ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('12102_TECAJ_PA_30X30_ASM','2008-09-22T',('S1'),('Work d.o.o.'),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006460',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006460','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2=DIRECTION('',(-9.612616959383E-1,0.E0,-2.756373558170E-1));
#3=VECTOR('',#2,4.057167799860E0);
#4=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#5=LINE('',#4,#3);
#6=DIRECTION('',(1.E0,0.E0,0.E0));
#7=VECTOR('',#6,3.9E0);
#8=CARTESIAN_POINT('',(0.E0,-2.4E1,2.176050075737E1));
#9=LINE('',#8,#7);
#10=DIRECTION('',(0.E0,0.E0,1.E0));
#11=VECTOR('',#10,1.464219375291E1);
#12=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#13=LINE('',#12,#11);
#14=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#15=CARTESIAN_POINT('',(4.226876949323E0,-2.4E1,7.212037461389E0));
#16=CARTESIAN_POINT('',(4.807485220433E0,-2.392390664494E1,7.378524204063E0));
#17=CARTESIAN_POINT('',(5.791049844959E0,-2.358690874506E1,7.660556821741E0));
#18=CARTESIAN_POINT('',(6.767209501572E0,-2.290215755526E1,7.940466099039E0));
#19=CARTESIAN_POINT('',(7.467410990196E0,-2.193032723898E1,8.141245645003E0));
#20=CARTESIAN_POINT('',(7.818386117790E0,-2.093524684231E1,8.241886143357E0));
#21=CARTESIAN_POINT('',(7.9E0,-2.034004990598E1,8.265288547495E0));
#22=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#24=CARTESIAN_POINT('',(7.569633861544E0,-2.159178746138E1,2.656664919788E1));
#25=CARTESIAN_POINT('',(7.479325289890E0,-2.179998070361E1,2.641105977191E1));
#26=CARTESIAN_POINT('',(7.258767445149E0,-2.221017127002E1,2.606182155900E1));
#27=CARTESIAN_POINT('',(6.812533808682E0,-2.277466430126E1,2.542914566410E1));
#28=CARTESIAN_POINT('',(6.236234372394E0,-2.327870360893E1,2.466502558393E1));
#29=CARTESIAN_POINT('',(5.528550924666E0,-2.368546409371E1,2.376603763274E1));
#30=CARTESIAN_POINT('',(4.720739833818E0,-2.394460147551E1,2.276562657733E1));
#31=CARTESIAN_POINT('',(4.175156864107E0,-2.4E1,2.209749771551E1));
#32=CARTESIAN_POINT('',(3.9E0,-2.4E1,2.176050075737E1));
#34=CARTESIAN_POINT('',(7.9E0,-2.E1,2.594817261099E1));
#35=CARTESIAN_POINT('',(7.9E0,-2.013281040286E1,2.600369197068E1));
#36=CARTESIAN_POINT('',(7.886982300698E0,-2.040175053618E1,2.611571526444E1));
#37=CARTESIAN_POINT('',(7.822577736705E0,-2.082120177062E1,2.628555791429E1));
#38=CARTESIAN_POINT('',(7.714102917524E0,-2.122814544634E1,2.644137587529E1));
#39=CARTESIAN_POINT('',(7.620714482181E0,-2.147402853960E1,2.652767053004E1));
#40=CARTESIAN_POINT('',(7.569633861544E0,-2.159178746138E1,2.656664919788E1));
#42=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,1.75E1));
#43=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,1.760698150154E1));
#44=CARTESIAN_POINT('',(7.869296801267E0,-2.049472581961E1,1.782066481032E1));
#45=CARTESIAN_POINT('',(7.872214649226E0,-2.047099364750E1,1.814076367935E1));
#46=CARTESIAN_POINT('',(7.876750717622E0,-2.043150428954E1,1.845919749046E1));
#47=CARTESIAN_POINT('',(7.882420784110E0,-2.037635614395E1,1.877530322914E1));
#48=CARTESIAN_POINT('',(7.888558963527E0,-2.030568528946E1,1.908827984732E1));
#49=CARTESIAN_POINT('',(7.894329155032E0,-2.021967122751E1,1.939737115041E1));
#50=CARTESIAN_POINT('',(7.898735691663E0,-2.011847531051E1,1.970194191177E1));
#51=CARTESIAN_POINT('',(7.9E0,-2.004115151630E1,1.990123636087E1));
#52=CARTESIAN_POINT('',(7.9E0,-2.E1,2.E1));
#54=CARTESIAN_POINT('',(7.9E0,-2.E1,1.5E1));
#55=CARTESIAN_POINT('',(7.9E0,-2.003990026861E1,1.509576064467E1));
#56=CARTESIAN_POINT('',(7.898809957767E0,-2.011486401063E1,1.528860271752E1));
#57=CARTESIAN_POINT('',(7.894679687960E0,-2.021281963802E1,1.558100115329E1));
#58=CARTESIAN_POINT('',(7.889204386699E0,-2.029706949011E1,1.587856877165E1));
#59=CARTESIAN_POINT('',(7.883233216072E0,-2.036770941367E1,1.618272721200E1));
#60=CARTESIAN_POINT('',(7.877513304851E0,-2.042451236543E1,1.649501150670E1));
#61=CARTESIAN_POINT('',(7.872707002954E0,-2.046689925330E1,1.681773695412E1));
#62=CARTESIAN_POINT('',(7.869436569710E0,-2.049363027896E1,1.715159052835E1));
#63=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,1.738252195921E1));
#64=CARTESIAN_POINT('',(7.868626966597E0,-2.05E1,1.75E1));
#66=CARTESIAN_POINT('',(7.569633861544E0,-2.159178746138E1,2.656664919788E1));
#67=CARTESIAN_POINT('',(7.528524682189E0,-2.149185996250E1,2.664132819333E1));
#68=CARTESIAN_POINT('',(7.437183856922E0,-2.127902435759E1,2.679066116515E1));
#69=CARTESIAN_POINT('',(7.272270996639E0,-2.091938676801E1,2.700844575037E1));
#70=CARTESIAN_POINT('',(7.078862215760E0,-2.051643625229E1,2.721385231500E1));
#71=CARTESIAN_POINT('',(6.864274069017E0,-2.008155020814E1,2.739463995611E1));
#72=CARTESIAN_POINT('',(6.634823998977E0,-1.962187102190E1,2.754389602844E1));
#73=CARTESIAN_POINT('',(6.478636276949E0,-1.930814859853E1,2.761840658694E1));
#74=CARTESIAN_POINT('',(6.4E0,-1.914893617021E1,2.764946889081E1));
#76=CARTESIAN_POINT('',(6.4E0,3.961275751863E-13,-7.049999999999E1));
#77=DIRECTION('',(1.E0,0.E0,0.E0));
#78=DIRECTION('',(0.E0,1.914893617022E-1,9.814946889081E-1));
#79=AXIS2_PLACEMENT_3D('',#76,#77,#78);
#81=DIRECTION('',(1.E0,2.925079817251E-7,5.706825401130E-8));
#82=VECTOR('',#81,6.400000000001E0);
#83=CARTESIAN_POINT('',(0.E0,-1.914893804226E1,2.764946852558E1));
#84=LINE('',#83,#82);
#85=CARTESIAN_POINT('',(0.E0,1.4E1,1.75E1));
#86=DIRECTION('',(-1.E0,0.E0,0.E0));
#87=DIRECTION('',(0.E0,1.E0,0.E0));
#88=AXIS2_PLACEMENT_3D('',#85,#86,#87);
#90=CARTESIAN_POINT('',(0.E0,1.4E1,1.75E1));
#91=DIRECTION('',(-1.E0,0.E0,0.E0));
#92=DIRECTION('',(0.E0,-1.E0,0.E0));
#93=AXIS2_PLACEMENT_3D('',#90,#91,#92);
#95=CARTESIAN_POINT('',(0.E0,-1.4E1,1.75E1));
#96=DIRECTION('',(1.E0,0.E0,0.E0));
#97=DIRECTION('',(0.E0,-1.E0,0.E0));
#98=AXIS2_PLACEMENT_3D('',#95,#96,#97);
#100=CARTESIAN_POINT('',(0.E0,-1.4E1,1.75E1));
#101=DIRECTION('',(1.E0,0.E0,0.E0));
#102=DIRECTION('',(0.E0,1.E0,0.E0));
#103=AXIS2_PLACEMENT_3D('',#100,#101,#102);
#105=DIRECTION('',(0.E0,0.E0,1.E0));
#106=VECTOR('',#105,4.584747812637E0);
#107=CARTESIAN_POINT('',(0.E0,0.E0,1.415252187363E0));
#108=LINE('',#107,#106);
#109=DIRECTION('',(0.E0,1.E0,0.E0));
#110=VECTOR('',#109,1.2E1);
#111=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#112=LINE('',#111,#110);
#113=DIRECTION('',(0.E0,0.E0,1.E0));
#114=VECTOR('',#113,4.584747812637E0);
#115=CARTESIAN_POINT('',(0.E0,1.2E1,1.415252187363E0));
#116=LINE('',#115,#114);
#117=DIRECTION('',(0.E0,1.E0,0.E0));
#118=VECTOR('',#117,1.2E1);
#119=CARTESIAN_POINT('',(0.E0,1.2E1,1.415252187363E0));
#120=LINE('',#119,#118);
#121=DIRECTION('',(0.E0,0.E0,1.E0));
#122=VECTOR('',#121,2.034524857E1);
#123=CARTESIAN_POINT('',(0.E0,2.4E1,1.415252187363E0));
#124=LINE('',#123,#122);
#125=CARTESIAN_POINT('',(0.E0,1.8E1,2.176050075737E1));
#126=DIRECTION('',(1.E0,0.E0,0.E0));
#127=DIRECTION('',(0.E0,1.E0,0.E0));
#128=AXIS2_PLACEMENT_3D('',#125,#126,#127);
#130=CARTESIAN_POINT('',(0.E0,3.961275751863E-13,-7.049999999999E1));
#131=DIRECTION('',(1.E0,0.E0,0.E0));
#132=DIRECTION('',(0.E0,1.914893581921E-1,9.814946895930E-1));
#133=AXIS2_PLACEMENT_3D('',#130,#131,#132);
#135=CARTESIAN_POINT('',(0.E0,-1.8E1,2.176050075737E1));
#136=DIRECTION('',(1.E0,0.E0,0.E0));
