',#580,1.E0);
#582=CARTESIAN_POINT('',(-3.E0,2.15E1,3.E1));
#583=LINE('',#582,#581);
#584=DIRECTION('',(-1.E0,0.E0,0.E0));
#585=VECTOR('',#584,3.E0);
#586=CARTESIAN_POINT('',(0.E0,-2.05E1,3.E1));
#587=LINE('',#586,#585);
#588=DIRECTION('',(-1.E0,0.E0,0.E0));
#589=VECTOR('',#588,3.E0);
#590=CARTESIAN_POINT('',(0.E0,-2.15E1,3.E1));
#591=LINE('',#590,#589);
#592=DIRECTION('',(-1.E0,0.E0,0.E0));
#593=VECTOR('',#592,3.E0);
#594=CARTESIAN_POINT('',(0.E0,-2.15E1,2.E1));
#595=LINE('',#594,#593);
#596=DIRECTION('',(-1.E0,0.E0,0.E0));
#597=VECTOR('',#596,3.E0);
#598=CARTESIAN_POINT('',(0.E0,-2.05E1,2.E1));
#599=LINE('',#598,#597);
#600=DIRECTION('',(0.E0,-1.E0,0.E0));
#601=VECTOR('',#600,1.E0);
#602=CARTESIAN_POINT('',(-3.E0,-2.05E1,3.E1));
#603=LINE('',#602,#601);
#604=DIRECTION('',(0.E0,0.E0,-1.E0));
#605=VECTOR('',#604,1.E1);
#606=CARTESIAN_POINT('',(-3.E0,-2.15E1,3.E1));
#607=LINE('',#606,#605);
#608=DIRECTION('',(0.E0,1.E0,0.E0));
#609=VECTOR('',#608,1.E0);
#610=CARTESIAN_POINT('',(-3.E0,-2.15E1,2.E1));
#611=LINE('',#610,#609);
#612=DIRECTION('',(0.E0,0.E0,1.E0));
#613=VECTOR('',#612,1.E1);
#614=CARTESIAN_POINT('',(-3.E0,-2.05E1,2.E1));
#615=LINE('',#614,#613);
#616=CARTESIAN_POINT('',(0.E0,-2.4E1,3.576050075737E1));
#617=CARTESIAN_POINT('',(3.9E0,-2.4E1,3.576050075737E1));
#618=VERTEX_POINT('',#616);
#619=VERTEX_POINT('',#617);
#620=CARTESIAN_POINT('',(0.E0,2.4E1,3.576050082614E1));
#621=CARTESIAN_POINT('',(3.9E0,2.4E1,3.576050075737E1));
#622=VERTEX_POINT('',#620);
#623=VERTEX_POINT('',#621);
#624=CARTESIAN_POINT('',(0.E0,1.914893617021E1,4.164946889082E1));
#625=VERTEX_POINT('',#624);
#626=CARTESIAN_POINT('',(0.E0,-1.914893617021E1,4.164946889082E1));
#627=VERTEX_POINT('',#626);
#628=CARTESIAN_POINT('',(7.9E0,2.E1,3.994817261099E1));
#629=CARTESIAN_POINT('',(7.9E0,-2.E1,3.994817261099E1));
#630=VERTEX_POINT('',#628);
#631=VERTEX_POINT('',#629);
#632=VERTEX_POINT('',#458);
#633=VERTEX_POINT('',#42);
#634=VERTEX_POINT('',#486);
#635=VERTEX_POINT('',#75);
#636=CARTESIAN_POINT('',(6.5E0,2.05E1,2.5E1));
#637=CARTESIAN_POINT('',(3.3E0,1.73E1,2.5E1));
#638=VERTEX_POINT('',#636);
#639=VERTEX_POINT('',#637);
#640=CARTESIAN_POINT('',(6.5E0,7.5E0,2.5E1));
#641=CARTESIAN_POINT('',(3.3E0,1.07E1,2.5E1));
#642=VERTEX_POINT('',#640);
#643=VERTEX_POINT('',#641);
#644=CARTESIAN_POINT('',(7.9E0,2.E1,2.25E1));
#645=CARTESIAN_POINT('',(7.9E0,7.5E0,2.5E1));
#646=VERTEX_POINT('',#644);
#647=VERTEX_POINT('',#645);
#648=CARTESIAN_POINT('',(7.9E0,2.E1,2.75E1));
#649=VERTEX_POINT('',#648);
#650=CARTESIAN_POINT('',(0.E0,1.73E1,2.5E1));
#651=CARTESIAN_POINT('',(0.E0,1.07E1,2.5E1));
#652=VERTEX_POINT('',#650);
#653=VERTEX_POINT('',#651);
#654=VERTEX_POINT('',#435);
#655=CARTESIAN_POINT('',(3.3E0,-1.73E1,2.5E1));
#656=CARTESIAN_POINT('',(6.5E0,-2.05E1,2.5E1));
#657=VERTEX_POINT('',#655);
#658=VERTEX_POINT('',#656);
#659=CARTESIAN_POINT('',(3.3E0,-1.07E1,2.5E1));
#660=CARTESIAN_POINT('',(6.5E0,-7.5E0,2.5E1));
#661=VERTEX_POINT('',#659);
#662=VERTEX_POINT('',#660);
#663=CARTESIAN_POINT('',(7.9E0,-2.E1,2.25E1));
#664=CARTESIAN_POINT('',(7.9E0,-7.5E0,2.5E1));
#665=VERTEX_POINT('',#663);
#666=VERTEX_POINT('',#664);
#667=CARTESIAN_POINT('',(7.9E0,-2.E1,2.75E1));
#668=VERTEX_POINT('',#667);
#669=CARTESIAN_POINT('',(0.E0,-1.73E1,2.5E1));
#670=CARTESIAN_POINT('',(0.E0,-1.07E1,2.5E1));
#671=VERTEX_POINT('',#669);
#672=VERTEX_POINT('',#670);
#673=VERTEX_POINT('',#65);
#674=CARTESIAN_POINT('',(8.9E0,2.4E1,7.E0));
#675=CARTESIAN_POINT('',(2.837822173509E0,2.4E1,-3.5E0));
#676=VERTEX_POINT('',#674);
#677=VERTEX_POINT('',#675);
#678=CARTESIAN_POINT('',(0.E0,2.4E1,1.415252187363E0));
#679=VERTEX_POINT('',#678);
#680=CARTESIAN_POINT('',(7.9E0,2.E1,7.E0));
#681=CARTESIAN_POINT('',(3.9E0,2.4E1,7.E0));
#682=VERTEX_POINT('',#680);
#683=VERTEX_POINT('',#681);
#684=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#685=CARTESIAN_POINT('',(0.E0,-2.4E1,6.E0));
#686=VERTEX_POINT('',#684);
#687=VERTEX_POINT('',#685);
#688=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#689=CARTESIAN_POINT('',(7.9E0,-1.2E1,8.265288547495E0));
#690=VERTEX_POINT('',#688);
#691=VERTEX_POINT('',#689);
#692=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#693=VERTEX_POINT('',#692);
#694=CARTESIAN_POINT('',(0.E0,-1.2E1,1.415252187363E0));
#695=CARTESIAN_POINT('',(0.E0,-1.2E1,6.E0));
#696=VERTEX_POINT('',#694);
#697=VERTEX_POINT('',#695);
#698=CARTESIAN_POINT('',(8.9E0,-1.2E1,7.E0));
#699=VERTEX_POINT('',#698);
#700=CARTESIAN_POINT('',(2.837822173509E0,-1.2E1,-3.5E0));
#701=VERTEX_POINT('',#700);
#702=CARTESIAN_POINT('',(7.9E0,0.E0,7.E0));
#703=CARTESIAN_POINT('',(7.9E0,0.E0,8.265288547495E0));
#704=VERTEX_POINT('',#702);
#705=VERTEX_POINT('',#703);
#706=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#707=CARTESIAN_POINT('',(7.9E0,1.2E1,8.265288547495E0));
#708=VERTEX_POINT('',#706);
#709=VERTEX_POINT('',#707);
#710=CARTESIAN_POINT('',(0.E0,0.E0,1.415252187363E0));
#711=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#712=VERTEX_POINT('',#710);
#713=VERTEX_POINT('',#711);
#714=CARTESIAN_POINT('',(0.E0,1.2E1,1.415252187363E0));
#715=CARTESIAN_POINT('',(0.E0,1.2E1,6.E0));
#716=VERTEX_POINT('',#714);
#717=VERTEX_POINT('',#715);
#718=CARTESIAN_POINT('',(8.9E0,0.E0,7.E0));
#719=VERTEX_POINT('',#718);
#720=CARTESIAN_POINT('',(8.9E0,1.2E1,7.E0));
#721=VERTEX_POINT('',#720);
#722=CARTESIAN_POINT('',(2.837822173509E0,0.E0,-3.5E0));
#723=VERTEX_POINT('',#722);
#724=CARTESIAN_POINT('',(2.837822173509E0,1.2E1,-3.5E0));
#725=VERTEX_POINT('',#724);
#726=CARTESIAN_POINT('',(1.19E1,2.4E1,0.E0));
#727=CARTESIAN_POINT('',(5.9E0,2.4E1,0.E0));
#728=VERTEX_POINT('',#726);
#729=VERTEX_POINT('',#727);
#730=CARTESIAN_POINT('',(1.19E1,-1.2E1,0.E0));
#731=CARTESIAN_POINT('',(5.9E0,-1.2E1,0.E0));
#732=VERTEX_POINT('',#730);
#733=VERTEX_POINT('',#731);
#734=CARTESIAN_POINT('',(1.19E1,0.E0,0.E0));
#735=CARTESIAN_POINT('',(5.9E0,0.E0,0.E0));
#736=VERTEX_POINT('',#734);
#737=VERTEX_POINT('',#735);
#738=CARTESIAN_POINT('',(1.19E1,1.2E1,0.E0));
#739=CARTESIAN_POINT('',(5.9E0,1.2E1,0.E0));
#740=VERTEX_POINT('',#738);
#741=VERTEX_POINT('',#739);
#742=CARTESIAN_POINT('',(-3.E0,2.05E1,3.E1));
#743=CARTESIAN_POINT('',(-3.E0,2.05E1,2.E1));
#744=VERTEX_POINT('',#742);
#745=VERTEX_POINT('',#743);
#746=CARTESIAN_POINT('',(-3.E0,2.15E1,2.E1));
#747=VERTEX_POINT('',#746);
#748=CARTESIAN_POINT('',(-3.E0,2.15E1,3.E1));
#749=VERTEX_POINT('',#748);
#750=CARTESIAN_POINT('',(0.E0,2.05E1,3.E1));
#751=CARTESIAN_POINT('',(0.E0,2.05E1,2.E1));
#752=VERTEX_POINT('',#750);
#753=VERTEX_POINT('',#751);
#754=CARTESIAN_POINT('',(0.E0,2.15E1,2.E1));
#755=VERTEX_POINT('',#754);
#756=CARTESIAN_POINT('',(0.E0,2.15E1,3.E1));
#757=VERTEX_POINT('',#756);
#758=CARTESIAN_POINT('',(-3.E0,-2.05E1,3.E1));
#759=CARTESIAN_POINT('',(-3.E0,-2.15E1,3.E1));
#760=VERTEX_POINT('',#758);
#761=VERTEX_POINT('',#759);
#762=CARTESIAN_POINT('',(-3.E0,-2.15E1,2.E1));
#763=VERTEX_POINT('',#762);
#764=CARTESIAN_POINT('',(-3.E0,-2.05E1,2.E1));
#765=VERTEX_POINT('',#764);
#766=CARTESIAN_POINT('',(0.E0,-2.05E1,3.E1));
#767=CARTESIAN_POINT('',(0.E0,-2.15E1,3.E1));
#768=VERTEX_POINT('',#766);
#769=VERTEX_POINT('',#767);
#770=CARTESIAN_POINT('',(0.E0,-2.15E1,2.E1));
#771=VERTEX_POINT('',#770);
#772=CARTESIAN_POINT('',(0.E0,-2.05E1,2.E1));
#773=VERTEX_POINT('',#772);
#774=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#775=DIRECTION('',(0.E0,1.E0,0.E0));
#776=DIRECTION('',(1.E0,0.E0,0.E0));
#777=AXIS2_PLACEMENT_3D('',#774,#775,#776);
#778=PLANE('',#777);
#780=ORIENTED_EDGE('',*,*,#779,.T.);
#782=ORIENTED_EDGE('',*,*,#781,.F.);
#784=ORIENTED_EDGE('',*,*,#783,.T.);
#786=ORIENTED_EDGE('',*,*,#785,.F.);
#787=EDGE_LOOP('',(#780,#782,#784,#786));
#788=FACE_OUTER_BOUND('',#787,.F.);
#789=ADVANCED_FACE('',(#788),#778,.F.);
#790=CARTESIAN_POINT('',(0.E0,-1.2E1,6.E0));
#791=DIRECTION('',(-2.756373558170E-1,0.E0,9.612616959383E-1));
#792=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#793=AXIS2_PLACEMENT_3D('',#790,#791,#792);
#794=PLANE('',#793);
#795=ORIENTED_EDGE('',*,*,#779,.F.);
#797=ORIENTED_EDGE('',*,*,#796,.T.);
#799=ORIENTED_EDGE('',*,*,#798,.T.);
#801=ORIENTED_EDGE('',*,*,#800,.F.);
#803=ORIENTED_EDGE('',*,*,#802,.F.);
#804=EDGE_LOOP('',(#795,#797,#799,#801,#803));
#805=FACE_OUTER_BOUND('',#804,.F.);
#806=ADVANCED_FACE('',(#805),#794,.F.);
#807=CARTESIAN_POINT('',(3.9E0,-2.E1,-4.85E1));
#808=DIRECTION('',(0.E0,0.E0,1.E0));
#809=DIRECTION('',(1.E0,0.E0,0.E0));
#810=AXIS2_PLACEMENT_3D('',#807,#808,#809);
#811=CYLINDRICAL_SURFACE('',#810,4.E0);
#812=ORIENTED_EDGE('',*,*,#796,.F.);
#813=ORIENTED_EDGE('',*,*,#785,.T.);
#815=ORIENTED_EDGE('',*,*,#814,.F.);
#817=ORIENTED_EDGE('',*,*,#816,.F.);
#819=ORIENTED_EDGE('',*,*,#818,.F.);
#821=ORIENTED_EDGE('',*,*,#820,.F.);
#823=ORIENTED_EDGE('',*,*,#822,.F.);
#825=ORIENTED_EDGE('',*,*,#824,.F.);
#826=EDGE_LOOP('',(#812,#813,#815,#817,#819,#821,#823,#825));
#827=FACE_OUTER_BOUND('',#826,.F.);
#828=ADVANCED_FACE('',(#827),#811,.T.);
#829=CARTESIAN_POINT('',(0.E0,-1.8E1,3.576050075737E1));
#830=DIRECTION('',(1.E0,0.E0,0.E0));
#831=DIRECTION('',(0.E0,0.E0,-1.E0));
#832=AXIS2_PLACEMENT_3D('',#829,#830,#831);
#833=CYLINDRICAL_SURFACE('',#832,5.999999999998E0);
#835=ORIENTED_EDGE('',*,*,#834,.F.);
#836=ORIENTED_EDGE('',*,*,#814,.T.);
#837=ORIENTED_EDGE('',*,*,#783,.F.);
#839=ORIENTED_EDGE('',*,*,#838,.F.);
#841=ORIENTED_EDGE('',*,*,#840,.T.);
#842=EDGE_LOOP('',(#835,#836,#837,#839,#841));
#843=FACE_OUTER_BOUND('',#842,.F.);
#844=ADVANCED_FACE('',(#843),#833,.T.);
#845=CARTESIAN_POINT('',(6.4E0,0.E0,-5.65E1));
#846=DIRECTION('',(1.E0,0.E0,0.E0));
#847=DIRECTION('',(0.E0,-3.420201433257E-1,9.396926207859E-1));
#848=AXIS2_PLACEMENT_3D('',#845,#846,#847);
#849=TOROIDAL_SURFACE('',#848,9.85E1,1.5E0);
#850=ORIENTED_EDGE('',*,*,#816,.T.);
#851=ORIENTED_EDGE('',*,*,#834,.T.);
#853=ORIENTED_EDGE('',*,*,#852,.F.);
#855=ORIENTED_EDGE('',*,*,#854,.T.);
#857=ORIENTED_EDGE('',*,*,#856,.T.);
#859=ORIENTED_EDGE('',*,*,#858,.T.);
#860=EDGE_LOOP('',(#850,#851,#853,#855,#857,#859));
#861=FACE_OUTER_BOUND('',#860,.F.);
#862=ADVANCED_FACE('',(#861),#849,.T.);
#863=CARTESIAN_POINT('',(0.E0,0.E0,-5.649999999999E1));
#864=DIRECTION('',(1.E0,0.E0,0.E0));
#865=DIRECTION('',(0.E0,0.E0,-1.E0));
#866=AXIS2_PLACEMENT_3D('',#863,#864,#865);
#867=CYLINDRICAL_SURFACE('',#866,9.999999999999E1);
#868=ORIENTED_EDGE('',*,*,#852,.T.);
#869=ORIENTED_EDGE('',*,*,#840,.F.);
#871=ORIENTED_EDGE('',*,*,#870,.F.);
#873=ORIENTED_EDGE('',*,*,#872,.T.);
#874=EDGE_LOOP('',(#868,#869,#871,#873));
#875=FACE_OUTER_BOUND('',#874,.F.);
#876=ADVANCED_FACE('',(#875),#867,.T.);
#877=CARTESIAN_POINT('',(0.E0,-2.4E1,1.7E0));
#878=DIRECTION('',(-1.E0,0.E0,0.E0));
#879=DIRECTION('',(0.E0,0.E0,1.E0));
#880=AXIS2_PLACEMENT_3D('',#877,#878,#879);
#881=PLANE('',#880);
#883=ORIENTED_EDGE('',*,*,#882,.T.);
#885=ORIENTED_EDGE('',*,*,#884,.T.);
#887=ORIENTED_EDGE('',*,*,#886,.F.);
#889=ORIENTED_EDGE('',*,*,#888,.T.);
#891=ORIENTED_EDGE('',*,*,#890,.T.);
#893=ORIENTED_EDGE('',*,*,#892,.T.);
#894=ORIENTED_EDGE('',*,*,#870,.T.);
#895=ORIENTED_EDGE('',*,*,#838,.T.);
#896=ORIENTED_EDGE('',*,*,#781,.T.);
#897=ORIENTED_EDGE('',*,*,#802,.T.);
#899=ORIENTED_EDGE('',*,*,#898,.F.);
#901=ORIENTED_EDGE('',*,*,#900,.T.);
#902=EDGE_LOOP('',(#883,#885,#887,#889,#891,#893,#894,#895,#896,#897,#899,
#901));
#903=FACE_OUTER_BOUND('',#902,.F.);
#905=ORIENTED_EDGE('',*,*,#904,.T.);
#907=ORIENTED_EDGE('',*,*,#906,.T.);
#908=EDGE_LOOP('',(#905,#907));
#909=FACE_BOUND('',#908,.F.);
#911=ORIENTED_EDGE('',*,*,#910,.F.);
#913=ORIENTED_EDGE('',*,*,#912,.F.);
#914=EDGE_LOOP('',(#911,#913));
#915=FACE_BOUND('',#914,.F.);
#917=ORIENTED_EDGE('',*,*,#916,.F.);
#919=ORIENTED_EDGE('',*,*,#918,.F.);
#921=ORIENTED_EDGE('',*,*,#920,.F.);
#923=ORIENTED_EDGE('',*,*,#922,.F.);
#924=EDGE_LOOP('',(#917,#919,#921,#923));
#925=FACE_BOUND('',#924,.F.);
#927=ORIENTED_EDGE('',*,*,#926,.F.);
#929=ORIENTED_EDGE('',*,*,#928,.F.);
#931=ORIENTED_EDGE('',*,*,#930,.F.);
#933=ORIENTED_EDGE('',*,*,#932,.F.);
#934=EDGE_LOOP('',(#927,#929,#931,#933));
#935=FACE_BOUND('',#934,.F.);
#936=ADVANCED_FACE('',(#903,#909,#915,#925,#935),#881,.T.);
#937=CARTESIAN_POINT('',(1.05E1,1.4E1,2.5E1));
#938=DIRECTION('',(-1.E0,0.E0,0.E0));
#939=DIRECTION('',(0.E0,1.E0,0.E0));
#940=AXIS2_PLACEMENT_3D('',#937,#938,#939);
#941=CYLINDRICAL_SURFACE('',#940,3.3E0);
#942=ORIENTED_EDGE('',*,*,#904,.F.);
#944=ORIENTED_EDGE('',*,*,#943,.F.);
#946=ORIENTED_EDGE('',*,*,#945,.T.);
#948=ORIENTED_EDGE('',*,*,#947,.T.);
#949=EDGE_LOOP('',(#942,#944,#946,#948));
#950=FACE_OUTER_BOUND('',#949,.F.);
#951=ADVANCED_FACE('',(#950),#941,.F.);
#952=CARTESIAN_POINT('',(1.05E1,1.4E1,2.5E1));
#953=DIRECTION('',(-1.E0,0.E0,0.E0));
#954=DIRECTION('',(0.E0,1.E0,0.E0));
#955=AXIS2_PLACEMENT_3D('',#952,#953,#954);
#956=CYLINDRICAL_SURFACE('',#955,3.3E0);
#957=ORIENTED_EDGE('',*,*,#906,.F.);
#958=ORIENTED_EDGE('',*,*,#947,.F.);
#960=ORIENTED_EDGE('',*,*,#959,.F.);
#961=ORIENTED_EDGE('',*,*,#943,.T.);
#962=EDGE_LOOP('',(#957,#958,#960,#961));
#963=FACE_OUTER_BOUND('',#962,.F.);
#964=ADVANCED_FACE('',(#963),#956,.F.);
#965=CARTESIAN_POINT('',(4.9E0,1.4E1,2.5E1));
#966=DIRECTION('',(1.E0,0.E0,0.E0));
#967=DIRECTION('',(0.E0,-1.E0,0.E0));
#968=AXIS2_PLACEMENT_3D('',#965,#966,#967);
#969=CONICAL_SURFACE('',#968,4.9E0,4.5E1);
#971=ORIENTED_EDGE('',*,*,#970,.T.);
#972=ORIENTED_EDGE('',*,*,#959,.T.);
#974=ORIENTED_EDGE('',*,*,#973,.F.);
#976=ORIENTED_EDGE('',*,*,#975,.F.);
#977=EDGE_LOOP('',(#971,#972,#974,#976));
#978=FACE_OUTER_BOUND('',#977,.F.);
#979=ADVANCED_FACE('',(#978),#969,.F.);
#980=CARTESIAN_POINT('',(4.9E0,1.4E1,2.5E1));
#981=DIRECTION('',(1.E0,0.E0,0.E0));
#982=DIRECTION('',(0.E0,-1.E0,0.E0));