#137=DIRECTION('',(0.E0,-1.914896737107E-1,9.814946280353E-1));
#138=AXIS2_PLACEMENT_3D('',#135,#136,#137);
#140=DIRECTION('',(0.E0,0.E0,-1.E0));
#141=VECTOR('',#140,1.576050075737E1);
#142=CARTESIAN_POINT('',(0.E0,-2.4E1,2.176050075737E1));
#143=LINE('',#142,#141);
#144=DIRECTION('',(0.E0,1.E0,0.E0));
#145=VECTOR('',#144,1.2E1);
#146=CARTESIAN_POINT('',(0.E0,-2.4E1,6.E0));
#147=LINE('',#146,#145);
#148=DIRECTION('',(0.E0,0.E0,1.E0));
#149=VECTOR('',#148,4.584747812637E0);
#150=CARTESIAN_POINT('',(0.E0,-1.2E1,1.415252187363E0));
#151=LINE('',#150,#149);
#152=DIRECTION('',(0.E0,1.E0,0.E0));
#153=VECTOR('',#152,1.2E1);
#154=CARTESIAN_POINT('',(0.E0,-1.2E1,1.415252187363E0));
#155=LINE('',#154,#153);
#156=DIRECTION('',(0.E0,0.E0,-1.E0));
#157=VECTOR('',#156,8.E0);
#158=CARTESIAN_POINT('',(0.E0,2.05E1,2.15E1));
#159=LINE('',#158,#157);
#160=DIRECTION('',(0.E0,-1.E0,0.E0));
#161=VECTOR('',#160,1.E0);
#162=CARTESIAN_POINT('',(0.E0,2.15E1,2.15E1));
#163=LINE('',#162,#161);
#164=DIRECTION('',(0.E0,0.E0,1.E0));
#165=VECTOR('',#164,8.E0);
#166=CARTESIAN_POINT('',(0.E0,2.15E1,1.35E1));
#167=LINE('',#166,#165);
#168=DIRECTION('',(0.E0,1.E0,0.E0));
#169=VECTOR('',#168,1.E0);
#170=CARTESIAN_POINT('',(0.E0,2.05E1,1.35E1));
#171=LINE('',#170,#169);
#172=DIRECTION('',(0.E0,-1.E0,0.E0));
#173=VECTOR('',#172,1.E0);
#174=CARTESIAN_POINT('',(0.E0,-2.05E1,2.15E1));
#175=LINE('',#174,#173);
#176=DIRECTION('',(0.E0,0.E0,1.E0));
#177=VECTOR('',#176,8.E0);
#178=CARTESIAN_POINT('',(0.E0,-2.05E1,1.35E1));
#179=LINE('',#178,#177);
#180=DIRECTION('',(0.E0,1.E0,0.E0));
#181=VECTOR('',#180,1.E0);
#182=CARTESIAN_POINT('',(0.E0,-2.15E1,1.35E1));
#183=LINE('',#182,#181);
#184=DIRECTION('',(0.E0,0.E0,-1.E0));
#185=VECTOR('',#184,8.E0);
#186=CARTESIAN_POINT('',(0.E0,-2.15E1,2.15E1));
#187=LINE('',#186,#185);
#188=CARTESIAN_POINT('',(3.3E0,1.4E1,1.75E1));
#189=DIRECTION('',(-1.E0,0.E0,0.E0));
#190=DIRECTION('',(0.E0,1.E0,0.E0));
#191=AXIS2_PLACEMENT_3D('',#188,#189,#190);
#193=DIRECTION('',(-1.E0,0.E0,0.E0));
#194=VECTOR('',#193,3.3E0);
#195=CARTESIAN_POINT('',(3.3E0,1.07E1,1.75E1));
#196=LINE('',#195,#194);
#197=CARTESIAN_POINT('',(3.3E0,1.4E1,1.75E1));
#198=DIRECTION('',(1.E0,0.E0,0.E0));
#199=DIRECTION('',(0.E0,1.E0,0.E0));
#200=AXIS2_PLACEMENT_3D('',#197,#198,#199);
#202=DIRECTION('',(-1.E0,0.E0,0.E0));
#203=VECTOR('',#202,3.3E0);
#204=CARTESIAN_POINT('',(3.3E0,1.73E1,1.75E1));
#205=LINE('',#204,#203);
#206=DIRECTION('',(-7.071067811865E-1,-7.071067811865E-1,0.E0));
#207=VECTOR('',#206,4.525483399594E0);
#208=CARTESIAN_POINT('',(6.5E0,2.05E1,1.75E1));
#209=LINE('',#208,#207);
#210=DIRECTION('',(-7.071067811865E-1,7.071067811865E-1,0.E0));
#211=VECTOR('',#210,4.525483399594E0);
#212=CARTESIAN_POINT('',(6.5E0,7.5E0,1.75E1));
#213=LINE('',#212,#211);
#214=CARTESIAN_POINT('',(6.5E0,1.4E1,1.75E1));
#215=DIRECTION('',(1.E0,0.E0,0.E0));
#216=DIRECTION('',(0.E0,1.E0,0.E0));
#217=AXIS2_PLACEMENT_3D('',#214,#215,#216);
#219=CARTESIAN_POINT('',(6.5E0,1.4E1,1.75E1));
#220=DIRECTION('',(-1.E0,0.E0,0.E0));
#221=DIRECTION('',(0.E0,1.E0,0.E0));
#222=AXIS2_PLACEMENT_3D('',#219,#220,#221);
#224=DIRECTION('',(0.E0,0.E0,1.E0));
#225=VECTOR('',#224,1.265288547495E0);
#226=CARTESIAN_POINT('',(7.9E0,0.E0,7.E0));
#227=LINE('',#226,#225);
#228=DIRECTION('',(0.E0,1.E0,0.E0));
#229=VECTOR('',#228,1.2E1);
#230=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#231=LINE('',#230,#229);
#232=DIRECTION('',(0.E0,0.E0,1.E0));
#233=VECTOR('',#232,1.265288547495E0);
#234=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#235=LINE('',#234,#233);
#236=DIRECTION('',(0.E0,1.E0,0.E0));
#237=VECTOR('',#236,8.E0);
#238=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#239=LINE('',#238,#237);
#240=DIRECTION('',(0.E0,0.E0,1.E0));
#241=VECTOR('',#240,6.734711452505E0);
#242=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#243=LINE('',#242,#241);
#244=CARTESIAN_POINT('',(7.9E0,-1.4E1,1.75E1));
#245=DIRECTION('',(1.E0,0.E0,0.E0));
#246=DIRECTION('',(0.E0,-9.230769230769E-1,-3.846153846155E-1));
#247=AXIS2_PLACEMENT_3D('',#244,#245,#246);
#249=CARTESIAN_POINT('',(7.9E0,-1.4E1,1.75E1));
#250=DIRECTION('',(1.E0,0.E0,0.E0));
#251=DIRECTION('',(0.E0,1.E0,0.E0));
#252=AXIS2_PLACEMENT_3D('',#249,#250,#251);
#254=DIRECTION('',(0.E0,0.E0,1.E0));
#255=VECTOR('',#254,5.948172610993E0);
#256=CARTESIAN_POINT('',(7.9E0,-2.E1,2.E1));
#257=LINE('',#256,#255);
#258=CARTESIAN_POINT('',(7.9E0,0.E0,-7.05E1));
#259=DIRECTION('',(1.E0,0.E0,0.E0));
#260=DIRECTION('',(0.E0,2.030456852792E-1,9.791692650862E-1));
#261=AXIS2_PLACEMENT_3D('',#258,#259,#260);
#263=DIRECTION('',(0.E0,0.E0,1.E0));
#264=VECTOR('',#263,5.948172610993E0);
#265=CARTESIAN_POINT('',(7.9E0,2.E1,2.E1));
#266=LINE('',#265,#264);
#267=CARTESIAN_POINT('',(7.9E0,1.4E1,1.75E1));
#268=DIRECTION('',(-1.E0,0.E0,0.E0));
#269=DIRECTION('',(0.E0,-1.E0,0.E0));
#270=AXIS2_PLACEMENT_3D('',#267,#268,#269);
#272=CARTESIAN_POINT('',(7.9E0,1.4E1,1.75E1));
#273=DIRECTION('',(-1.E0,0.E0,0.E0));
#274=DIRECTION('',(0.E0,9.230769230769E-1,-3.846153846155E-1));
#275=AXIS2_PLACEMENT_3D('',#272,#273,#274);
#277=DIRECTION('',(0.E0,0.E0,1.E0));
#278=VECTOR('',#277,7.999999999999E0);
#279=CARTESIAN_POINT('',(7.9E0,2.E1,7.E0));
#280=LINE('',#279,#278);
#281=DIRECTION('',(0.E0,1.E0,0.E0));
#282=VECTOR('',#281,8.E0);
#283=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#284=LINE('',#283,#282);
#285=DIRECTION('',(0.E0,0.E0,1.E0));
#286=VECTOR('',#285,1.265288547495E0);
#287=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#288=LINE('',#287,#286);
#289=DIRECTION('',(0.E0,1.E0,0.E0));
#290=VECTOR('',#289,1.2E1);
#291=CARTESIAN_POINT('',(7.9E0,0.E0,8.265288547495E0));
#292=LINE('',#291,#290);
#293=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#294=VECTOR('',#293,8.218365543307E0);
#295=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#296=LINE('',#295,#294);
#297=CARTESIAN_POINT('',(8.9E0,0.E0,0.E0));
#298=DIRECTION('',(0.E0,1.E0,0.E0));
#299=DIRECTION('',(1.E0,0.E0,0.E0));
#300=AXIS2_PLACEMENT_3D('',#297,#298,#299);
#302=CARTESIAN_POINT('',(8.9E0,0.E0,0.E0));
#303=DIRECTION('',(0.E0,1.E0,0.E0));
#304=DIRECTION('',(-1.E0,0.E0,0.E0));
#305=AXIS2_PLACEMENT_3D('',#302,#303,#304);
#307=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#308=VECTOR('',#307,8.218365543307E0);
#309=CARTESIAN_POINT('',(0.E0,1.2E1,6.E0));
#310=LINE('',#309,#308);
#311=CARTESIAN_POINT('',(8.9E0,1.2E1,0.E0));
#312=DIRECTION('',(0.E0,1.E0,0.E0));
#313=DIRECTION('',(1.E0,0.E0,0.E0));
#314=AXIS2_PLACEMENT_3D('',#311,#312,#313);
#316=CARTESIAN_POINT('',(8.9E0,1.2E1,0.E0));
#317=DIRECTION('',(0.E0,1.E0,0.E0));
#318=DIRECTION('',(-1.E0,0.E0,0.E0));
#319=AXIS2_PLACEMENT_3D('',#316,#317,#318);
#321=DIRECTION('',(1.E0,0.E0,0.E0));
#322=VECTOR('',#321,9.999999999999E-1);
#323=CARTESIAN_POINT('',(7.9E0,0.E0,7.E0));
#324=LINE('',#323,#322);
#325=DIRECTION('',(1.E0,0.E0,0.E0));
#326=VECTOR('',#325,9.999999999999E-1);
#327=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#328=LINE('',#327,#326);
#329=DIRECTION('',(1.E0,0.E0,0.E0));
#330=VECTOR('',#329,9.999999999999E-1);
#331=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#332=LINE('',#331,#330);
#333=CARTESIAN_POINT('',(8.9E0,0.E0,1.221245327088E-14));