#983=AXIS2_PLACEMENT_3D('',#980,#981,#982);
#984=CONICAL_SURFACE('',#983,4.9E0,4.5E1);
#985=ORIENTED_EDGE('',*,*,#970,.F.);
#987=ORIENTED_EDGE('',*,*,#986,.T.);
#988=ORIENTED_EDGE('',*,*,#973,.T.);
#989=ORIENTED_EDGE('',*,*,#945,.F.);
#990=EDGE_LOOP('',(#985,#987,#988,#989));
#991=FACE_OUTER_BOUND('',#990,.F.);
#992=ADVANCED_FACE('',(#991),#984,.F.);
#993=CARTESIAN_POINT('',(1.05E1,1.4E1,2.5E1));
#994=DIRECTION('',(-1.E0,0.E0,0.E0));
#995=DIRECTION('',(0.E0,1.E0,0.E0));
#996=AXIS2_PLACEMENT_3D('',#993,#994,#995);
#997=CYLINDRICAL_SURFACE('',#996,6.5E0);
#999=ORIENTED_EDGE('',*,*,#998,.T.);
#1001=ORIENTED_EDGE('',*,*,#1000,.T.);
#1002=ORIENTED_EDGE('',*,*,#986,.F.);
#1004=ORIENTED_EDGE('',*,*,#1003,.F.);
#1006=ORIENTED_EDGE('',*,*,#1005,.T.);
#1007=EDGE_LOOP('',(#999,#1001,#1002,#1004,#1006));
#1008=FACE_OUTER_BOUND('',#1007,.F.);
#1009=ADVANCED_FACE('',(#1008),#997,.F.);
#1010=CARTESIAN_POINT('',(7.9E0,-2.4E1,4.35E1));
#1011=DIRECTION('',(1.E0,0.E0,0.E0));
#1012=DIRECTION('',(0.E0,0.E0,-1.E0));
#1013=AXIS2_PLACEMENT_3D('',#1010,#1011,#1012);
#1014=PLANE('',#1013);
#1016=ORIENTED_EDGE('',*,*,#1015,.F.);
#1018=ORIENTED_EDGE('',*,*,#1017,.F.);
#1020=ORIENTED_EDGE('',*,*,#1019,.T.);
#1021=ORIENTED_EDGE('',*,*,#798,.F.);
#1022=ORIENTED_EDGE('',*,*,#824,.T.);
#1024=ORIENTED_EDGE('',*,*,#1023,.T.);
#1026=ORIENTED_EDGE('',*,*,#1025,.T.);
#1027=ORIENTED_EDGE('',*,*,#818,.T.);
#1028=ORIENTED_EDGE('',*,*,#858,.F.);
#1030=ORIENTED_EDGE('',*,*,#1029,.F.);
#1032=ORIENTED_EDGE('',*,*,#1031,.F.);
#1033=ORIENTED_EDGE('',*,*,#998,.F.);
#1035=ORIENTED_EDGE('',*,*,#1034,.F.);
#1037=ORIENTED_EDGE('',*,*,#1036,.F.);
#1039=ORIENTED_EDGE('',*,*,#1038,.T.);
#1041=ORIENTED_EDGE('',*,*,#1040,.F.);
#1042=EDGE_LOOP('',(#1016,#1018,#1020,#1021,#1022,#1024,#1026,#1027,#1028,#1030,
#1032,#1033,#1035,#1037,#1039,#1041));
#1043=FACE_OUTER_BOUND('',#1042,.F.);
#1044=ADVANCED_FACE('',(#1043),#1014,.T.);
#1045=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1046=DIRECTION('',(0.E0,1.E0,0.E0));
#1047=DIRECTION('',(1.E0,0.E0,0.E0));
#1048=AXIS2_PLACEMENT_3D('',#1045,#1046,#1047);
#1049=PLANE('',#1048);
#1050=ORIENTED_EDGE('',*,*,#1015,.T.);
#1052=ORIENTED_EDGE('',*,*,#1051,.F.);
#1053=ORIENTED_EDGE('',*,*,#882,.F.);
#1055=ORIENTED_EDGE('',*,*,#1054,.F.);
#1057=ORIENTED_EDGE('',*,*,#1056,.F.);
#1059=ORIENTED_EDGE('',*,*,#1058,.F.);
#1060=EDGE_LOOP('',(#1050,#1052,#1053,#1055,#1057,#1059));
#1061=FACE_OUTER_BOUND('',#1060,.F.);
#1063=ORIENTED_EDGE('',*,*,#1062,.T.);
#1065=ORIENTED_EDGE('',*,*,#1064,.T.);
#1066=EDGE_LOOP('',(#1063,#1065));
#1067=FACE_BOUND('',#1066,.F.);
#1068=ADVANCED_FACE('',(#1061,#1067),#1049,.T.);
#1069=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#1070=DIRECTION('',(-2.756373558170E-1,0.E0,9.612616959383E-1));
#1071=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#1072=AXIS2_PLACEMENT_3D('',#1069,#1070,#1071);
#1073=PLANE('',#1072);
#1074=ORIENTED_EDGE('',*,*,#1040,.T.);
#1076=ORIENTED_EDGE('',*,*,#1075,.F.);
#1077=ORIENTED_EDGE('',*,*,#884,.F.);
#1078=ORIENTED_EDGE('',*,*,#1051,.T.);
#1079=EDGE_LOOP('',(#1074,#1076,#1077,#1078));
#1080=FACE_OUTER_BOUND('',#1079,.F.);
#1081=ADVANCED_FACE('',(#1080),#1073,.F.);
#1082=CARTESIAN_POINT('',(0.E0,1.2E1,0.E0));
#1083=DIRECTION('',(0.E0,1.E0,0.E0));
#1084=DIRECTION('',(1.E0,0.E0,0.E0));
#1085=AXIS2_PLACEMENT_3D('',#1082,#1083,#1084);
#1086=PLANE('',#1085);
#1087=ORIENTED_EDGE('',*,*,#1038,.F.);
#1089=ORIENTED_EDGE('',*,*,#1088,.T.);
#1091=ORIENTED_EDGE('',*,*,#1090,.T.);
#1093=ORIENTED_EDGE('',*,*,#1092,.T.);
#1094=ORIENTED_EDGE('',*,*,#886,.T.);
#1095=ORIENTED_EDGE('',*,*,#1075,.T.);
#1096=EDGE_LOOP('',(#1087,#1089,#1091,#1093,#1094,#1095));
#1097=FACE_OUTER_BOUND('',#1096,.F.);
#1099=ORIENTED_EDGE('',*,*,#1098,.F.);
#1101=ORIENTED_EDGE('',*,*,#1100,.F.);
#1102=EDGE_LOOP('',(#1099,#1101));
#1103=FACE_BOUND('',#1102,.F.);
#1104=ADVANCED_FACE('',(#1097,#1103),#1086,.F.);
#1105=CARTESIAN_POINT('',(0.E0,-2.4E1,7.E0));
#1106=DIRECTION('',(0.E0,0.E0,1.E0));
#1107=DIRECTION('',(1.E0,0.E0,0.E0));
#1108=AXIS2_PLACEMENT_3D('',#1105,#1106,#1107);
#1109=PLANE('',#1108);
#1110=ORIENTED_EDGE('',*,*,#1058,.T.);
#1112=ORIENTED_EDGE('',*,*,#1111,.F.);
#1114=ORIENTED_EDGE('',*,*,#1113,.F.);
#1115=ORIENTED_EDGE('',*,*,#1017,.T.);
#1116=EDGE_LOOP('',(#1110,#1112,#1114,#1115));
#1117=FACE_OUTER_BOUND('',#1116,.F.);
#1118=ADVANCED_FACE('',(#1117),#1109,.T.);
#1119=CARTESIAN_POINT('',(0.E0,-2.4E1,7.E0));
#1120=DIRECTION('',(0.E0,0.E0,1.E0));
#1121=DIRECTION('',(1.E0,0.E0,0.E0));
#1122=AXIS2_PLACEMENT_3D('',#1119,#1120,#1121);
#1123=PLANE('',#1122);
#1124=ORIENTED_EDGE('',*,*,#1088,.F.);
#1125=ORIENTED_EDGE('',*,*,#1036,.T.);
#1127=ORIENTED_EDGE('',*,*,#1126,.T.);
#1129=ORIENTED_EDGE('',*,*,#1128,.T.);
#1131=ORIENTED_EDGE('',*,*,#1130,.F.);
#1132=EDGE_LOOP('',(#1124,#1125,#1127,#1129,#1131));
#1133=FACE_OUTER_BOUND('',#1132,.F.);
#1134=ADVANCED_FACE('',(#1133),#1123,.T.);
#1135=CARTESIAN_POINT('',(8.9E0,-2.4E1,1.074292564629E-14));
#1136=DIRECTION('',(0.E0,1.E0,0.E0));
#1137=DIRECTION('',(1.E0,0.E0,0.E0));
#1138=AXIS2_PLACEMENT_3D('',#1135,#1136,#1137);
#1139=CYLINDRICAL_SURFACE('',#1138,7.E0);
#1140=ORIENTED_EDGE('',*,*,#1056,.T.);
#1142=ORIENTED_EDGE('',*,*,#1141,.F.);
#1144=ORIENTED_EDGE('',*,*,#1143,.F.);
#1145=ORIENTED_EDGE('',*,*,#1111,.T.);
#1146=EDGE_LOOP('',(#1140,#1142,#1144,#1145));
#1147=FACE_OUTER_BOUND('',#1146,.F.);
#1148=ADVANCED_FACE('',(#1147),#1139,.T.);
#1149=CARTESIAN_POINT('',(8.9E0,-2.4E1,1.074292564629E-14));
#1150=DIRECTION('',(0.E0,1.E0,0.E0));
#1151=DIRECTION('',(1.E0,0.E0,0.E0));
#1152=AXIS2_PLACEMENT_3D('',#1149,#1150,#1151);
#1153=CYLINDRICAL_SURFACE('',#1152,7.E0);
#1154=ORIENTED_EDGE('',*,*,#1090,.F.);
#1155=ORIENTED_EDGE('',*,*,#1130,.T.);
#1157=ORIENTED_EDGE('',*,*,#1156,.T.);
#1159=ORIENTED_EDGE('',*,*,#1158,.F.);
#1160=EDGE_LOOP('',(#1154,#1155,#1157,#1159));
#1161=FACE_OUTER_BOUND('',#1160,.F.);
#1162=ADVANCED_FACE('',(#1161),#1153,.T.);
#1163=CARTESIAN_POINT('',(2.837822173509E0,-2.4E1,-3.5E0));
#1164=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#1165=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#1166=AXIS2_PLACEMENT_3D('',#1163,#1164,#1165);
#1167=PLANE('',#1166);
#1168=ORIENTED_EDGE('',*,*,#1054,.T.);
#1169=ORIENTED_EDGE('',*,*,#900,.F.);
#1171=ORIENTED_EDGE('',*,*,#1170,.F.);
#1172=ORIENTED_EDGE('',*,*,#1141,.T.);
#1173=EDGE_LOOP('',(#1168,#1169,#1171,#1172));
#1174=FACE_OUTER_BOUND('',#1173,.F.);
#1175=ADVANCED_FACE('',(#1174),#1167,.T.);
#1176=CARTESIAN_POINT('',(2.837822173509E0,-2.4E1,-3.5E0));
#1177=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#1178=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#1179=AXIS2_PLACEMENT_3D('',#1176,#1177,#1178);
#1180=PLANE('',#1179);
#1181=ORIENTED_EDGE('',*,*,#1092,.F.);
#1182=ORIENTED_EDGE('',*,*,#1158,.T.);
#1184=ORIENTED_EDGE('',*,*,#1183,.T.);
#1185=ORIENTED_EDGE('',*,*,#888,.F.);
#1186=EDGE_LOOP('',(#1181,#1182,#1184,#1185));
#1187=FACE_OUTER_BOUND('',#1186,.F.);
#1188=ADVANCED_FACE('',(#1187),#1180,.T.);
#1189=CARTESIAN_POINT('',(0.E0,-1.2E1,0.E0));
#1190=DIRECTION('',(0.E0,1.E0,0.E0));
#1191=DIRECTION('',(1.E0,0.E0,0.E0));
#1192=AXIS2_PLACEMENT_3D('',#1189,#1190,#1191);
#1193=PLANE('',#1192);
#1194=ORIENTED_EDGE('',*,*,#1019,.F.);
#1195=ORIENTED_EDGE('',*,*,#1113,.T.);
#1196=ORIENTED_EDGE('',*,*,#1143,.T.);
#1197=ORIENTED_EDGE('',*,*,#1170,.T.);
#1198=ORIENTED_EDGE('',*,*,#898,.T.);
#1199=ORIENTED_EDGE('',*,*,#800,.T.);
#1200=EDGE_LOOP('',(#1194,#1195,#1196,#1197,#1198,#1199));
#1201=FACE_OUTER_BOUND('',#1200,.F.);
#1203=ORIENTED_EDGE('',*,*,#1202,.F.);
#1205=ORIENTED_EDGE('',*,*,#1204,.F.);
#1206=EDGE_LOOP('',(#1203,#1205));
#1207=FACE_BOUND('',#1206,.F.);
#1208=ADVANCED_FACE('',(#1201,#1207),#1193,.F.);
#1209=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1210=DIRECTION('',(0.E0,1.E0,0.E0));
#1211=DIRECTION('',(1.E0,0.E0,0.E0));
#1212=AXIS2_PLACEMENT_3D('',#1209,#1210,#1211);
#1213=CYLINDRICAL_SURFACE('',#1212,3.E0);
#1215=ORIENTED_EDGE('',*,*,#1214,.F.);
#1217=ORIENTED_EDGE('',*,*,#1216,.F.);
#1218=ORIENTED_EDGE('',*,*,#1098,.T.);
#1220=ORIENTED_EDGE('',*,*,#1219,.T.);
#1221=EDGE_LOOP('',(#1215,#1217,#1218,#1220));
#1222=FACE_OUTER_BOUND('',#1221,.F.);
#1223=ADVANCED_FACE('',(#1222),#1213,.F.);
#1224=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1225=DIRECTION('',(0.E0,1.E0,0.E0));
#1226=DIRECTION('',(1.E0,0.E0,0.E0));
#1227=AXIS2_PLACEMENT_3D('',#1224,#1225,#1226);
#1228=CYLINDRICAL_SURFACE('',#1227,3.E0);
#1229=ORIENTED_EDGE('',*,*,#1202,.T.);
#1231=ORIENTED_EDGE('',*,*,#1230,.T.);
#1232=ORIENTED_EDGE('',*,*,#1062,.F.);
#1234=ORIENTED_EDGE('',*,*,#1233,.F.);
#1235=EDGE_LOOP('',(#1229,#1231,#1232,#1234));
#1236=FACE_OUTER_BOUND('',#1235,.F.);
#1237=ADVANCED_FACE('',(#1236),#1228,.F.);
#1238=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1239=DIRECTION('',(0.E0,1.E0,0.E0));
#1240=DIRECTION('',(1.E0,0.E0,0.E0));
#1241=AXIS2_PLACEMENT_3D('',#1238,#1239,#1240);
#1242=PLANE('',#1241);
#1243=ORIENTED_EDGE('',*,*,#890,.F.);
#1244=ORIENTED_EDGE('',*,*,#1183,.F.);
#1245=ORIENTED_EDGE('',*,*,#1156,.F.);
#1246=ORIENTED_EDGE('',*,*,#1128,.F.);
#1248=ORIENTED_EDGE('',*,*,#1247,.T.);
#1250=ORIENTED_EDGE('',*,*,#1249,.F.);
#1251=EDGE_LOOP('',(#1243,#1244,#1245,#1246,#1248,#1250));
#1252=FACE_OUTER_BOUND('',#1251,.F.);
#1253=ORIENTED_EDGE('',*,*,#1214,.T.);
#1255=ORIENTED_EDGE('',*,*,#1254,.T.);
#1256=EDGE_LOOP('',(#1253,#1255));
#1257=FACE_BOUND('',#1256,.F.);
#1258=ADVANCED_FACE('',(#1252,#1257),#1242,.T.);
#1259=CARTESIAN_POINT('',(3.9E0,2.E1,-4.85E1));
#1260=DIRECTION('',(0.E0,0.E0,1.E0));
#1261=DIRECTION('',(1.E0,0.E0,0.E0));
#1262=AXIS2_PLACEMENT_3D('',#1259,#1260,#1261);
#1263=CYLINDRICAL_SURFACE('',#1262,4.E0);
#1264=ORIENTED_EDGE('',*,*,#1126,.F.);
#1265=ORIENTED_EDGE('',*,*,#1034,.T.);
#1266=ORIENTED_EDGE('',*,*,#1005,.F.);
#1268=ORIENTED_EDGE('',*,*,#1267,.F.);
#1269=ORIENTED_EDGE('',*,*,#1029,.T.);
#1270=ORIENTED_EDGE('',*,*,#856,.F.);
#1272=ORIENTED_EDGE('',*,*,#1271,.F.);
#1273=ORIENTED_EDGE('',*,*,#1247,.F.);
#1274=EDGE_LOOP('',(#1264,#1265,#1266,#1268,#1269,#1270,#1272,#1273));
#1275=FACE_OUTER_BOUND('',#1274,.F.);
#1276=ADVANCED_FACE('',(#1275),#1263,.T.);
#1277=CARTESIAN_POINT('',(1.05E1,1.4E1,2.5E1));
#1278=DIRECTION('',(-1.E0,0.E0,0.E0));
#1279=DIRECTION('',(0.E0,1.E0,0.E0));
#1280=AXIS2_PLACEMENT_3D('',#1277,#1278,#1279);
#1281=CYLINDRICAL_SURFACE('',#1280,6.5E0);
#1282=ORIENTED_EDGE('',*,*,#1031,.T.);
#1283=ORIENTED_EDGE('',*,*,#1267,.T.);
#1284=ORIENTED_EDGE('',*,*,#1003,.T.);
#1285=ORIENTED_EDGE('',*,*,#975,.T.);
#1286=ORIENTED_EDGE('',*,*,#1000,.F.);
#1287=EDGE_LOOP('',(#1282,#1283,#1284,#1285,#1286));
#1288=FACE_OUTER_BOUND('',#1287,.F.);
#1289=ADVANCED_FACE('',(#1288),#1281,.F.);
#1290=CARTESIAN_POINT('',(0.E0,1.8E1,3.576050075737E1));
#1291=DIRECTION('',(1.E0,0.E0,0.E0));
#1292=DIRECTION('',(0.E0,0.E0,-1.E0));
#1293=AXIS2_PLACEMENT_3D('',#1290,#1291,#1292);
#1294=CYLINDRICAL_SURFACE('',#1293,5.999999999998E0);
#1295=ORIENTED_EDGE('',*,*,#854,.F.);
#1296=ORIENTED_EDGE('',*,*,#872,.F.);
#1297=ORIENTED_EDGE('',*,*,#892,.F.);
#1298=ORIENTED_EDGE('',*,*,#1249,.T.);
#1299=ORIENTED_EDGE('',*,*,#1271,.T.);
#1300=EDGE_LOOP('',(#1295,#1296,#1297,#1298,#1299));
#1301=FACE_OUTER_BOUND('',#1300,.F.);
#1302=ADVANCED_FACE('',(#1301),#1294,.T.);
#1303=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1304=DIRECTION('',(0.E0,1.E0,0.E0));
#1305=DIRECTION('',(1.E0,0.E0,0.E0));
#1306=AXIS2_PLACEMENT_3D('',#1303,#1304,#1305);
#1307=CYLINDRICAL_SURFACE('',#1306,3.E0);
#1308=ORIENTED_EDGE('',*,*,#1254,.F.);
#1309=ORIENTED_EDGE('',*,*,#1219,.F.);
#1310=ORIENTED_EDGE('',*,*,#1100,.T.);
#1311=ORIENTED_EDGE('',*,*,#1216,.T.);
#1312=EDGE_LOOP('',(#1308,#1309,#1310,#1311));
#1313=FACE_OUTER_BOUND('',#1312,.F.);
#1314=ADVANCED_FACE('',(#1313),#1307,.F.);
#1315=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1316=DIRECTION('',(0.E0,1.E0,0.E0));
#1317=DIRECTION('',(1.E0,0.E0,0.E0));
#1318=AXIS2_PLACEMENT_3D('',#1315,#1316,#1317);
#1319=CYLINDRICAL_SURFACE('',#1318,3.E0);
#1320=ORIENTED_EDGE('',*,*,#1204,.T.);
#1321=ORIENTED_EDGE('',*,*,#1233,.T.);
#1322=ORIENTED_EDGE('',*,*,#1064,.F.);
#1323=ORIENTED_EDGE('',*,*,#1230,.F.);
#1324=EDGE_LOOP('',(#1320,#1321,#1322,#1323));
#1325=FACE_OUTER_BOUND('',#1324,.F.);
#1326=ADVANCED_FACE('',(#1325),#1319,.F.);
#1327=CARTESIAN_POINT('',(-5.E-1,-1.4E1,2.5E1));
#1328=DIRECTION('',(1.E0,0.E0,0.E0));
#1329=DIRECTION('',(0.E0,-1.E0,0.E0));
#1330=AXIS2_PLACEMENT_3D('',#1327,#1328,#1329);
#1331=CYLINDRICAL_SURFACE('',#1330,6.5E0);
#1332=ORIENTED_EDGE('',*,*,#1023,.F.);
#1333=ORIENTED_EDGE('',*,*,#822,.T.);
#1335=ORIENTED_EDGE('',*,*,#1334,.F.);
#1337=ORIENTED_EDGE('',*,*,#1336,.T.);
#1339=ORIENTED_EDGE('',*,*,#1338,.T.);
#1340=EDGE_LOOP('',(#1332,#1333,#1335,#1337,#1339));
#1341=FACE_OUTER_BOUND('',#1340,.F.);
#1342=ADVANCED_FACE('',(#1341),#1331,.F.);
#1343=CARTESIAN_POINT('',(-5.E-1,-1.4E1,2.5E1));
#1344=DIRECTION('',(1.E0,0.E0,0.E0));
#1345=DIRECTION('',(0.E0,-1.E0,0.E0));
#1346=AXIS2_PLACEMENT_3D('',#1343,#1344,#1345);
#1347=CYLINDRICAL_SURFACE('',#1346,6.5E0);
#1348=ORIENTED_EDGE('',*,*,#1025,.F.);
#1349=ORIENTED_EDGE('',*,*,#1338,.F.);
#1351=ORIENTED_EDGE('',*,*,#1350,.F.);
#1352=ORIENTED_EDGE('',*,*,#1334,.T.);
#1353=ORIENTED_EDGE('',*,*,#820,.T.);
#1354=EDGE_LOOP('',(#1348,#1349,#1351,#1352,#1353));
#1355=FACE_OUTER_BOUND('',#1354,.F.);
#1356=ADVANCED_FACE('',(#1355),#1347,.F.);
#1357=CARTESIAN_POINT('',(4.9E0,-1.4E1,2.5E1));
#1358=DIRECTION('',(1.E0,0.E0,0.E0));
#1359=DIRECTION('',(0.E0,-1.E0,0.E0));
#1360=AXIS2_PLACEMENT_3D('',#1357,#1358,#1359);
#1361=CONICAL_SURFACE('',#1360,4.9E0,4.5E1);