#334=DIRECTION('',(0.E0,1.E0,0.E0));
#335=DIRECTION('',(0.E0,0.E0,1.E0));
#336=AXIS2_PLACEMENT_3D('',#333,#334,#335);
#338=CARTESIAN_POINT('',(8.9E0,-1.2E1,1.147768945858E-14));
#339=DIRECTION('',(0.E0,1.E0,0.E0));
#340=DIRECTION('',(0.E0,0.E0,1.E0));
#341=AXIS2_PLACEMENT_3D('',#338,#339,#340);
#343=DIRECTION('',(0.E0,1.E0,0.E0));
#344=VECTOR('',#343,1.2E1);
#345=CARTESIAN_POINT('',(8.9E0,-1.2E1,7.E0));
#346=LINE('',#345,#344);
#347=CARTESIAN_POINT('',(8.9E0,1.2E1,1.294721708317E-14));
#348=DIRECTION('',(0.E0,1.E0,0.E0));
#349=DIRECTION('',(0.E0,0.E0,1.E0));
#350=AXIS2_PLACEMENT_3D('',#347,#348,#349);
#352=DIRECTION('',(0.E0,1.E0,0.E0));
#353=VECTOR('',#352,1.2E1);
#354=CARTESIAN_POINT('',(8.9E0,1.2E1,7.E0));
#355=LINE('',#354,#353);
#356=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#357=VECTOR('',#356,5.675644347018E0);
#358=CARTESIAN_POINT('',(2.837822173509E0,0.E0,-3.5E0));
#359=LINE('',#358,#357);
#360=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#361=VECTOR('',#360,5.675644347018E0);
#362=CARTESIAN_POINT('',(2.837822173509E0,-1.2E1,-3.5E0));
#363=LINE('',#362,#361);
#364=DIRECTION('',(0.E0,1.E0,0.E0));
#365=VECTOR('',#364,1.2E1);
#366=CARTESIAN_POINT('',(2.837822173509E0,-1.2E1,-3.5E0));
#367=LINE('',#366,#365);
#368=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#369=VECTOR('',#368,5.675644347018E0);
#370=CARTESIAN_POINT('',(2.837822173509E0,1.2E1,-3.5E0));
#371=LINE('',#370,#369);
#372=DIRECTION('',(0.E0,1.E0,0.E0));
#373=VECTOR('',#372,1.2E1);
#374=CARTESIAN_POINT('',(2.837822173509E0,1.2E1,-3.5E0));
#375=LINE('',#374,#373);
#376=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#377=VECTOR('',#376,8.218365543307E0);
#378=CARTESIAN_POINT('',(0.E0,-1.2E1,6.E0));
#379=LINE('',#378,#377);
#380=CARTESIAN_POINT('',(8.9E0,-1.2E1,0.E0));
#381=DIRECTION('',(0.E0,1.E0,0.E0));
#382=DIRECTION('',(1.E0,0.E0,0.E0));
#383=AXIS2_PLACEMENT_3D('',#380,#381,#382);
#385=CARTESIAN_POINT('',(8.9E0,-1.2E1,0.E0));
#386=DIRECTION('',(0.E0,1.E0,0.E0));
#387=DIRECTION('',(-1.E0,0.E0,0.E0));
#388=AXIS2_PLACEMENT_3D('',#385,#386,#387);
#390=DIRECTION('',(0.E0,1.E0,0.E0));
#391=VECTOR('',#390,1.2E1);
#392=CARTESIAN_POINT('',(1.19E1,1.2E1,0.E0));
#393=LINE('',#392,#391);
#394=DIRECTION('',(0.E0,1.E0,0.E0));
#395=VECTOR('',#394,1.2E1);
#396=CARTESIAN_POINT('',(1.19E1,-1.2E1,0.E0));
#397=LINE('',#396,#395);
#398=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#399=VECTOR('',#398,5.675644347018E0);
#400=CARTESIAN_POINT('',(2.837822173509E0,2.4E1,-3.5E0));
#401=LINE('',#400,#399);
#402=CARTESIAN_POINT('',(8.9E0,2.4E1,1.368198089546E-14));
#403=DIRECTION('',(0.E0,1.E0,0.E0));
#404=DIRECTION('',(0.E0,0.E0,1.E0));
#405=AXIS2_PLACEMENT_3D('',#402,#403,#404);
#407=DIRECTION('',(1.E0,0.E0,0.E0));
#408=VECTOR('',#407,5.E0);
#409=CARTESIAN_POINT('',(3.9E0,2.4E1,7.E0));
#410=LINE('',#409,#408);
#411=DIRECTION('',(0.E0,0.E0,1.E0));
#412=VECTOR('',#411,1.476050075737E1);
#413=CARTESIAN_POINT('',(3.9E0,2.4E1,7.E0));
#414=LINE('',#413,#412);
#415=DIRECTION('',(1.E0,0.E0,0.E0));
#416=VECTOR('',#415,3.9E0);
#417=CARTESIAN_POINT('',(0.E0,2.4E1,2.176050075737E1));
#418=LINE('',#417,#416);
#419=CARTESIAN_POINT('',(8.9E0,2.4E1,0.E0));
#420=DIRECTION('',(0.E0,1.E0,0.E0));
#421=DIRECTION('',(1.E0,0.E0,0.E0));
#422=AXIS2_PLACEMENT_3D('',#419,#420,#421);
#424=CARTESIAN_POINT('',(8.9E0,2.4E1,0.E0));
#425=DIRECTION('',(0.E0,1.E0,0.E0));
#426=DIRECTION('',(-1.E0,0.E0,0.E0));
#427=AXIS2_PLACEMENT_3D('',#424,#425,#426);
#429=CARTESIAN_POINT('',(3.9E0,2.E1,7.E0));
#430=DIRECTION('',(0.E0,0.E0,1.E0));
#431=DIRECTION('',(1.E0,0.E0,0.E0));
#432=AXIS2_PLACEMENT_3D('',#429,#430,#431);
#434=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,1.75E1));
#435=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,1.739301239937E1));
#436=CARTESIAN_POINT('',(7.869296878005E0,2.049472521446E1,1.717931975268E1));
#437=CARTESIAN_POINT('',(7.872214896377E0,2.047099160516E1,1.685921525244E1));
#438=CARTESIAN_POINT('',(7.876751023105E0,2.043150143733E1,1.654078480091E1));
#439=CARTESIAN_POINT('',(7.882420796629E0,2.037635585692E1,1.622469655847E1));
#440=CARTESIAN_POINT('',(7.888558835049E0,2.030568687027E1,1.591172661358E1));
#441=CARTESIAN_POINT('',(7.894328981285E0,2.021967407469E1,1.560263848669E1));
#442=CARTESIAN_POINT('',(7.898735552779E0,2.011848004238E1,1.529807110450E1));
#443=CARTESIAN_POINT('',(7.9E0,2.004115373794E1,1.509876897106E1));
#444=CARTESIAN_POINT('',(7.9E0,2.E1,1.5E1));
#446=CARTESIAN_POINT('',(7.9E0,2.E1,2.E1));
#447=CARTESIAN_POINT('',(7.9E0,2.004115304585E1,1.990123268996E1));
#448=CARTESIAN_POINT('',(7.898735595498E0,2.011847859685E1,1.970193287350E1));
#449=CARTESIAN_POINT('',(7.894329032411E0,2.021967325720E1,1.939736431383E1));
#450=CARTESIAN_POINT('',(7.888558855761E0,2.030568665738E1,1.908827436163E1));
#451=CARTESIAN_POINT('',(7.882420721372E0,2.037635675333E1,1.877529980756E1));
#452=CARTESIAN_POINT('',(7.876750732421E0,2.043150414856E1,1.845919834057E1));
#453=CARTESIAN_POINT('',(7.872214625843E0,2.047099385175E1,1.814076202629E1));
#454=CARTESIAN_POINT('',(7.869296792246E0,2.049472588792E1,1.782066305564E1));
#455=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,1.760698071284E1));
#456=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,1.75E1));
#458=CARTESIAN_POINT('',(7.569633861545E0,2.159178746138E1,2.656664919788E1));
#459=CARTESIAN_POINT('',(7.620941944769E0,2.147350415777E1,2.652749695758E1));
#460=CARTESIAN_POINT('',(7.714456413070E0,2.122699784601E1,2.644094749351E1));
#461=CARTESIAN_POINT('',(7.822468721401E0,2.082142259332E1,2.628563297700E1));
#462=CARTESIAN_POINT('',(7.886848920270E0,2.040304691607E1,2.611625015917E1));
#463=CARTESIAN_POINT('',(7.9E0,2.013341138225E1,2.600394320094E1));
#464=CARTESIAN_POINT('',(7.9E0,2.E1,2.594817261099E1));
#466=CARTESIAN_POINT('',(3.9E0,2.4E1,2.176050075737E1));
#467=CARTESIAN_POINT('',(4.175717279077E0,2.4E1,2.209818408087E1));
#468=CARTESIAN_POINT('',(4.722053794686E0,2.394431008723E1,2.276724299520E1));
#469=CARTESIAN_POINT('',(5.528829887626E0,2.368528706326E1,2.376639228214E1));
#470=CARTESIAN_POINT('',(6.236631047825E0,2.327845840982E1,2.466553317779E1));
#471=CARTESIAN_POINT('',(6.813120283183E0,2.277408240510E1,2.542993691758E1));
#472=CARTESIAN_POINT('',(7.259341235728E0,2.220927552679E1,2.606267995760E1));
#473=CARTESIAN_POINT('',(7.479511048971E0,2.179955246314E1,2.641137980962E1));
#474=CARTESIAN_POINT('',(7.569633861545E0,2.159178746138E1,2.656664919788E1));
#476=DIRECTION('',(-1.E0,0.E0,0.E0));
#477=VECTOR('',#476,1.368626966597E0);
#478=CARTESIAN_POINT('',(7.868626966597E0,2.05E1,1.75E1));
#479=LINE('',#478,#477);
#480=DIRECTION('',(-1.E0,0.E0,0.E0));
#481=VECTOR('',#480,1.4E0);
#482=CARTESIAN_POINT('',(7.9E0,7.5E0,1.75E1));
#483=LINE('',#482,#481);
#484=CARTESIAN_POINT('',(6.4E0,1.914893617021E1,2.764946889081E1));
#485=CARTESIAN_POINT('',(6.478632599893E0,1.930814115371E1,2.761840803943E1));
#486=CARTESIAN_POINT('',(6.635028853050E0,1.962228361590E1,2.754382530502E1));
#487=CARTESIAN_POINT('',(6.865635314879E0,2.008427524469E1,2.739371904973E1));
#488=CARTESIAN_POINT('',(7.081429253927E0,2.052167789055E1,2.721149242939E1));
#489=CARTESIAN_POINT('',(7.275203981969E0,2.092560280998E1,2.700500762326E1));