#1363=ORIENTED_EDGE('',*,*,#1362,.T.);
#1364=ORIENTED_EDGE('',*,*,#1350,.T.);
#1366=ORIENTED_EDGE('',*,*,#1365,.F.);
#1368=ORIENTED_EDGE('',*,*,#1367,.F.);
#1369=EDGE_LOOP('',(#1363,#1364,#1366,#1368));
#1370=FACE_OUTER_BOUND('',#1369,.F.);
#1371=ADVANCED_FACE('',(#1370),#1361,.F.);
#1372=CARTESIAN_POINT('',(4.9E0,-1.4E1,2.5E1));
#1373=DIRECTION('',(1.E0,0.E0,0.E0));
#1374=DIRECTION('',(0.E0,-1.E0,0.E0));
#1375=AXIS2_PLACEMENT_3D('',#1372,#1373,#1374);
#1376=CONICAL_SURFACE('',#1375,4.9E0,4.5E1);
#1377=ORIENTED_EDGE('',*,*,#1362,.F.);
#1379=ORIENTED_EDGE('',*,*,#1378,.T.);
#1380=ORIENTED_EDGE('',*,*,#1365,.T.);
#1381=ORIENTED_EDGE('',*,*,#1336,.F.);
#1382=EDGE_LOOP('',(#1377,#1379,#1380,#1381));
#1383=FACE_OUTER_BOUND('',#1382,.F.);
#1384=ADVANCED_FACE('',(#1383),#1376,.F.);
#1385=CARTESIAN_POINT('',(-5.E-1,-1.4E1,2.5E1));
#1386=DIRECTION('',(1.E0,0.E0,0.E0));
#1387=DIRECTION('',(0.E0,-1.E0,0.E0));
#1388=AXIS2_PLACEMENT_3D('',#1385,#1386,#1387);
#1389=CYLINDRICAL_SURFACE('',#1388,3.3E0);
#1390=ORIENTED_EDGE('',*,*,#910,.T.);
#1392=ORIENTED_EDGE('',*,*,#1391,.T.);
#1393=ORIENTED_EDGE('',*,*,#1378,.F.);
#1395=ORIENTED_EDGE('',*,*,#1394,.F.);
#1396=EDGE_LOOP('',(#1390,#1392,#1393,#1395));
#1397=FACE_OUTER_BOUND('',#1396,.F.);
#1398=ADVANCED_FACE('',(#1397),#1389,.F.);
#1399=CARTESIAN_POINT('',(-5.E-1,-1.4E1,2.5E1));
#1400=DIRECTION('',(1.E0,0.E0,0.E0));
#1401=DIRECTION('',(0.E0,-1.E0,0.E0));
#1402=AXIS2_PLACEMENT_3D('',#1399,#1400,#1401);
#1403=CYLINDRICAL_SURFACE('',#1402,3.3E0);
#1404=ORIENTED_EDGE('',*,*,#912,.T.);
#1405=ORIENTED_EDGE('',*,*,#1394,.T.);
#1406=ORIENTED_EDGE('',*,*,#1367,.T.);
#1407=ORIENTED_EDGE('',*,*,#1391,.F.);
#1408=EDGE_LOOP('',(#1404,#1405,#1406,#1407));
#1409=FACE_OUTER_BOUND('',#1408,.F.);
#1410=ADVANCED_FACE('',(#1409),#1403,.F.);
#1411=CARTESIAN_POINT('',(0.E0,2.05E1,3.E1));
#1412=DIRECTION('',(0.E0,-1.E0,0.E0));
#1413=DIRECTION('',(0.E0,0.E0,-1.E0));
#1414=AXIS2_PLACEMENT_3D('',#1411,#1412,#1413);
#1415=PLANE('',#1414);
#1416=ORIENTED_EDGE('',*,*,#916,.T.);
#1418=ORIENTED_EDGE('',*,*,#1417,.T.);
#1420=ORIENTED_EDGE('',*,*,#1419,.F.);
#1422=ORIENTED_EDGE('',*,*,#1421,.F.);
#1423=EDGE_LOOP('',(#1416,#1418,#1420,#1422));
#1424=FACE_OUTER_BOUND('',#1423,.F.);
#1425=ADVANCED_FACE('',(#1424),#1415,.T.);
#1426=CARTESIAN_POINT('',(0.E0,2.05E1,2.E1));
#1427=DIRECTION('',(0.E0,0.E0,-1.E0));
#1428=DIRECTION('',(0.E0,1.E0,0.E0));
#1429=AXIS2_PLACEMENT_3D('',#1426,#1427,#1428);
#1430=PLANE('',#1429);
#1431=ORIENTED_EDGE('',*,*,#922,.T.);
#1433=ORIENTED_EDGE('',*,*,#1432,.T.);
#1435=ORIENTED_EDGE('',*,*,#1434,.F.);
#1436=ORIENTED_EDGE('',*,*,#1417,.F.);
#1437=EDGE_LOOP('',(#1431,#1433,#1435,#1436));
#1438=FACE_OUTER_BOUND('',#1437,.F.);
#1439=ADVANCED_FACE('',(#1438),#1430,.T.);
#1440=CARTESIAN_POINT('',(0.E0,2.15E1,2.E1));
#1441=DIRECTION('',(0.E0,1.E0,0.E0));
#1442=DIRECTION('',(0.E0,0.E0,1.E0));
#1443=AXIS2_PLACEMENT_3D('',#1440,#1441,#1442);
#1444=PLANE('',#1443);
#1445=ORIENTED_EDGE('',*,*,#920,.T.);
#1447=ORIENTED_EDGE('',*,*,#1446,.T.);
#1449=ORIENTED_EDGE('',*,*,#1448,.F.);
#1450=ORIENTED_EDGE('',*,*,#1432,.F.);
#1451=EDGE_LOOP('',(#1445,#1447,#1449,#1450));
#1452=FACE_OUTER_BOUND('',#1451,.F.);
#1453=ADVANCED_FACE('',(#1452),#1444,.T.);
#1454=CARTESIAN_POINT('',(0.E0,2.15E1,3.E1));
#1455=DIRECTION('',(0.E0,0.E0,1.E0));
#1456=DIRECTION('',(0.E0,-1.E0,0.E0));
#1457=AXIS2_PLACEMENT_3D('',#1454,#1455,#1456);
#1458=PLANE('',#1457);
#1459=ORIENTED_EDGE('',*,*,#918,.T.);
#1460=ORIENTED_EDGE('',*,*,#1421,.T.);
#1462=ORIENTED_EDGE('',*,*,#1461,.F.);
#1463=ORIENTED_EDGE('',*,*,#1446,.F.);
#1464=EDGE_LOOP('',(#1459,#1460,#1462,#1463));
#1465=FACE_OUTER_BOUND('',#1464,.F.);
#1466=ADVANCED_FACE('',(#1465),#1458,.T.);
#1467=CARTESIAN_POINT('',(-3.E0,0.E0,0.E0));
#1468=DIRECTION('',(1.E0,0.E0,0.E0));
#1469=DIRECTION('',(0.E0,0.E0,-1.E0));
#1470=AXIS2_PLACEMENT_3D('',#1467,#1468,#1469);
#1471=PLANE('',#1470);
#1472=ORIENTED_EDGE('',*,*,#1419,.T.);
#1473=ORIENTED_EDGE('',*,*,#1434,.T.);
#1474=ORIENTED_EDGE('',*,*,#1448,.T.);
#1475=ORIENTED_EDGE('',*,*,#1461,.T.);
#1476=EDGE_LOOP('',(#1472,#1473,#1474,#1475));
#1477=FACE_OUTER_BOUND('',#1476,.F.);
#1478=ADVANCED_FACE('',(#1477),#1471,.F.);
#1479=CARTESIAN_POINT('',(0.E0,-2.05E1,3.E1));
#1480=DIRECTION('',(0.E0,0.E0,1.E0));
#1481=DIRECTION('',(0.E0,-1.E0,0.E0));
#1482=AXIS2_PLACEMENT_3D('',#1479,#1480,#1481);
#1483=PLANE('',#1482);
#1484=ORIENTED_EDGE('',*,*,#926,.T.);
#1486=ORIENTED_EDGE('',*,*,#1485,.T.);
#1488=ORIENTED_EDGE('',*,*,#1487,.F.);
#1490=ORIENTED_EDGE('',*,*,#1489,.F.);
#1491=EDGE_LOOP('',(#1484,#1486,#1488,#1490));
#1492=FACE_OUTER_BOUND('',#1491,.F.);
#1493=ADVANCED_FACE('',(#1492),#1483,.T.);
#1494=CARTESIAN_POINT('',(0.E0,-2.15E1,3.E1));
#1495=DIRECTION('',(0.E0,-1.E0,0.E0));
#1496=DIRECTION('',(0.E0,0.E0,-1.E0));
#1497=AXIS2_PLACEMENT_3D('',#1494,#1495,#1496);
#1498=PLANE('',#1497);
#1499=ORIENTED_EDGE('',*,*,#932,.T.);
#1501=ORIENTED_EDGE('',*,*,#1500,.T.);
#1503=ORIENTED_EDGE('',*,*,#1502,.F.);
#1504=ORIENTED_EDGE('',*,*,#1485,.F.);
#1505=EDGE_LOOP('',(#1499,#1501,#1503,#1504));
#1506=FACE_OUTER_BOUND('',#1505,.F.);
#1507=ADVANCED_FACE('',(#1506),#1498,.T.);
#1508=CARTESIAN_POINT('',(0.E0,-2.15E1,2.E1));
#1509=DIRECTION('',(0.E0,0.E0,-1.E0));
#1510=DIRECTION('',(0.E0,1.E0,0.E0));
#1511=AXIS2_PLACEMENT_3D('',#1508,#1509,#1510);
#1512=PLANE('',#1511);
#1513=ORIENTED_EDGE('',*,*,#930,.T.);
#1515=ORIENTED_EDGE('',*,*,#1514,.T.);
#1517=ORIENTED_EDGE('',*,*,#1516,.F.);
#1518=ORIENTED_EDGE('',*,*,#1500,.F.);
#1519=EDGE_LOOP('',(#1513,#1515,#1517,#1518));
#1520=FACE_OUTER_BOUND('',#1519,.F.);
#1521=ADVANCED_FACE('',(#1520),#1512,.T.);
#1522=CARTESIAN_POINT('',(0.E0,-2.05E1,2.E1));
#1523=DIRECTION('',(0.E0,1.E0,0.E0));
#1524=DIRECTION('',(0.E0,0.E0,1.E0));
#1525=AXIS2_PLACEMENT_3D('',#1522,#1523,#1524);
#1526=PLANE('',#1525);
#1527=ORIENTED_EDGE('',*,*,#928,.T.);
#1528=ORIENTED_EDGE('',*,*,#1489,.T.);
#1530=ORIENTED_EDGE('',*,*,#1529,.F.);
#1531=ORIENTED_EDGE('',*,*,#1514,.F.);
#1532=EDGE_LOOP('',(#1527,#1528,#1530,#1531));
#1533=FACE_OUTER_BOUND('',#1532,.F.);
#1534=ADVANCED_FACE('',(#1533),#1526,.T.);
#1535=CARTESIAN_POINT('',(-3.E0,0.E0,0.E0));
#1536=DIRECTION('',(1.E0,0.E0,0.E0));
#1537=DIRECTION('',(0.E0,0.E0,-1.E0));
#1538=AXIS2_PLACEMENT_3D('',#1535,#1536,#1537);
#1539=PLANE('',#1538);
#1540=ORIENTED_EDGE('',*,*,#1487,.T.);
#1541=ORIENTED_EDGE('',*,*,#1502,.T.);
#1542=ORIENTED_EDGE('',*,*,#1516,.T.);
#1543=ORIENTED_EDGE('',*,*,#1529,.T.);
#1544=EDGE_LOOP('',(#1540,#1541,#1542,#1543));
#1545=FACE_OUTER_BOUND('',#1544,.F.);
#1546=ADVANCED_FACE('',(#1545),#1539,.F.);
#1547=CLOSED_SHELL('',(#789,#806,#828,#844,#862,#876,#936,#951,#964,#979,#992,
#1009,#1044,#1068,#1081,#1104,#1118,#1134,#1148,#1162,#1175,#1188,#1208,#1223,
#1237,#1258,#1276,#1289,#1302,#1314,#1326,#1342,#1356,#1371,#1384,#1398,#1410,
#1425,#1439,#1453,#1466,#1478,#1493,#1507,#1521,#1534,#1546));
#1548=MANIFOLD_SOLID_BREP('',#1547);
#1549=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1550=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1551=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1552=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1551);
#1553=(CONVERSION_BASED_UNIT('DEGREE',#1552)NAMED_UNIT(#1550)PLANE_ANGLE_UNIT(
));
#1554=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1555=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.219523930389E-3),#1549,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1556=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1555))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1549,#1553,#1554))REPRESENTATION_CONTEXT(
'ID1','3'));
#1557=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1558=DIRECTION('',(0.E0,0.E0,1.E0));
#1559=DIRECTION('',(1.E0,0.E0,0.E0));
#1562=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1563=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#1562);
#1564=DESIGN_CONTEXT('',#1562,'design');
#1565=MECHANICAL_CONTEXT('',#1562,'mechanical');
#1566=PRODUCT('12105_TECAJ_PA_45X45_A','12105_TECAJ_PA_45X45_A','NOT SPECIFIED',
(#1565));
#1567=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1566,.MADE.);
#1576=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1577=DIRECTION('',(0.E0,0.E0,1.E0));
#1578=DIRECTION('',(1.E0,0.E0,0.E0));
#1579=AXIS2_PLACEMENT_3D('',#1576,#1577,#1578);
#1580=ITEM_DEFINED_TRANSFORMATION('','',#1560,#1579);
#1581=(REPRESENTATION_RELATIONSHIP('','',#1561,#1573)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1580)SHAPE_REPRESENTATION_RELATIONSHIP());
#1582=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1581,#1575);
#1585=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1586=DIRECTION('',(0.E0,0.E0,-1.E0));
#1587=DIRECTION('',(1.E0,0.E0,0.E0));
#1588=AXIS2_PLACEMENT_3D('',#1585,#1586,#1587);
#1589=ITEM_DEFINED_TRANSFORMATION('','',#1560,#1588);
#1590=(REPRESENTATION_RELATIONSHIP('','',#1561,#1573)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1589)SHAPE_REPRESENTATION_RELATIONSHIP());
#1591=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1590,#1584);
#1593=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1594=DIRECTION('',(0.E0,1.E0,0.E0));
#1595=DIRECTION('',(1.E0,0.E0,0.E0));
#1596=AXIS2_PLACEMENT_3D('',#1593,#1594,#1595);
#1598=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1599=DIRECTION('',(0.E0,1.E0,0.E0));
#1600=DIRECTION('',(-1.E0,0.E0,0.E0));
#1601=AXIS2_PLACEMENT_3D('',#1598,#1599,#1600);
#1603=DIRECTION('',(0.E0,1.E0,0.E0));
#1604=VECTOR('',#1603,4.8E1);
#1605=CARTESIAN_POINT('',(3.E0,-2.4E1,0.E0));
#1606=LINE('',#1605,#1604);
#1607=DIRECTION('',(0.E0,1.E0,0.E0));
#1608=VECTOR('',#1607,4.8E1);
#1609=CARTESIAN_POINT('',(-3.E0,-2.4E1,0.E0));
#1610=LINE('',#1609,#1608);
#1611=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1612=DIRECTION('',(0.E0,1.E0,0.E0));
#1613=DIRECTION('',(1.E0,0.E0,0.E0));
#1614=AXIS2_PLACEMENT_3D('',#1611,#1612,#1613);
#1616=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1617=DIRECTION('',(0.E0,1.E0,0.E0));
#1618=DIRECTION('',(-1.E0,0.E0,0.E0));
#1619=AXIS2_PLACEMENT_3D('',#1616,#1617,#1618);
#1621=CARTESIAN_POINT('',(3.E0,-2.4E1,0.E0));
#1622=CARTESIAN_POINT('',(-3.E0,-2.4E1,0.E0));
#1623=VERTEX_POINT('',#1621);
#1624=VERTEX_POINT('',#1622);
#1625=CARTESIAN_POINT('',(3.E0,2.4E1,0.E0));
#1626=CARTESIAN_POINT('',(-3.E0,2.4E1,0.E0));
#1627=VERTEX_POINT('',#1625);
#1628=VERTEX_POINT('',#1626);
#1629=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1630=DIRECTION('',(0.E0,1.E0,0.E0));
#1631=DIRECTION('',(1.E0,0.E0,0.E0));
#1632=AXIS2_PLACEMENT_3D('',#1629,#1630,#1631);
#1633=PLANE('',#1632);
#1635=ORIENTED_EDGE('',*,*,#1634,.T.);
#1637=ORIENTED_EDGE('',*,*,#1636,.T.);
#1638=EDGE_LOOP('',(#1635,#1637));
#1639=FACE_OUTER_BOUND('',#1638,.F.);
#1640=ADVANCED_FACE('',(#1639),#1633,.F.);
#1641=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1642=DIRECTION('',(0.E0,1.E0,0.E0));
#1643=DIRECTION('',(1.E0,0.E0,0.E0));
#1644=AXIS2_PLACEMENT_3D('',#1641,#1642,#1643);
#1645=CYLINDRICAL_SURFACE('',#1644,3.E0);
#1646=ORIENTED_EDGE('',*,*,#1634,.F.);
#1648=ORIENTED_EDGE('',*,*,#1647,.T.);
#1650=ORIENTED_EDGE('',*,*,#1649,.T.);
#1652=ORIENTED_EDGE('',*,*,#1651,.F.);
#1653=EDGE_LOOP('',(#1646,#1648,#1650,#1652));
#1654=FACE_OUTER_BOUND('',#1653,.F.);
#1655=ADVANCED_FACE('',(#1654),#1645,.T.);
#1656=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1657=DIRECTION('',(0.E0,1.E0,0.E0));
#1658=DIRECTION('',(1.E0,0.E0,0.E0));
#1659=AXIS2_PLACEMENT_3D('',#1656,#1657,#1658);
#1660=CYLINDRICAL_SURFACE('',#1659,3.E0);
#1661=ORIENTED_EDGE('',*,*,#1636,.F.);
#1662=ORIENTED_EDGE('',*,*,#1651,.T.);
#1664=ORIENTED_EDGE('',*,*,#1663,.T.);
#1665=ORIENTED_EDGE('',*,*,#1647,.F.);
#1666=EDGE_LOOP('',(#1661,#1662,#1664,#1665));
#1667=FACE_OUTER_BOUND('',#1666,.F.);
#1668=ADVANCED_FACE('',(#1667),#1660,.T.);
#1669=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1670=DIRECTION('',(0.E0,1.E0,0.E0));
#1671=DIRECTION('',(1.E0,0.E0,0.E0));
#1672=AXIS2_PLACEMENT_3D('',#1669,#1670,#1671);
#1673=PLANE('',#1672);
#1674=ORIENTED_EDGE('',*,*,#1649,.F.);
#1675=ORIENTED_EDGE('',*,*,#1663,.F.);
#1676=EDGE_LOOP('',(#1674,#1675));
#1677=FACE_OUTER_BOUND('',#1676,.F.);
#1678=ADVANCED_FACE('',(#1677),#1673,.T.);
#1679=CLOSED_SHELL('',(#1640,#1655,#1668,#1678));
#1680=MANIFOLD_SOLID_BREP('',#1679);
#1681=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1682=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1683=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1684=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1683);
#1685=(CONVERSION_BASED_UNIT('DEGREE',#1684)NAMED_UNIT(#1682)PLANE_ANGLE_UNIT(
));
#1686=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1687=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.874288917092E-3),#1681,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1688=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1687))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1681,#1685,#1686))REPRESENTATION_CONTEXT(
'ID2','3'));
#1689=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1690=DIRECTION('',(0.E0,0.E0,1.E0));
#1691=DIRECTION('',(1.E0,0.E0,0.E0));
#1694=MECHANICAL_CONTEXT('',#1562,'mechanical');
#1695=PRODUCT('12105_TECAJ_PA_45X45_B','12105_TECAJ_PA_45X45_B','NOT SPECIFIED',
(#1694));
#1696=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1695,.MADE.);
#1702=CARTESIAN_POINT('',(8.9E0,0.E0,0.E0));
#1703=DIRECTION('',(0.E0,0.E0,-1.E0));
#1704=DIRECTION('',(1.E0,0.E0,0.E0));
#1705=AXIS2_PLACEMENT_3D('',#1702,#1703,#1704);
#1706=ITEM_DEFINED_TRANSFORMATION('','',#1692,#1705);