#490=CARTESIAN_POINT('',(7.439679555649E0,2.128467658910E1,2.678689646526E1));
#491=CARTESIAN_POINT('',(7.529439330940E0,2.149408327524E1,2.663966664107E1));
#492=CARTESIAN_POINT('',(7.569633861545E0,2.159178746138E1,2.656664919788E1));
#494=DIRECTION('',(1.E0,5.484546650169E-8,-1.070033728290E-8));
#495=VECTOR('',#494,6.4E0);
#496=CARTESIAN_POINT('',(0.E0,1.914893581920E1,2.764946895930E1));
#497=LINE('',#496,#495);
#498=DIRECTION('',(0.E0,1.E0,0.E0));
#499=VECTOR('',#498,1.2E1);
#500=CARTESIAN_POINT('',(5.9E0,1.2E1,0.E0));
#501=LINE('',#500,#499);
#502=DIRECTION('',(0.E0,1.E0,0.E0));
#503=VECTOR('',#502,1.2E1);
#504=CARTESIAN_POINT('',(5.9E0,-1.2E1,0.E0));
#505=LINE('',#504,#503);
#506=CARTESIAN_POINT('',(6.5E0,-1.4E1,1.75E1));
#507=DIRECTION('',(1.E0,0.E0,0.E0));
#508=DIRECTION('',(0.E0,-1.E0,0.E0));
#509=AXIS2_PLACEMENT_3D('',#506,#507,#508);
#511=DIRECTION('',(1.E0,0.E0,0.E0));
#512=VECTOR('',#511,1.4E0);
#513=CARTESIAN_POINT('',(6.5E0,-7.5E0,1.75E1));
#514=LINE('',#513,#512);
#515=CARTESIAN_POINT('',(6.5E0,-1.4E1,1.75E1));
#516=DIRECTION('',(-1.E0,0.E0,0.E0));
#517=DIRECTION('',(0.E0,-1.E0,0.E0));
#518=AXIS2_PLACEMENT_3D('',#515,#516,#517);
#520=DIRECTION('',(1.E0,0.E0,0.E0));
#521=VECTOR('',#520,1.368626966597E0);
#522=CARTESIAN_POINT('',(6.5E0,-2.05E1,1.75E1));
#523=LINE('',#522,#521);
#524=DIRECTION('',(7.071067811865E-1,-7.071067811865E-1,0.E0));
#525=VECTOR('',#524,4.525483399594E0);
#526=CARTESIAN_POINT('',(3.3E0,-1.73E1,1.75E1));
#527=LINE('',#526,#525);
#528=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,0.E0));
#529=VECTOR('',#528,4.525483399594E0);
#530=CARTESIAN_POINT('',(3.3E0,-1.07E1,1.75E1));
#531=LINE('',#530,#529);
#532=CARTESIAN_POINT('',(3.3E0,-1.4E1,1.75E1));
#533=DIRECTION('',(-1.E0,0.E0,0.E0));
#534=DIRECTION('',(0.E0,-1.E0,0.E0));
#535=AXIS2_PLACEMENT_3D('',#532,#533,#534);
#537=CARTESIAN_POINT('',(3.3E0,-1.4E1,1.75E1));
#538=DIRECTION('',(1.E0,0.E0,0.E0));
#539=DIRECTION('',(0.E0,-1.E0,0.E0));
#540=AXIS2_PLACEMENT_3D('',#537,#538,#539);
#542=DIRECTION('',(1.E0,0.E0,0.E0));
#543=VECTOR('',#542,3.3E0);
#544=CARTESIAN_POINT('',(0.E0,-1.73E1,1.75E1));
#545=LINE('',#544,#543);
#546=DIRECTION('',(1.E0,0.E0,0.E0));
#547=VECTOR('',#546,3.3E0);
#548=CARTESIAN_POINT('',(0.E0,-1.07E1,1.75E1));
#549=LINE('',#548,#547);
#550=DIRECTION('',(-1.E0,0.E0,0.E0));
#551=VECTOR('',#550,2.5E0);
#552=CARTESIAN_POINT('',(0.E0,2.05E1,2.15E1));
#553=LINE('',#552,#551);
#554=DIRECTION('',(-1.E0,0.E0,0.E0));
#555=VECTOR('',#554,2.5E0);
#556=CARTESIAN_POINT('',(0.E0,2.05E1,1.35E1));
#557=LINE('',#556,#555);
#558=DIRECTION('',(-1.E0,0.E0,0.E0));
#559=VECTOR('',#558,2.5E0);
#560=CARTESIAN_POINT('',(0.E0,2.15E1,1.35E1));
#561=LINE('',#560,#559);
#562=DIRECTION('',(-1.E0,0.E0,0.E0));
#563=VECTOR('',#562,2.5E0);
#564=CARTESIAN_POINT('',(0.E0,2.15E1,2.15E1));
#565=LINE('',#564,#563);
#566=DIRECTION('',(0.E0,0.E0,-1.E0));
#567=VECTOR('',#566,8.E0);
#568=CARTESIAN_POINT('',(-2.5E0,2.05E1,2.15E1));
#569=LINE('',#568,#567);
#570=DIRECTION('',(0.E0,1.E0,0.E0));
#571=VECTOR('',#570,1.E0);
#572=CARTESIAN_POINT('',(-2.5E0,2.05E1,1.35E1));
#573=LINE('',#572,#571);
#574=DIRECTION('',(0.E0,0.E0,1.E0));
#575=VECTOR('',#574,8.E0);
#576=CARTESIAN_POINT('',(-2.5E0,2.15E1,1.35E1));
#577=LINE('',#576,#575);
#578=DIRECTION('',(0.E0,-1.E0,0.E0));
#579=VECTOR('',#578,1.E0);
#580=CARTESIAN_POINT('',(-2.5E0,2.15E1,2.15E1));
#581=LINE('',#580,#579);
#582=DIRECTION('',(-1.E0,0.E0,0.E0));
#583=VECTOR('',#582,2.5E0);
#584=CARTESIAN_POINT('',(0.E0,-2.05E1,2.15E1));
#585=LINE('',#584,#583);
#586=DIRECTION('',(-1.E0,0.E0,0.E0));
#587=VECTOR('',#586,2.5E0);
#588=CARTESIAN_POINT('',(0.E0,-2.15E1,2.15E1));
#589=LINE('',#588,#587);
#590=DIRECTION('',(-1.E0,0.E0,0.E0));
#591=VECTOR('',#590,2.5E0);
#592=CARTESIAN_POINT('',(0.E0,-2.15E1,1.35E1));
#593=LINE('',#592,#591);
#594=DIRECTION('',(-1.E0,0.E0,0.E0));
#595=VECTOR('',#594,2.5E0);
#596=CARTESIAN_POINT('',(0.E0,-2.05E1,1.35E1));
#597=LINE('',#596,#595);
#598=DIRECTION('',(0.E0,-1.E0,0.E0));
#599=VECTOR('',#598,1.E0);
#600=CARTESIAN_POINT('',(-2.5E0,-2.05E1,2.15E1));
#601=LINE('',#600,#599);
#602=DIRECTION('',(0.E0,0.E0,-1.E0));
#603=VECTOR('',#602,8.E0);
#604=CARTESIAN_POINT('',(-2.5E0,-2.15E1,2.15E1));
#605=LINE('',#604,#603);
#606=DIRECTION('',(0.E0,1.E0,0.E0));
#607=VECTOR('',#606,1.E0);
#608=CARTESIAN_POINT('',(-2.5E0,-2.15E1,1.35E1));
#609=LINE('',#608,#607);
#610=DIRECTION('',(0.E0,0.E0,1.E0));
#611=VECTOR('',#610,8.E0);
#612=CARTESIAN_POINT('',(-2.5E0,-2.05E1,1.35E1));
#613=LINE('',#612,#611);
#614=CARTESIAN_POINT('',(0.E0,-2.4E1,2.176050075737E1));
#615=CARTESIAN_POINT('',(3.9E0,-2.4E1,2.176050075737E1));
#616=VERTEX_POINT('',#614);
#617=VERTEX_POINT('',#615);
#618=CARTESIAN_POINT('',(0.E0,2.4E1,2.176050075737E1));
#619=CARTESIAN_POINT('',(3.9E0,2.4E1,2.176050075737E1));
#620=VERTEX_POINT('',#618);
#621=VERTEX_POINT('',#619);
#622=CARTESIAN_POINT('',(0.E0,1.914893581920E1,2.764946895930E1));
#623=VERTEX_POINT('',#622);
#624=CARTESIAN_POINT('',(0.E0,-1.914893804226E1,2.764946852558E1));
#625=VERTEX_POINT('',#624);
#626=CARTESIAN_POINT('',(7.9E0,2.E1,2.594817261099E1));
#627=CARTESIAN_POINT('',(7.9E0,-2.E1,2.594817261099E1));
#628=VERTEX_POINT('',#626);
#629=VERTEX_POINT('',#627);
#630=VERTEX_POINT('',#458);
#631=VERTEX_POINT('',#40);
#632=VERTEX_POINT('',#484);
#633=VERTEX_POINT('',#74);
#634=CARTESIAN_POINT('',(6.5E0,2.05E1,1.75E1));
#635=CARTESIAN_POINT('',(3.3E0,1.73E1,1.75E1));
#636=VERTEX_POINT('',#634);
#637=VERTEX_POINT('',#635);
#638=CARTESIAN_POINT('',(6.5E0,7.5E0,1.75E1));
#639=CARTESIAN_POINT('',(3.3E0,1.07E1,1.75E1));
#640=VERTEX_POINT('',#638);
#641=VERTEX_POINT('',#639);
#642=CARTESIAN_POINT('',(7.9E0,2.E1,1.5E1));
#643=CARTESIAN_POINT('',(7.9E0,7.5E0,1.75E1));
#644=VERTEX_POINT('',#642);
#645=VERTEX_POINT('',#643);
#646=CARTESIAN_POINT('',(7.9E0,2.E1,2.E1));
#647=VERTEX_POINT('',#646);
#648=CARTESIAN_POINT('',(0.E0,1.73E1,1.75E1));
#649=CARTESIAN_POINT('',(0.E0,1.07E1,1.75E1));
#650=VERTEX_POINT('',#648);
#651=VERTEX_POINT('',#649);
#652=VERTEX_POINT('',#434);
#653=CARTESIAN_POINT('',(3.3E0,-1.73E1,1.75E1));
#654=CARTESIAN_POINT('',(6.5E0,-2.05E1,1.75E1));
#655=VERTEX_POINT('',#653);
#656=VERTEX_POINT('',#654);
#657=CARTESIAN_POINT('',(3.3E0,-1.07E1,1.75E1));
#658=CARTESIAN_POINT('',(6.5E0,-7.5E0,1.75E1));
#659=VERTEX_POINT('',#657);
#660=VERTEX_POINT('',#658);
#661=CARTESIAN_POINT('',(7.9E0,-2.E1,1.5E1));
#662=CARTESIAN_POINT('',(7.9E0,-7.5E0,1.75E1));
#663=VERTEX_POINT('',#661);
#664=VERTEX_POINT('',#662);
#665=CARTESIAN_POINT('',(7.9E0,-2.E1,2.E1));
#666=VERTEX_POINT('',#665);
#667=CARTESIAN_POINT('',(0.E0,-1.73E1,1.75E1));
#668=CARTESIAN_POINT('',(0.E0,-1.07E1,1.75E1));
#669=VERTEX_POINT('',#667);
#670=VERTEX_POINT('',#668);
#671=VERTEX_POINT('',#64);
#672=CARTESIAN_POINT('',(8.9E0,2.4E1,7.E0));
#673=CARTESIAN_POINT('',(2.837822173509E0,2.4E1,-3.5E0));
#674=VERTEX_POINT('',#672);
#675=VERTEX_POINT('',#673);
#676=CARTESIAN_POINT('',(0.E0,2.4E1,1.415252187363E0));
#677=VERTEX_POINT('',#676);
#678=CARTESIAN_POINT('',(7.9E0,2.E1,7.E0));
#679=CARTESIAN_POINT('',(3.9E0,2.4E1,7.E0));
#680=VERTEX_POINT('',#678);
#681=VERTEX_POINT('',#679);