#1707=(REPRESENTATION_RELATIONSHIP('','',#1693,#1573)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1706)SHAPE_REPRESENTATION_RELATIONSHIP());
#1708=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1707,#1701);
#1709=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1710=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1711=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1712=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1711);
#1713=(CONVERSION_BASED_UNIT('DEGREE',#1712)NAMED_UNIT(#1710)PLANE_ANGLE_UNIT(
));
#1714=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1715=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.011413312885E-2),#1709,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1716=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1715))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1709,#1713,#1714))REPRESENTATION_CONTEXT(
'ID3','3'));
#1717=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1718=DIRECTION('',(0.E0,0.E0,1.E0));
#1719=DIRECTION('',(1.E0,0.E0,0.E0));
#1721=DESIGN_CONTEXT('',#1562,'design');
#1722=MECHANICAL_CONTEXT('',#1562,'mechanical');
#1723=PRODUCT('12105_TECAJ_PA_45X45_ASM','12105_TECAJ_PA_45X45_ASM',
'NOT SPECIFIED',(#1722));
#1724=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1723,.MADE.);
#1726=PRODUCT_CATEGORY('part','');
#1727=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#1723));
#1728=PRODUCT_CATEGORY_RELATIONSHIP('','',#1726,#1727);
#1729=PRODUCT_CATEGORY('part','');
#1730=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#1566,#1695));
#1731=PRODUCT_CATEGORY_RELATIONSHIP('','',#1729,#1730);
#1732=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#1733=SECURITY_CLASSIFICATION('','',#1732);
#1734=CC_DESIGN_SECURITY_CLASSIFICATION(#1733,(#1567,#1696,#1724,#1574,#1583,
#1700));
#1735=APPROVAL_STATUS('approved');
#1736=APPROVAL(#1735,'');
#1737=CC_DESIGN_APPROVAL(#1736,(#1733,#1567,#1696,#1724,#1568,#1697,#1725));
#1738=CALENDAR_DATE(108,22,9);
#1739=COORDINATED_UNIVERSAL_TIME_OFFSET(3,0,.AHEAD.);
#1740=LOCAL_TIME(7,28,2.5E1,#1739);
#1741=DATE_AND_TIME(#1738,#1740);
#1742=APPROVAL_DATE_TIME(#1741,#1736);
#1743=DATE_TIME_ROLE('creation_date');
#1744=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1741,#1743,(#1568,#1697,#1725));
#1745=DATE_TIME_ROLE('classification_date');
#1746=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1741,#1745,(#1733));
#1747=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#1748=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#1749=PERSON_AND_ORGANIZATION(#1747,#1748);
#1750=APPROVAL_ROLE('approver');
#1751=APPROVAL_PERSON_ORGANIZATION(#1749,#1736,#1750);
#1752=PERSON_AND_ORGANIZATION_ROLE('creator');
#1753=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1749,#1752,(#1567,#1696,
#1724,#1568,#1697,#1725));
#1754=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#1755=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1749,#1754,(#1567,#1696,
#1724));
#1756=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#1757=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1749,#1756,(#1733));
#1758=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#1759=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1749,#1758,(#1723,#1566,
#1695));
#23=B_SPLINE_CURVE_WITH_KNOTS('',3,(#14,#15,#16,#17,#18,#19,#20,#21,#22),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,5.E-1,7.5E-1,8.75E-1,
1.E0),.UNSPECIFIED.);
#35=B_SPLINE_CURVE_WITH_KNOTS('',3,(#24,#25,#26,#27,#28,#29,#30,#31,#32,#33,
#34),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,3.75E-1,
5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#43=B_SPLINE_CURVE_WITH_KNOTS('',3,(#36,#37,#38,#39,#40,#41,#42),.UNSPECIFIED.,
.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),.UNSPECIFIED.);
#54=B_SPLINE_CURVE_WITH_KNOTS('',3,(#44,#45,#46,#47,#48,#49,#50,#51,#52,#53),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,4),(0.E0,1.428571428571E-1,
2.857142857143E-1,4.285714285714E-1,5.714285714286E-1,7.142857142857E-1,
8.571428571429E-1,1.E0),.UNSPECIFIED.);
#66=B_SPLINE_CURVE_WITH_KNOTS('',3,(#55,#56,#57,#58,#59,#60,#61,#62,#63,#64,
#65),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,3.75E-1,
5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#76=B_SPLINE_CURVE_WITH_KNOTS('',3,(#67,#68,#69,#70,#71,#72,#73,#74,#75),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#81=CIRCLE('',#80,9.999999999999E1);
#90=CIRCLE('',#89,3.3E0);
#95=CIRCLE('',#94,3.3E0);
#100=CIRCLE('',#99,3.3E0);
#105=CIRCLE('',#104,3.3E0);
#130=CIRCLE('',#129,5.999999999998E0);
#135=CIRCLE('',#134,9.999999999999E1);
#140=CIRCLE('',#139,5.999999999998E0);
#193=CIRCLE('',#192,3.3E0);
#202=CIRCLE('',#201,3.3E0);
#219=CIRCLE('',#218,6.5E0);
#224=CIRCLE('',#223,6.5E0);
#249=CIRCLE('',#248,6.5E0);
#254=CIRCLE('',#253,6.5E0);
#263=CIRCLE('',#262,9.85E1);
#272=CIRCLE('',#271,6.5E0);
#277=CIRCLE('',#276,6.5E0);
#302=CIRCLE('',#301,3.E0);
#307=CIRCLE('',#306,3.E0);
#316=CIRCLE('',#315,3.E0);
#321=CIRCLE('',#320,3.E0);
#338=CIRCLE('',#337,7.E0);
#343=CIRCLE('',#342,7.E0);
#352=CIRCLE('',#351,7.E0);
#385=CIRCLE('',#384,3.E0);
#390=CIRCLE('',#389,3.E0);
#407=CIRCLE('',#406,7.E0);
#424=CIRCLE('',#423,3.E0);
#429=CIRCLE('',#428,3.E0);
#434=CIRCLE('',#433,4.E0);
#446=B_SPLINE_CURVE_WITH_KNOTS('',3,(#435,#436,#437,#438,#439,#440,#441,#442,
#443,#444,#445),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,
3.75E-1,5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#457=B_SPLINE_CURVE_WITH_KNOTS('',3,(#447,#448,#449,#450,#451,#452,#453,#454,
#455,#456),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,4),(0.E0,1.428571428571E-1,
2.857142857143E-1,4.285714285714E-1,5.714285714286E-1,7.142857142857E-1,
8.571428571429E-1,1.E0),.UNSPECIFIED.);
#465=B_SPLINE_CURVE_WITH_KNOTS('',3,(#458,#459,#460,#461,#462,#463,#464),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#477=B_SPLINE_CURVE_WITH_KNOTS('',3,(#466,#467,#468,#469,#470,#471,#472,#473,
#474,#475,#476),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,
3.75E-1,5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#495=B_SPLINE_CURVE_WITH_KNOTS('',3,(#486,#487,#488,#489,#490,#491,#492,#493,
#494),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#512=CIRCLE('',#511,6.5E0);
#521=CIRCLE('',#520,6.5E0);
#538=CIRCLE('',#537,3.3E0);
#543=CIRCLE('',#542,3.3E0);
#779=EDGE_CURVE('',#686,#687,#5,.T.);
#781=EDGE_CURVE('',#618,#687,#144,.T.);
#783=EDGE_CURVE('',#618,#619,#9,.T.);
#785=EDGE_CURVE('',#686,#619,#13,.T.);
#796=EDGE_CURVE('',#686,#693,#23,.T.);
#798=EDGE_CURVE('',#693,#691,#240,.T.);
#800=EDGE_CURVE('',#697,#691,#380,.T.);
#802=EDGE_CURVE('',#687,#697,#148,.T.);
#814=EDGE_CURVE('',#633,#619,#35,.T.);
#816=EDGE_CURVE('',#631,#633,#43,.T.);
#818=EDGE_CURVE('',#668,#631,#258,.T.);
#820=EDGE_CURVE('',#673,#668,#54,.T.);
#822=EDGE_CURVE('',#665,#673,#66,.T.);