#682=CARTESIAN_POINT('',(3.9E0,-2.4E1,7.118307004459E0));
#683=CARTESIAN_POINT('',(0.E0,-2.4E1,6.E0));
#684=VERTEX_POINT('',#682);
#685=VERTEX_POINT('',#683);
#686=CARTESIAN_POINT('',(7.9E0,-1.2E1,7.E0));
#687=CARTESIAN_POINT('',(7.9E0,-1.2E1,8.265288547495E0));
#688=VERTEX_POINT('',#686);
#689=VERTEX_POINT('',#687);
#690=CARTESIAN_POINT('',(7.9E0,-2.E1,8.265288547495E0));
#691=VERTEX_POINT('',#690);
#692=CARTESIAN_POINT('',(0.E0,-1.2E1,1.415252187363E0));
#693=CARTESIAN_POINT('',(0.E0,-1.2E1,6.E0));
#694=VERTEX_POINT('',#692);
#695=VERTEX_POINT('',#693);
#696=CARTESIAN_POINT('',(8.9E0,-1.2E1,7.E0));
#697=VERTEX_POINT('',#696);
#698=CARTESIAN_POINT('',(2.837822173509E0,-1.2E1,-3.5E0));
#699=VERTEX_POINT('',#698);
#700=CARTESIAN_POINT('',(7.9E0,0.E0,7.E0));
#701=CARTESIAN_POINT('',(7.9E0,0.E0,8.265288547495E0));
#702=VERTEX_POINT('',#700);
#703=VERTEX_POINT('',#701);
#704=CARTESIAN_POINT('',(7.9E0,1.2E1,7.E0));
#705=CARTESIAN_POINT('',(7.9E0,1.2E1,8.265288547495E0));
#706=VERTEX_POINT('',#704);
#707=VERTEX_POINT('',#705);
#708=CARTESIAN_POINT('',(0.E0,0.E0,1.415252187363E0));
#709=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#710=VERTEX_POINT('',#708);
#711=VERTEX_POINT('',#709);
#712=CARTESIAN_POINT('',(0.E0,1.2E1,1.415252187363E0));
#713=CARTESIAN_POINT('',(0.E0,1.2E1,6.E0));
#714=VERTEX_POINT('',#712);
#715=VERTEX_POINT('',#713);
#716=CARTESIAN_POINT('',(8.9E0,0.E0,7.E0));
#717=VERTEX_POINT('',#716);
#718=CARTESIAN_POINT('',(8.9E0,1.2E1,7.E0));
#719=VERTEX_POINT('',#718);
#720=CARTESIAN_POINT('',(2.837822173509E0,0.E0,-3.5E0));
#721=VERTEX_POINT('',#720);
#722=CARTESIAN_POINT('',(2.837822173509E0,1.2E1,-3.5E0));
#723=VERTEX_POINT('',#722);
#724=CARTESIAN_POINT('',(1.19E1,2.4E1,0.E0));
#725=CARTESIAN_POINT('',(5.9E0,2.4E1,0.E0));
#726=VERTEX_POINT('',#724);
#727=VERTEX_POINT('',#725);
#728=CARTESIAN_POINT('',(1.19E1,-1.2E1,0.E0));
#729=CARTESIAN_POINT('',(5.9E0,-1.2E1,0.E0));
#730=VERTEX_POINT('',#728);
#731=VERTEX_POINT('',#729);
#732=CARTESIAN_POINT('',(1.19E1,0.E0,0.E0));
#733=CARTESIAN_POINT('',(5.9E0,0.E0,0.E0));
#734=VERTEX_POINT('',#732);
#735=VERTEX_POINT('',#733);
#736=CARTESIAN_POINT('',(1.19E1,1.2E1,0.E0));
#737=CARTESIAN_POINT('',(5.9E0,1.2E1,0.E0));
#738=VERTEX_POINT('',#736);
#739=VERTEX_POINT('',#737);
#740=CARTESIAN_POINT('',(-2.5E0,2.05E1,2.15E1));
#741=CARTESIAN_POINT('',(-2.5E0,2.05E1,1.35E1));
#742=VERTEX_POINT('',#740);
#743=VERTEX_POINT('',#741);
#744=CARTESIAN_POINT('',(-2.5E0,2.15E1,1.35E1));
#745=VERTEX_POINT('',#744);
#746=CARTESIAN_POINT('',(-2.5E0,2.15E1,2.15E1));
#747=VERTEX_POINT('',#746);
#748=CARTESIAN_POINT('',(0.E0,2.05E1,2.15E1));
#749=CARTESIAN_POINT('',(0.E0,2.05E1,1.35E1));
#750=VERTEX_POINT('',#748);
#751=VERTEX_POINT('',#749);
#752=CARTESIAN_POINT('',(0.E0,2.15E1,1.35E1));
#753=VERTEX_POINT('',#752);
#754=CARTESIAN_POINT('',(0.E0,2.15E1,2.15E1));
#755=VERTEX_POINT('',#754);
#756=CARTESIAN_POINT('',(-2.5E0,-2.05E1,2.15E1));
#757=CARTESIAN_POINT('',(-2.5E0,-2.15E1,2.15E1));
#758=VERTEX_POINT('',#756);
#759=VERTEX_POINT('',#757);
#760=CARTESIAN_POINT('',(-2.5E0,-2.15E1,1.35E1));
#761=VERTEX_POINT('',#760);
#762=CARTESIAN_POINT('',(-2.5E0,-2.05E1,1.35E1));
#763=VERTEX_POINT('',#762);
#764=CARTESIAN_POINT('',(0.E0,-2.05E1,2.15E1));
#765=CARTESIAN_POINT('',(0.E0,-2.15E1,2.15E1));
#766=VERTEX_POINT('',#764);
#767=VERTEX_POINT('',#765);
#768=CARTESIAN_POINT('',(0.E0,-2.15E1,1.35E1));
#769=VERTEX_POINT('',#768);
#770=CARTESIAN_POINT('',(0.E0,-2.05E1,1.35E1));
#771=VERTEX_POINT('',#770);
#772=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#773=DIRECTION('',(0.E0,1.E0,0.E0));
#774=DIRECTION('',(1.E0,0.E0,0.E0));
#775=AXIS2_PLACEMENT_3D('',#772,#773,#774);
#776=PLANE('',#775);
#778=ORIENTED_EDGE('',*,*,#777,.T.);
#780=ORIENTED_EDGE('',*,*,#779,.F.);
#782=ORIENTED_EDGE('',*,*,#781,.T.);
#784=ORIENTED_EDGE('',*,*,#783,.F.);
#785=EDGE_LOOP('',(#778,#780,#782,#784));
#786=FACE_OUTER_BOUND('',#785,.F.);
#787=ADVANCED_FACE('',(#786),#776,.F.);
#788=CARTESIAN_POINT('',(0.E0,-1.2E1,6.E0));
#789=DIRECTION('',(-2.756373558170E-1,0.E0,9.612616959383E-1));
#790=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#791=AXIS2_PLACEMENT_3D('',#788,#789,#790);
#792=PLANE('',#791);
#793=ORIENTED_EDGE('',*,*,#777,.F.);
#795=ORIENTED_EDGE('',*,*,#794,.T.);
#797=ORIENTED_EDGE('',*,*,#796,.T.);
#799=ORIENTED_EDGE('',*,*,#798,.F.);
#801=ORIENTED_EDGE('',*,*,#800,.F.);
#802=EDGE_LOOP('',(#793,#795,#797,#799,#801));
#803=FACE_OUTER_BOUND('',#802,.F.);
#804=ADVANCED_FACE('',(#803),#792,.F.);
#805=CARTESIAN_POINT('',(3.9E0,-2.E1,-3.45E1));
#806=DIRECTION('',(0.E0,0.E0,1.E0));
#807=DIRECTION('',(1.E0,0.E0,0.E0));
#808=AXIS2_PLACEMENT_3D('',#805,#806,#807);
#809=CYLINDRICAL_SURFACE('',#808,4.E0);
#810=ORIENTED_EDGE('',*,*,#794,.F.);
#811=ORIENTED_EDGE('',*,*,#783,.T.);
#813=ORIENTED_EDGE('',*,*,#812,.F.);
#815=ORIENTED_EDGE('',*,*,#814,.F.);
#817=ORIENTED_EDGE('',*,*,#816,.F.);
#819=ORIENTED_EDGE('',*,*,#818,.F.);
#821=ORIENTED_EDGE('',*,*,#820,.F.);
#823=ORIENTED_EDGE('',*,*,#822,.F.);
#824=EDGE_LOOP('',(#810,#811,#813,#815,#817,#819,#821,#823));
#825=FACE_OUTER_BOUND('',#824,.F.);
#826=ADVANCED_FACE('',(#825),#809,.T.);
#827=CARTESIAN_POINT('',(0.E0,-1.8E1,2.176050075737E1));
#828=DIRECTION('',(1.E0,0.E0,0.E0));
#829=DIRECTION('',(0.E0,0.E0,-1.E0));
#830=AXIS2_PLACEMENT_3D('',#827,#828,#829);
#831=CYLINDRICAL_SURFACE('',#830,5.999999999999E0);
#833=ORIENTED_EDGE('',*,*,#832,.F.);
#834=ORIENTED_EDGE('',*,*,#812,.T.);
#835=ORIENTED_EDGE('',*,*,#781,.F.);
#837=ORIENTED_EDGE('',*,*,#836,.F.);
#839=ORIENTED_EDGE('',*,*,#838,.T.);
#840=EDGE_LOOP('',(#833,#834,#835,#837,#839));
#841=FACE_OUTER_BOUND('',#840,.F.);
#842=ADVANCED_FACE('',(#841),#831,.T.);
#843=CARTESIAN_POINT('',(6.4E0,0.E0,-7.05E1));
#844=DIRECTION('',(1.E0,0.E0,0.E0));
#845=DIRECTION('',(0.E0,-3.420201433257E-1,9.396926207859E-1));
#846=AXIS2_PLACEMENT_3D('',#843,#844,#845);
#847=TOROIDAL_SURFACE('',#846,9.85E1,1.5E0);
#848=ORIENTED_EDGE('',*,*,#814,.T.);
#849=ORIENTED_EDGE('',*,*,#832,.T.);
#851=ORIENTED_EDGE('',*,*,#850,.F.);
#853=ORIENTED_EDGE('',*,*,#852,.T.);
#855=ORIENTED_EDGE('',*,*,#854,.T.);
#857=ORIENTED_EDGE('',*,*,#856,.T.);
#858=EDGE_LOOP('',(#848,#849,#851,#853,#855,#857));
#859=FACE_OUTER_BOUND('',#858,.F.);
#860=ADVANCED_FACE('',(#859),#847,.T.);
#861=CARTESIAN_POINT('',(0.E0,3.961275751863E-13,-7.049999999999E1));
#862=DIRECTION('',(1.E0,0.E0,0.E0));
#863=DIRECTION('',(0.E0,0.E0,-1.E0));
#864=AXIS2_PLACEMENT_3D('',#861,#862,#863);
#865=CYLINDRICAL_SURFACE('',#864,9.999999999999E1);
#866=ORIENTED_EDGE('',*,*,#850,.T.);
#867=ORIENTED_EDGE('',*,*,#838,.F.);
#869=ORIENTED_EDGE('',*,*,#868,.F.);
#871=ORIENTED_EDGE('',*,*,#870,.T.);
#872=EDGE_LOOP('',(#866,#867,#869,#871));
#873=FACE_OUTER_BOUND('',#872,.F.);
#874=ADVANCED_FACE('',(#873),#865,.T.);
#875=CARTESIAN_POINT('',(0.E0,-2.4E1,1.7E0));
#876=DIRECTION('',(-1.E0,0.E0,0.E0));
#877=DIRECTION('',(0.E0,0.E0,1.E0));
#878=AXIS2_PLACEMENT_3D('',#875,#876,#877);
#879=PLANE('',#878);
#881=ORIENTED_EDGE('',*,*,#880,.T.);
#883=ORIENTED_EDGE('',*,*,#882,.T.);
#885=ORIENTED_EDGE('',*,*,#884,.F.);
#887=ORIENTED_EDGE('',*,*,#886,.T.);
#889=ORIENTED_EDGE('',*,*,#888,.T.);
#891=ORIENTED_EDGE('',*,*,#890,.T.);
#892=ORIENTED_EDGE('',*,*,#868,.T.);
#893=ORIENTED_EDGE('',*,*,#836,.T.);
#894=ORIENTED_EDGE('',*,*,#779,.T.);
#895=ORIENTED_EDGE('',*,*,#800,.T.);
#897=ORIENTED_EDGE('',*,*,#896,.F.);
#899=ORIENTED_EDGE('',*,*,#898,.T.);
#900=EDGE_LOOP('',(#881,#883,#885,#887,#889,#891,#892,#893,#894,#895,#897,
#899));
#901=FACE_OUTER_BOUND('',#900,.F.);
#903=ORIENTED_EDGE('',*,*,#902,.T.);
#905=ORIENTED_EDGE('',*,*,#904,.T.);
#906=EDGE_LOOP('',(#903,#905));
#907=FACE_BOUND('',#906,.F.);
#909=ORIENTED_EDGE('',*,*,#908,.F.);
#911=ORIENTED_EDGE('',*,*,#910,.F.);
#912=EDGE_LOOP('',(#909,#911));
#913=FACE_BOUND('',#912,.F.);
#915=ORIENTED_EDGE('',*,*,#914,.F.);
#917=ORIENTED_EDGE('',*,*,#916,.F.);
#919=ORIENTED_EDGE('',*,*,#918,.F.);
#921=ORIENTED_EDGE('',*,*,#920,.F.);
#922=EDGE_LOOP('',(#915,#917,#919,#921));
#923=FACE_BOUND('',#922,.F.);
#925=ORIENTED_EDGE('',*,*,#924,.F.);
#927=ORIENTED_EDGE('',*,*,#926,.F.);
#929=ORIENTED_EDGE('',*,*,#928,.F.);
#931=ORIENTED_EDGE('',*,*,#930,.F.);
#932=EDGE_LOOP('',(#925,#927,#929,#931));
#933=FACE_BOUND('',#932,.F.);
#934=ADVANCED_FACE('',(#901,#907,#913,#923,#933),#879,.T.);
#935=CARTESIAN_POINT('',(1.05E1,1.4E1,1.75E1));
#936=DIRECTION('',(-1.E0,0.E0,0.E0));
#937=DIRECTION('',(0.E0,1.E0,0.E0));
#938=AXIS2_PLACEMENT_3D('',#935,#936,#937);
#939=CYLINDRICAL_SURFACE('',#938,3.3E0);
#940=ORIENTED_EDGE('',*,*,#902,.F.);
#942=ORIENTED_EDGE('',*,*,#941,.F.);
#944=ORIENTED_EDGE('',*,*,#943,.T.);
#946=ORIENTED_EDGE('',*,*,#945,.T.);
#947=EDGE_LOOP('',(#940,#942,#944,#946));
#948=FACE_OUTER_BOUND('',#947,.F.);
#949=ADVANCED_FACE('',(#948),#939,.F.);
#950=CARTESIAN_POINT('',(1.05E1,1.4E1,1.75E1));
#951=DIRECTION('',(-1.E0,0.E0,0.E0));
#952=DIRECTION('',(0.E0,1.E0,0.E0));
#953=AXIS2_PLACEMENT_3D('',#950,#951,#952);
#954=CYLINDRICAL_SURFACE('',#953,3.3E0);
#955=ORIENTED_EDGE('',*,*,#904,.F.);
#956=ORIENTED_EDGE('',*,*,#945,.F.);
#958=ORIENTED_EDGE('',*,*,#957,.F.);
#959=ORIENTED_EDGE('',*,*,#941,.T.);
#960=EDGE_LOOP('',(#955,#956,#958,#959));
#961=FACE_OUTER_BOUND('',#960,.F.);
#962=ADVANCED_FACE('',(#961),#954,.F.);
#963=CARTESIAN_POINT('',(4.9E0,1.4E1,1.75E1));
#964=DIRECTION('',(1.E0,0.E0,0.E0));
#965=DIRECTION('',(0.E0,-1.E0,0.E0));
#966=AXIS2_PLACEMENT_3D('',#963,#964,#965);
#967=CONICAL_SURFACE('',#966,4.9E0,4.5E1);
#969=ORIENTED_EDGE('',*,*,#968,.T.);
#970=ORIENTED_EDGE('',*,*,#957,.T.);
#972=ORIENTED_EDGE('',*,*,#971,.F.);
#974=ORIENTED_EDGE('',*,*,#973,.F.);
#975=EDGE_LOOP('',(#969,#970,#972,#974));
#976=FACE_OUTER_BOUND('',#975,.F.);
#977=ADVANCED_FACE('',(#976),#967,.F.);
#978=CARTESIAN_POINT('',(4.9E0,1.4E1,1.75E1));
#979=DIRECTION('',(1.E0,0.E0,0.E0));
#980=DIRECTION('',(0.E0,-1.E0,0.E0));
#981=AXIS2_PLACEMENT_3D('',#978,#979,#980);
#982=CONICAL_SURFACE('',#981,4.9E0,4.5E1);
#983=ORIENTED_EDGE('',*,*,#968,.F.);
#985=ORIENTED_EDGE('',*,*,#984,.T.);
#986=ORIENTED_EDGE('',*,*,#971,.T.);
#987=ORIENTED_EDGE('',*,*,#943,.F.);
#988=EDGE_LOOP('',(#983,#985,#986,#987));
#989=FACE_OUTER_BOUND('',#988,.F.);
#990=ADVANCED_FACE('',(#989),#982,.F.);
#991=CARTESIAN_POINT('',(1.05E1,1.4E1,1.75E1));
#992=DIRECTION('',(-1.E0,0.E0,0.E0));
#993=DIRECTION('',(0.E0,1.E0,0.E0));
#994=AXIS2_PLACEMENT_3D('',#991,#992,#993);
#995=CYLINDRICAL_SURFACE('',#994,6.5E0);
#997=ORIENTED_EDGE('',*,*,#996,.T.);
#999=ORIENTED_EDGE('',*,*,#998,.T.);
#1000=ORIENTED_EDGE('',*,*,#984,.F.);
#1002=ORIENTED_EDGE('',*,*,#1001,.F.);
#1004=ORIENTED_EDGE('',*,*,#1003,.T.);
#1005=EDGE_LOOP('',(#997,#999,#1000,#1002,#1004));
#1006=FACE_OUTER_BOUND('',#1005,.F.);
#1007=ADVANCED_FACE('',(#1006),#995,.F.);
#1008=CARTESIAN_POINT('',(7.9E0,-2.4E1,2.95E1));
#1009=DIRECTION('',(1.E0,0.E0,0.E0));
#1010=DIRECTION('',(0.E0,0.E0,-1.E0));
#1011=AXIS2_PLACEMENT_3D('',#1008,#1009,#1010);
#1012=PLANE('',#1011);
#1014=ORIENTED_EDGE('',*,*,#1013,.F.);
#1016=ORIENTED_EDGE('',*,*,#1015,.F.);
#1018=ORIENTED_EDGE('',*,*,#1017,.T.);
#1019=ORIENTED_EDGE('',*,*,#796,.F.);
#1020=ORIENTED_EDGE('',*,*,#822,.T.);
#1022=ORIENTED_EDGE('',*,*,#1021,.T.);
#1024=ORIENTED_EDGE('',*,*,#1023,.T.);
#1025=ORIENTED_EDGE('',*,*,#816,.T.);
#1026=ORIENTED_EDGE('',*,*,#856,.F.);
#1028=ORIENTED_EDGE('',*,*,#1027,.F.);
#1030=ORIENTED_EDGE('',*,*,#1029,.F.);
#1031=ORIENTED_EDGE('',*,*,#996,.F.);
#1033=ORIENTED_EDGE('',*,*,#1032,.F.);
#1035=ORIENTED_EDGE('',*,*,#1034,.F.);
#1037=ORIENTED_EDGE('',*,*,#1036,.T.);
#1039=ORIENTED_EDGE('',*,*,#1038,.F.);
#1040=EDGE_LOOP('',(#1014,#1016,#1018,#1019,#1020,#1022,#1024,#1025,#1026,#1028,
#1030,#1031,#1033,#1035,#1037,#1039));
#1041=FACE_OUTER_BOUND('',#1040,.F.);
#1042=ADVANCED_FACE('',(#1041),#1012,.T.);
#1043=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1044=DIRECTION('',(0.E0,1.E0,0.E0));
#1045=DIRECTION('',(1.E0,0.E0,0.E0));
#1046=AXIS2_PLACEMENT_3D('',#1043,#1044,#1045);
#1047=PLANE('',#1046);
#1048=ORIENTED_EDGE('',*,*,#1013,.T.);
#1050=ORIENTED_EDGE('',*,*,#1049,.F.);
#1051=ORIENTED_EDGE('',*,*,#880,.F.);
#1053=ORIENTED_EDGE('',*,*,#1052,.F.);
#1055=ORIENTED_EDGE('',*,*,#1054,.F.);
#1057=ORIENTED_EDGE('',*,*,#1056,.F.);
#1058=EDGE_LOOP('',(#1048,#1050,#1051,#1053,#1055,#1057));
#1059=FACE_OUTER_BOUND('',#1058,.F.);
#1061=ORIENTED_EDGE('',*,*,#1060,.T.);
#1063=ORIENTED_EDGE('',*,*,#1062,.T.);
#1064=EDGE_LOOP('',(#1061,#1063));
#1065=FACE_BOUND('',#1064,.F.);
#1066=ADVANCED_FACE('',(#1059,#1065),#1047,.T.);
#1067=CARTESIAN_POINT('',(0.E0,0.E0,6.E0));
#1068=DIRECTION('',(-2.756373558170E-1,0.E0,9.612616959383E-1));
#1069=DIRECTION('',(9.612616959383E-1,0.E0,2.756373558170E-1));
#1070=AXIS2_PLACEMENT_3D('',#1067,#1068,#1069);
#1071=PLANE('',#1070);
#1072=ORIENTED_EDGE('',*,*,#1038,.T.);
#1074=ORIENTED_EDGE('',*,*,#1073,.F.);
#1075=ORIENTED_EDGE('',*,*,#882,.F.);
#1076=ORIENTED_EDGE('',*,*,#1049,.T.);
#1077=EDGE_LOOP('',(#1072,#1074,#1075,#1076));
#1078=FACE_OUTER_BOUND('',#1077,.F.);
#1079=ADVANCED_FACE('',(#1078),#1071,.F.);
#1080=CARTESIAN_POINT('',(0.E0,1.2E1,0.E0));
#1081=DIRECTION('',(0.E0,1.E0,0.E0));
#1082=DIRECTION('',(1.E0,0.E0,0.E0));
#1083=AXIS2_PLACEMENT_3D('',#1080,#1081,#1082);
#1084=PLANE('',#1083);
#1085=ORIENTED_EDGE('',*,*,#1036,.F.);
#1087=ORIENTED_EDGE('',*,*,#1086,.T.);
#1089=ORIENTED_EDGE('',*,*,#1088,.T.);
#1091=ORIENTED_EDGE('',*,*,#1090,.T.);
#1092=ORIENTED_EDGE('',*,*,#884,.T.);
#1093=ORIENTED_EDGE('',*,*,#1073,.T.);
#1094=EDGE_LOOP('',(#1085,#1087,#1089,#1091,#1092,#1093));
#1095=FACE_OUTER_BOUND('',#1094,.F.);
#1097=ORIENTED_EDGE('',*,*,#1096,.F.);
#1099=ORIENTED_EDGE('',*,*,#1098,.F.);
#1100=EDGE_LOOP('',(#1097,#1099));
#1101=FACE_BOUND('',#1100,.F.);
#1102=ADVANCED_FACE('',(#1095,#1101),#1084,.F.);
#1103=CARTESIAN_POINT('',(0.E0,-2.4E1,7.E0));
#1104=DIRECTION('',(0.E0,0.E0,1.E0));
#1105=DIRECTION('',(1.E0,0.E0,0.E0));
#1106=AXIS2_PLACEMENT_3D('',#1103,#1104,#1105);
#1107=PLANE('',#1106);
#1108=ORIENTED_EDGE('',*,*,#1056,.T.);
#1110=ORIENTED_EDGE('',*,*,#1109,.F.);
#1112=ORIENTED_EDGE('',*,*,#1111,.F.);
#1113=ORIENTED_EDGE('',*,*,#1015,.T.);
#1114=EDGE_LOOP('',(#1108,#1110,#1112,#1113));
#1115=FACE_OUTER_BOUND('',#1114,.F.);
#1116=ADVANCED_FACE('',(#1115),#1107,.T.);
#1117=CARTESIAN_POINT('',(0.E0,-2.4E1,7.E0));
#1118=DIRECTION('',(0.E0,0.E0,1.E0));
#1119=DIRECTION('',(1.E0,0.E0,0.E0));
#1120=AXIS2_PLACEMENT_3D('',#1117,#1118,#1119);
#1121=PLANE('',#1120);