#824=EDGE_CURVE('',#693,#665,#244,.T.);
#834=EDGE_CURVE('',#633,#635,#76,.T.);
#838=EDGE_CURVE('',#627,#618,#140,.T.);
#840=EDGE_CURVE('',#627,#635,#85,.T.);
#852=EDGE_CURVE('',#634,#635,#81,.T.);
#854=EDGE_CURVE('',#634,#632,#495,.T.);
#856=EDGE_CURVE('',#632,#630,#465,.T.);
#858=EDGE_CURVE('',#630,#631,#263,.T.);
#870=EDGE_CURVE('',#625,#627,#135,.T.);
#872=EDGE_CURVE('',#625,#634,#499,.T.);
#882=EDGE_CURVE('',#712,#713,#109,.T.);
#884=EDGE_CURVE('',#713,#717,#113,.T.);
#886=EDGE_CURVE('',#716,#717,#117,.T.);
#888=EDGE_CURVE('',#716,#679,#121,.T.);
#890=EDGE_CURVE('',#679,#622,#125,.T.);
#892=EDGE_CURVE('',#622,#625,#130,.T.);
#898=EDGE_CURVE('',#696,#697,#152,.T.);
#900=EDGE_CURVE('',#696,#712,#156,.T.);
#904=EDGE_CURVE('',#652,#653,#90,.T.);
#906=EDGE_CURVE('',#653,#652,#95,.T.);
#910=EDGE_CURVE('',#671,#672,#100,.T.);
#912=EDGE_CURVE('',#672,#671,#105,.T.);
#916=EDGE_CURVE('',#752,#753,#160,.T.);
#918=EDGE_CURVE('',#757,#752,#164,.T.);
#920=EDGE_CURVE('',#755,#757,#168,.T.);
#922=EDGE_CURVE('',#753,#755,#172,.T.);
#926=EDGE_CURVE('',#768,#769,#176,.T.);
#928=EDGE_CURVE('',#773,#768,#180,.T.);
#930=EDGE_CURVE('',#771,#773,#184,.T.);
#932=EDGE_CURVE('',#769,#771,#188,.T.);
#943=EDGE_CURVE('',#639,#652,#206,.T.);
#945=EDGE_CURVE('',#639,#643,#193,.T.);
#947=EDGE_CURVE('',#643,#653,#197,.T.);
#959=EDGE_CURVE('',#639,#643,#202,.T.);
#970=EDGE_CURVE('',#638,#639,#210,.T.);
#973=EDGE_CURVE('',#642,#643,#214,.T.);
#975=EDGE_CURVE('',#638,#642,#219,.T.);
#986=EDGE_CURVE('',#638,#642,#224,.T.);
#998=EDGE_CURVE('',#646,#647,#277,.T.);
#1000=EDGE_CURVE('',#647,#642,#485,.T.);
#1003=EDGE_CURVE('',#654,#638,#481,.T.);
#1005=EDGE_CURVE('',#654,#646,#446,.T.);
#1015=EDGE_CURVE('',#704,#705,#228,.T.);
#1017=EDGE_CURVE('',#690,#704,#232,.T.);
#1019=EDGE_CURVE('',#690,#691,#236,.T.);
#1023=EDGE_CURVE('',#665,#666,#249,.T.);
#1025=EDGE_CURVE('',#666,#668,#254,.T.);
#1029=EDGE_CURVE('',#649,#630,#267,.T.);
#1031=EDGE_CURVE('',#647,#649,#272,.T.);
#1034=EDGE_CURVE('',#682,#646,#281,.T.);
#1036=EDGE_CURVE('',#708,#682,#285,.T.);
#1038=EDGE_CURVE('',#708,#709,#289,.T.);
#1040=EDGE_CURVE('',#705,#709,#293,.T.);
#1051=EDGE_CURVE('',#713,#705,#297,.T.);
#1054=EDGE_CURVE('',#723,#712,#360,.T.);
#1056=EDGE_CURVE('',#719,#723,#338,.T.);
#1058=EDGE_CURVE('',#704,#719,#325,.T.);
#1062=EDGE_CURVE('',#736,#737,#302,.T.);
#1064=EDGE_CURVE('',#737,#736,#307,.T.);
#1075=EDGE_CURVE('',#717,#709,#311,.T.);
#1088=EDGE_CURVE('',#708,#721,#333,.T.);
#1090=EDGE_CURVE('',#721,#725,#352,.T.);
#1092=EDGE_CURVE('',#725,#716,#372,.T.);
#1098=EDGE_CURVE('',#740,#741,#316,.T.);
#1100=EDGE_CURVE('',#741,#740,#321,.T.);
#1111=EDGE_CURVE('',#699,#719,#347,.T.);
#1113=EDGE_CURVE('',#690,#699,#329,.T.);
#1126=EDGE_CURVE('',#682,#683,#434,.T.);
#1128=EDGE_CURVE('',#683,#676,#411,.T.);
#1130=EDGE_CURVE('',#721,#676,#356,.T.);
#1141=EDGE_CURVE('',#701,#723,#368,.T.);
#1143=EDGE_CURVE('',#699,#701,#343,.T.);
#1156=EDGE_CURVE('',#676,#677,#407,.T.);
#1158=EDGE_CURVE('',#725,#677,#376,.T.);
#1170=EDGE_CURVE('',#701,#696,#364,.T.);
#1183=EDGE_CURVE('',#677,#679,#402,.T.);
#1202=EDGE_CURVE('',#732,#733,#385,.T.);
#1204=EDGE_CURVE('',#733,#732,#390,.T.);
#1214=EDGE_CURVE('',#728,#729,#424,.T.);
#1216=EDGE_CURVE('',#740,#728,#394,.T.);
#1219=EDGE_CURVE('',#741,#729,#503,.T.);
#1230=EDGE_CURVE('',#733,#737,#507,.T.);
#1233=EDGE_CURVE('',#732,#736,#398,.T.);
#1247=EDGE_CURVE('',#683,#623,#415,.T.);
#1249=EDGE_CURVE('',#622,#623,#419,.T.);
#1254=EDGE_CURVE('',#729,#728,#429,.T.);
#1267=EDGE_CURVE('',#649,#654,#457,.T.);
#1271=EDGE_CURVE('',#623,#632,#477,.T.);
#1334=EDGE_CURVE('',#658,#673,#525,.T.);
#1336=EDGE_CURVE('',#658,#662,#512,.T.);
#1338=EDGE_CURVE('',#662,#666,#516,.T.);
#1350=EDGE_CURVE('',#658,#662,#521,.T.);
#1362=EDGE_CURVE('',#657,#658,#529,.T.);
#1365=EDGE_CURVE('',#661,#662,#533,.T.);
#1367=EDGE_CURVE('',#657,#661,#538,.T.);
#1378=EDGE_CURVE('',#657,#661,#543,.T.);
#1391=EDGE_CURVE('',#672,#661,#551,.T.);
#1394=EDGE_CURVE('',#671,#657,#547,.T.);
#1417=EDGE_CURVE('',#753,#745,#559,.T.);
#1419=EDGE_CURVE('',#744,#745,#571,.T.);
#1421=EDGE_CURVE('',#752,#744,#555,.T.);
#1432=EDGE_CURVE('',#755,#747,#563,.T.);
#1434=EDGE_CURVE('',#745,#747,#575,.T.);
#1446=EDGE_CURVE('',#757,#749,#567,.T.);
#1448=EDGE_CURVE('',#747,#749,#579,.T.);
#1461=EDGE_CURVE('',#749,#744,#583,.T.);
#1485=EDGE_CURVE('',#769,#761,#591,.T.);
#1487=EDGE_CURVE('',#760,#761,#603,.T.);
#1489=EDGE_CURVE('',#768,#760,#587,.T.);
#1500=EDGE_CURVE('',#771,#763,#595,.T.);
#1502=EDGE_CURVE('',#761,#763,#607,.T.);
#1514=EDGE_CURVE('',#773,#765,#599,.T.);
#1516=EDGE_CURVE('',#763,#765,#611,.T.);
#1529=EDGE_CURVE('',#765,#760,#615,.T.);
#1560=AXIS2_PLACEMENT_3D('',#1557,#1558,#1559);
#1561=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1560,#1548),#1556);
#1568=PRODUCT_DEFINITION('design','',#1567,#1564);
#1569=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 12105_TECAJ_PA_45X45_A.',#1568);
#1570=SHAPE_DEFINITION_REPRESENTATION(#1569,#1561);
#1571=SHAPE_DEFINITION_REPRESENTATION(#1572,#1573);
#1572=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 12105_TECAJ_PA_45X45_ASM.',#1725);
#1573=SHAPE_REPRESENTATION('',(#1579,#1588,#1705,#1720),#1716);
#1574=NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','Next assembly relationship',
'12105_TECAJ_PA_45X45_A',#1725,#1568,$);
#1575=PRODUCT_DEFINITION_SHAPE('Placement #9',
'Placement of 12105_TECAJ_PA_45X45_A with respect to 12105_TECAJ_PA_45X45_ASM',
#1574);
#1583=NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','Next assembly relationship',
'12105_TECAJ_PA_45X45_A',#1725,#1568,$);
#1584=PRODUCT_DEFINITION_SHAPE('Placement #10',
'Placement of 12105_TECAJ_PA_45X45_A with respect to 12105_TECAJ_PA_45X45_ASM',
#1583);
#1597=CIRCLE('',#1596,3.E0);
#1602=CIRCLE('',#1601,3.E0);
#1615=CIRCLE('',#1614,3.E0);
#1620=CIRCLE('',#1619,3.E0);
#1634=EDGE_CURVE('',#1623,#1624,#1597,.T.);
#1636=EDGE_CURVE('',#1624,#1623,#1602,.T.);
#1647=EDGE_CURVE('',#1623,#1627,#1606,.T.);
#1649=EDGE_CURVE('',#1627,#1628,#1615,.T.);
#1651=EDGE_CURVE('',#1624,#1628,#1610,.T.);
#1663=EDGE_CURVE('',#1628,#1627,#1620,.T.);
#1692=AXIS2_PLACEMENT_3D('',#1689,#1690,#1691);
#1693=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1692,#1680),#1688);
#1697=PRODUCT_DEFINITION('design','',#1696,#1564);
#1698=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 12105_TECAJ_PA_45X45_B.',#1697);
#1699=SHAPE_DEFINITION_REPRESENTATION(#1698,#1693);
#1700=NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','Next assembly relationship',
'12105_TECAJ_PA_45X45_B',#1725,#1697,$);
#1701=PRODUCT_DEFINITION_SHAPE('Placement #11',
'Placement of 12105_TECAJ_PA_45X45_B with respect to 12105_TECAJ_PA_45X45_ASM',
#1700);
#1720=AXIS2_PLACEMENT_3D('',#1717,#1718,#1719);
#1725=PRODUCT_DEFINITION('design','',#1724,#1721);
ENDSEC;
END-ISO-10303-21;