#1122=ORIENTED_EDGE('',*,*,#1086,.F.);
#1123=ORIENTED_EDGE('',*,*,#1034,.T.);
#1125=ORIENTED_EDGE('',*,*,#1124,.T.);
#1127=ORIENTED_EDGE('',*,*,#1126,.T.);
#1129=ORIENTED_EDGE('',*,*,#1128,.F.);
#1130=EDGE_LOOP('',(#1122,#1123,#1125,#1127,#1129));
#1131=FACE_OUTER_BOUND('',#1130,.F.);
#1132=ADVANCED_FACE('',(#1131),#1121,.T.);
#1133=CARTESIAN_POINT('',(8.9E0,-2.4E1,1.074292564629E-14));
#1134=DIRECTION('',(0.E0,1.E0,0.E0));
#1135=DIRECTION('',(1.E0,0.E0,0.E0));
#1136=AXIS2_PLACEMENT_3D('',#1133,#1134,#1135);
#1137=CYLINDRICAL_SURFACE('',#1136,7.E0);
#1138=ORIENTED_EDGE('',*,*,#1054,.T.);
#1140=ORIENTED_EDGE('',*,*,#1139,.F.);
#1142=ORIENTED_EDGE('',*,*,#1141,.F.);
#1143=ORIENTED_EDGE('',*,*,#1109,.T.);
#1144=EDGE_LOOP('',(#1138,#1140,#1142,#1143));
#1145=FACE_OUTER_BOUND('',#1144,.F.);
#1146=ADVANCED_FACE('',(#1145),#1137,.T.);
#1147=CARTESIAN_POINT('',(8.9E0,-2.4E1,1.074292564629E-14));
#1148=DIRECTION('',(0.E0,1.E0,0.E0));
#1149=DIRECTION('',(1.E0,0.E0,0.E0));
#1150=AXIS2_PLACEMENT_3D('',#1147,#1148,#1149);
#1151=CYLINDRICAL_SURFACE('',#1150,7.E0);
#1152=ORIENTED_EDGE('',*,*,#1088,.F.);
#1153=ORIENTED_EDGE('',*,*,#1128,.T.);
#1155=ORIENTED_EDGE('',*,*,#1154,.T.);
#1157=ORIENTED_EDGE('',*,*,#1156,.F.);
#1158=EDGE_LOOP('',(#1152,#1153,#1155,#1157));
#1159=FACE_OUTER_BOUND('',#1158,.F.);
#1160=ADVANCED_FACE('',(#1159),#1151,.T.);
#1161=CARTESIAN_POINT('',(2.837822173509E0,-2.4E1,-3.5E0));
#1162=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#1163=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#1164=AXIS2_PLACEMENT_3D('',#1161,#1162,#1163);
#1165=PLANE('',#1164);
#1166=ORIENTED_EDGE('',*,*,#1052,.T.);
#1167=ORIENTED_EDGE('',*,*,#898,.F.);
#1169=ORIENTED_EDGE('',*,*,#1168,.F.);
#1170=ORIENTED_EDGE('',*,*,#1139,.T.);
#1171=EDGE_LOOP('',(#1166,#1167,#1169,#1170));
#1172=FACE_OUTER_BOUND('',#1171,.F.);
#1173=ADVANCED_FACE('',(#1172),#1165,.T.);
#1174=CARTESIAN_POINT('',(2.837822173509E0,-2.4E1,-3.5E0));
#1175=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#1176=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#1177=AXIS2_PLACEMENT_3D('',#1174,#1175,#1176);
#1178=PLANE('',#1177);
#1179=ORIENTED_EDGE('',*,*,#1090,.F.);
#1180=ORIENTED_EDGE('',*,*,#1156,.T.);
#1182=ORIENTED_EDGE('',*,*,#1181,.T.);
#1183=ORIENTED_EDGE('',*,*,#886,.F.);
#1184=EDGE_LOOP('',(#1179,#1180,#1182,#1183));
#1185=FACE_OUTER_BOUND('',#1184,.F.);
#1186=ADVANCED_FACE('',(#1185),#1178,.T.);
#1187=CARTESIAN_POINT('',(0.E0,-1.2E1,0.E0));
#1188=DIRECTION('',(0.E0,1.E0,0.E0));
#1189=DIRECTION('',(1.E0,0.E0,0.E0));
#1190=AXIS2_PLACEMENT_3D('',#1187,#1188,#1189);
#1191=PLANE('',#1190);
#1192=ORIENTED_EDGE('',*,*,#1017,.F.);
#1193=ORIENTED_EDGE('',*,*,#1111,.T.);
#1194=ORIENTED_EDGE('',*,*,#1141,.T.);
#1195=ORIENTED_EDGE('',*,*,#1168,.T.);
#1196=ORIENTED_EDGE('',*,*,#896,.T.);
#1197=ORIENTED_EDGE('',*,*,#798,.T.);
#1198=EDGE_LOOP('',(#1192,#1193,#1194,#1195,#1196,#1197));
#1199=FACE_OUTER_BOUND('',#1198,.F.);
#1201=ORIENTED_EDGE('',*,*,#1200,.F.);
#1203=ORIENTED_EDGE('',*,*,#1202,.F.);
#1204=EDGE_LOOP('',(#1201,#1203));
#1205=FACE_BOUND('',#1204,.F.);
#1206=ADVANCED_FACE('',(#1199,#1205),#1191,.F.);
#1207=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1208=DIRECTION('',(0.E0,1.E0,0.E0));
#1209=DIRECTION('',(1.E0,0.E0,0.E0));
#1210=AXIS2_PLACEMENT_3D('',#1207,#1208,#1209);
#1211=CYLINDRICAL_SURFACE('',#1210,3.E0);
#1213=ORIENTED_EDGE('',*,*,#1212,.F.);
#1215=ORIENTED_EDGE('',*,*,#1214,.F.);
#1216=ORIENTED_EDGE('',*,*,#1096,.T.);
#1218=ORIENTED_EDGE('',*,*,#1217,.T.);
#1219=EDGE_LOOP('',(#1213,#1215,#1216,#1218));
#1220=FACE_OUTER_BOUND('',#1219,.F.);
#1221=ADVANCED_FACE('',(#1220),#1211,.F.);
#1222=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1223=DIRECTION('',(0.E0,1.E0,0.E0));
#1224=DIRECTION('',(1.E0,0.E0,0.E0));
#1225=AXIS2_PLACEMENT_3D('',#1222,#1223,#1224);
#1226=CYLINDRICAL_SURFACE('',#1225,3.E0);
#1227=ORIENTED_EDGE('',*,*,#1200,.T.);
#1229=ORIENTED_EDGE('',*,*,#1228,.T.);
#1230=ORIENTED_EDGE('',*,*,#1060,.F.);
#1232=ORIENTED_EDGE('',*,*,#1231,.F.);
#1233=EDGE_LOOP('',(#1227,#1229,#1230,#1232));
#1234=FACE_OUTER_BOUND('',#1233,.F.);
#1235=ADVANCED_FACE('',(#1234),#1226,.F.);
#1236=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1237=DIRECTION('',(0.E0,1.E0,0.E0));
#1238=DIRECTION('',(1.E0,0.E0,0.E0));
#1239=AXIS2_PLACEMENT_3D('',#1236,#1237,#1238);
#1240=PLANE('',#1239);
#1241=ORIENTED_EDGE('',*,*,#888,.F.);
#1242=ORIENTED_EDGE('',*,*,#1181,.F.);
#1243=ORIENTED_EDGE('',*,*,#1154,.F.);
#1244=ORIENTED_EDGE('',*,*,#1126,.F.);
#1246=ORIENTED_EDGE('',*,*,#1245,.T.);
#1248=ORIENTED_EDGE('',*,*,#1247,.F.);
#1249=EDGE_LOOP('',(#1241,#1242,#1243,#1244,#1246,#1248));
#1250=FACE_OUTER_BOUND('',#1249,.F.);
#1251=ORIENTED_EDGE('',*,*,#1212,.T.);
#1253=ORIENTED_EDGE('',*,*,#1252,.T.);
#1254=EDGE_LOOP('',(#1251,#1253));
#1255=FACE_BOUND('',#1254,.F.);
#1256=ADVANCED_FACE('',(#1250,#1255),#1240,.T.);
#1257=CARTESIAN_POINT('',(3.9E0,2.E1,-3.45E1));
#1258=DIRECTION('',(0.E0,0.E0,1.E0));
#1259=DIRECTION('',(1.E0,0.E0,0.E0));
#1260=AXIS2_PLACEMENT_3D('',#1257,#1258,#1259);
#1261=CYLINDRICAL_SURFACE('',#1260,4.E0);
#1262=ORIENTED_EDGE('',*,*,#1124,.F.);
#1263=ORIENTED_EDGE('',*,*,#1032,.T.);
#1264=ORIENTED_EDGE('',*,*,#1003,.F.);
#1266=ORIENTED_EDGE('',*,*,#1265,.F.);
#1267=ORIENTED_EDGE('',*,*,#1027,.T.);
#1268=ORIENTED_EDGE('',*,*,#854,.F.);
#1270=ORIENTED_EDGE('',*,*,#1269,.F.);
#1271=ORIENTED_EDGE('',*,*,#1245,.F.);
#1272=EDGE_LOOP('',(#1262,#1263,#1264,#1266,#1267,#1268,#1270,#1271));
#1273=FACE_OUTER_BOUND('',#1272,.F.);
#1274=ADVANCED_FACE('',(#1273),#1261,.T.);
#1275=CARTESIAN_POINT('',(1.05E1,1.4E1,1.75E1));
#1276=DIRECTION('',(-1.E0,0.E0,0.E0));
#1277=DIRECTION('',(0.E0,1.E0,0.E0));
#1278=AXIS2_PLACEMENT_3D('',#1275,#1276,#1277);
#1279=CYLINDRICAL_SURFACE('',#1278,6.5E0);
#1280=ORIENTED_EDGE('',*,*,#1029,.T.);
#1281=ORIENTED_EDGE('',*,*,#1265,.T.);
#1282=ORIENTED_EDGE('',*,*,#1001,.T.);
#1283=ORIENTED_EDGE('',*,*,#973,.T.);
#1284=ORIENTED_EDGE('',*,*,#998,.F.);
#1285=EDGE_LOOP('',(#1280,#1281,#1282,#1283,#1284));
#1286=FACE_OUTER_BOUND('',#1285,.F.);
#1287=ADVANCED_FACE('',(#1286),#1279,.F.);
#1288=CARTESIAN_POINT('',(0.E0,1.8E1,2.176050075737E1));
#1289=DIRECTION('',(1.E0,0.E0,0.E0));
#1290=DIRECTION('',(0.E0,0.E0,-1.E0));
#1291=AXIS2_PLACEMENT_3D('',#1288,#1289,#1290);
#1292=CYLINDRICAL_SURFACE('',#1291,5.999999999999E0);
#1293=ORIENTED_EDGE('',*,*,#852,.F.);
#1294=ORIENTED_EDGE('',*,*,#870,.F.);
#1295=ORIENTED_EDGE('',*,*,#890,.F.);
#1296=ORIENTED_EDGE('',*,*,#1247,.T.);
#1297=ORIENTED_EDGE('',*,*,#1269,.T.);
#1298=EDGE_LOOP('',(#1293,#1294,#1295,#1296,#1297));
#1299=FACE_OUTER_BOUND('',#1298,.F.);
#1300=ADVANCED_FACE('',(#1299),#1292,.T.);
#1301=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1302=DIRECTION('',(0.E0,1.E0,0.E0));
#1303=DIRECTION('',(1.E0,0.E0,0.E0));
#1304=AXIS2_PLACEMENT_3D('',#1301,#1302,#1303);
#1305=CYLINDRICAL_SURFACE('',#1304,3.E0);
#1306=ORIENTED_EDGE('',*,*,#1252,.F.);
#1307=ORIENTED_EDGE('',*,*,#1217,.F.);
#1308=ORIENTED_EDGE('',*,*,#1098,.T.);
#1309=ORIENTED_EDGE('',*,*,#1214,.T.);
#1310=EDGE_LOOP('',(#1306,#1307,#1308,#1309));
#1311=FACE_OUTER_BOUND('',#1310,.F.);
#1312=ADVANCED_FACE('',(#1311),#1305,.F.);
#1313=CARTESIAN_POINT('',(8.9E0,-2.6E1,0.E0));
#1314=DIRECTION('',(0.E0,1.E0,0.E0));
#1315=DIRECTION('',(1.E0,0.E0,0.E0));
#1316=AXIS2_PLACEMENT_3D('',#1313,#1314,#1315);
#1317=CYLINDRICAL_SURFACE('',#1316,3.E0);
#1318=ORIENTED_EDGE('',*,*,#1202,.T.);
#1319=ORIENTED_EDGE('',*,*,#1231,.T.);
#1320=ORIENTED_EDGE('',*,*,#1062,.F.);
#1321=ORIENTED_EDGE('',*,*,#1228,.F.);
#1322=EDGE_LOOP('',(#1318,#1319,#1320,#1321));
#1323=FACE_OUTER_BOUND('',#1322,.F.);
#1324=ADVANCED_FACE('',(#1323),#1317,.F.);
#1325=CARTESIAN_POINT('',(-5.E-1,-1.4E1,1.75E1));
#1326=DIRECTION('',(1.E0,0.E0,0.E0));
#1327=DIRECTION('',(0.E0,-1.E0,0.E0));
#1328=AXIS2_PLACEMENT_3D('',#1325,#1326,#1327);
#1329=CYLINDRICAL_SURFACE('',#1328,6.5E0);
#1330=ORIENTED_EDGE('',*,*,#1021,.F.);
#1331=ORIENTED_EDGE('',*,*,#820,.T.);
#1333=ORIENTED_EDGE('',*,*,#1332,.F.);
#1335=ORIENTED_EDGE('',*,*,#1334,.T.);
#1337=ORIENTED_EDGE('',*,*,#1336,.T.);
#1338=EDGE_LOOP('',(#1330,#1331,#1333,#1335,#1337));
#1339=FACE_OUTER_BOUND('',#1338,.F.);
#1340=ADVANCED_FACE('',(#1339),#1329,.F.);
#1341=CARTESIAN_POINT('',(-5.E-1,-1.4E1,1.75E1));
#1342=DIRECTION('',(1.E0,0.E0,0.E0));
#1343=DIRECTION('',(0.E0,-1.E0,0.E0));
#1344=AXIS2_PLACEMENT_3D('',#1341,#1342,#1343);
#1345=CYLINDRICAL_SURFACE('',#1344,6.5E0);
#1346=ORIENTED_EDGE('',*,*,#1023,.F.);
#1347=ORIENTED_EDGE('',*,*,#1336,.F.);
#1349=ORIENTED_EDGE('',*,*,#1348,.F.);
#1350=ORIENTED_EDGE('',*,*,#1332,.T.);
#1351=ORIENTED_EDGE('',*,*,#818,.T.);
#1352=EDGE_LOOP('',(#1346,#1347,#1349,#1350,#1351));
#1353=FACE_OUTER_BOUND('',#1352,.F.);
#1354=ADVANCED_FACE('',(#1353),#1345,.F.);
#1355=CARTESIAN_POINT('',(4.9E0,-1.4E1,1.75E1));
#1356=DIRECTION('',(1.E0,0.E0,0.E0));
#1357=DIRECTION('',(0.E0,-1.E0,0.E0));
#1358=AXIS2_PLACEMENT_3D('',#1355,#1356,#1357);
#1359=CONICAL_SURFACE('',#1358,4.9E0,4.5E1);
#1361=ORIENTED_EDGE('',*,*,#1360,.T.);
#1362=ORIENTED_EDGE('',*,*,#1348,.T.);
#1364=ORIENTED_EDGE('',*,*,#1363,.F.);
#1366=ORIENTED_EDGE('',*,*,#1365,.F.);
#1367=EDGE_LOOP('',(#1361,#1362,#1364,#1366));
#1368=FACE_OUTER_BOUND('',#1367,.F.);
#1369=ADVANCED_FACE('',(#1368),#1359,.F.);
#1370=CARTESIAN_POINT('',(4.9E0,-1.4E1,1.75E1));
#1371=DIRECTION('',(1.E0,0.E0,0.E0));
#1372=DIRECTION('',(0.E0,-1.E0,0.E0));
#1373=AXIS2_PLACEMENT_3D('',#1370,#1371,#1372);
#1374=CONICAL_SURFACE('',#1373,4.9E0,4.5E1);
#1375=ORIENTED_EDGE('',*,*,#1360,.F.);
#1377=ORIENTED_EDGE('',*,*,#1376,.T.);
#1378=ORIENTED_EDGE('',*,*,#1363,.T.);
#1379=ORIENTED_EDGE('',*,*,#1334,.F.);
#1380=EDGE_LOOP('',(#1375,#1377,#1378,#1379));
#1381=FACE_OUTER_BOUND('',#1380,.F.);
#1382=ADVANCED_FACE('',(#1381),#1374,.F.);
#1383=CARTESIAN_POINT('',(-5.E-1,-1.4E1,1.75E1));
#1384=DIRECTION('',(1.E0,0.E0,0.E0));
#1385=DIRECTION('',(0.E0,-1.E0,0.E0));
#1386=AXIS2_PLACEMENT_3D('',#1383,#1384,#1385);
#1387=CYLINDRICAL_SURFACE('',#1386,3.3E0);
#1388=ORIENTED_EDGE('',*,*,#908,.T.);
#1390=ORIENTED_EDGE('',*,*,#1389,.T.);
#1391=ORIENTED_EDGE('',*,*,#1376,.F.);
#1393=ORIENTED_EDGE('',*,*,#1392,.F.);
#1394=EDGE_LOOP('',(#1388,#1390,#1391,#1393));
#1395=FACE_OUTER_BOUND('',#1394,.F.);
#1396=ADVANCED_FACE('',(#1395),#1387,.F.);
#1397=CARTESIAN_POINT('',(-5.E-1,-1.4E1,1.75E1));
#1398=DIRECTION('',(1.E0,0.E0,0.E0));
#1399=DIRECTION('',(0.E0,-1.E0,0.E0));
#1400=AXIS2_PLACEMENT_3D('',#1397,#1398,#1399);
#1401=CYLINDRICAL_SURFACE('',#1400,3.3E0);
#1402=ORIENTED_EDGE('',*,*,#910,.T.);
#1403=ORIENTED_EDGE('',*,*,#1392,.T.);
#1404=ORIENTED_EDGE('',*,*,#1365,.T.);
#1405=ORIENTED_EDGE('',*,*,#1389,.F.);
#1406=EDGE_LOOP('',(#1402,#1403,#1404,#1405));
#1407=FACE_OUTER_BOUND('',#1406,.F.);
#1408=ADVANCED_FACE('',(#1407),#1401,.F.);
#1409=CARTESIAN_POINT('',(0.E0,2.05E1,2.15E1));
#1410=DIRECTION('',(0.E0,-1.E0,0.E0));
#1411=DIRECTION('',(0.E0,0.E0,-1.E0));
#1412=AXIS2_PLACEMENT_3D('',#1409,#1410,#1411);
#1413=PLANE('',#1412);
#1414=ORIENTED_EDGE('',*,*,#914,.T.);
#1416=ORIENTED_EDGE('',*,*,#1415,.T.);
#1418=ORIENTED_EDGE('',*,*,#1417,.F.);
#1420=ORIENTED_EDGE('',*,*,#1419,.F.);
#1421=EDGE_LOOP('',(#1414,#1416,#1418,#1420));
#1422=FACE_OUTER_BOUND('',#1421,.F.);
#1423=ADVANCED_FACE('',(#1422),#1413,.T.);
#1424=CARTESIAN_POINT('',(0.E0,2.05E1,1.35E1));
#1425=DIRECTION('',(0.E0,0.E0,-1.E0));
#1426=DIRECTION('',(0.E0,1.E0,0.E0));
#1427=AXIS2_PLACEMENT_3D('',#1424,#1425,#1426);
#1428=PLANE('',#1427);
#1429=ORIENTED_EDGE('',*,*,#920,.T.);
#1431=ORIENTED_EDGE('',*,*,#1430,.T.);
#1433=ORIENTED_EDGE('',*,*,#1432,.F.);
#1434=ORIENTED_EDGE('',*,*,#1415,.F.);
#1435=EDGE_LOOP('',(#1429,#1431,#1433,#1434));
#1436=FACE_OUTER_BOUND('',#1435,.F.);
#1437=ADVANCED_FACE('',(#1436),#1428,.T.);
#1438=CARTESIAN_POINT('',(0.E0,2.15E1,1.35E1));
#1439=DIRECTION('',(0.E0,1.E0,0.E0));
#1440=DIRECTION('',(0.E0,0.E0,1.E0));
#1441=AXIS2_PLACEMENT_3D('',#1438,#1439,#1440);
#1442=PLANE('',#1441);
#1443=ORIENTED_EDGE('',*,*,#918,.T.);
#1445=ORIENTED_EDGE('',*,*,#1444,.T.);
#1447=ORIENTED_EDGE('',*,*,#1446,.F.);
#1448=ORIENTED_EDGE('',*,*,#1430,.F.);
#1449=EDGE_LOOP('',(#1443,#1445,#1447,#1448));
#1450=FACE_OUTER_BOUND('',#1449,.F.);
#1451=ADVANCED_FACE('',(#1450),#1442,.T.);
#1452=CARTESIAN_POINT('',(0.E0,2.15E1,2.15E1));
#1453=DIRECTION('',(0.E0,0.E0,1.E0));
#1454=DIRECTION('',(0.E0,-1.E0,0.E0));
#1455=AXIS2_PLACEMENT_3D('',#1452,#1453,#1454);
#1456=PLANE('',#1455);
#1457=ORIENTED_EDGE('',*,*,#916,.T.);
#1458=ORIENTED_EDGE('',*,*,#1419,.T.);
#1460=ORIENTED_EDGE('',*,*,#1459,.F.);
#1461=ORIENTED_EDGE('',*,*,#1444,.F.);
#1462=EDGE_LOOP('',(#1457,#1458,#1460,#1461));
#1463=FACE_OUTER_BOUND('',#1462,.F.);
#1464=ADVANCED_FACE('',(#1463),#1456,.T.);
#1465=CARTESIAN_POINT('',(-2.5E0,0.E0,0.E0));
#1466=DIRECTION('',(1.E0,0.E0,0.E0));
#1467=DIRECTION('',(0.E0,0.E0,-1.E0));
#1468=AXIS2_PLACEMENT_3D('',#1465,#1466,#1467);
#1469=PLANE('',#1468);
#1470=ORIENTED_EDGE('',*,*,#1417,.T.);
#1471=ORIENTED_EDGE('',*,*,#1432,.T.);
#1472=ORIENTED_EDGE('',*,*,#1446,.T.);
#1473=ORIENTED_EDGE('',*,*,#1459,.T.);
#1474=EDGE_LOOP('',(#1470,#1471,#1472,#1473));
#1475=FACE_OUTER_BOUND('',#1474,.F.);
#1476=ADVANCED_FACE('',(#1475),#1469,.F.);
#1477=CARTESIAN_POINT('',(0.E0,-2.05E1,2.15E1));
#1478=DIRECTION('',(0.E0,0.E0,1.E0));
#1479=DIRECTION('',(0.E0,-1.E0,0.E0));
#1480=AXIS2_PLACEMENT_3D('',#1477,#1478,#1479);
#1481=PLANE('',#1480);
#1482=ORIENTED_EDGE('',*,*,#924,.T.);
#1484=ORIENTED_EDGE('',*,*,#1483,.T.);
#1486=ORIENTED_EDGE('',*,*,#1485,.F.);
#1488=ORIENTED_EDGE('',*,*,#1487,.F.);
#1489=EDGE_LOOP('',(#1482,#1484,#1486,#1488));
#1490=FACE_OUTER_BOUND('',#1489,.F.);
#1491=ADVANCED_FACE('',(#1490),#1481,.T.);
#1492=CARTESIAN_POINT('',(0.E0,-2.15E1,2.15E1));
#1493=DIRECTION('',(0.E0,-1.E0,0.E0));
#1494=DIRECTION('',(0.E0,0.E0,-1.E0));
#1495=AXIS2_PLACEMENT_3D('',#1492,#1493,#1494);
#1496=PLANE('',#1495);
#1497=ORIENTED_EDGE('',*,*,#930,.T.);
#1499=ORIENTED_EDGE('',*,*,#1498,.T.);
#1501=ORIENTED_EDGE('',*,*,#1500,.F.);
#1502=ORIENTED_EDGE('',*,*,#1483,.F.);
#1503=EDGE_LOOP('',(#1497,#1499,#1501,#1502));
#1504=FACE_OUTER_BOUND('',#1503,.F.);
#1505=ADVANCED_FACE('',(#1504),#1496,.T.);
#1506=CARTESIAN_POINT('',(0.E0,-2.15E1,1.35E1));
#1507=DIRECTION('',(0.E0,0.E0,-1.E0));
#1508=DIRECTION('',(0.E0,1.E0,0.E0));
#1509=AXIS2_PLACEMENT_3D('',#1506,#1507,#1508);
#1510=PLANE('',#1509);
#1511=ORIENTED_EDGE('',*,*,#928,.T.);
#1513=ORIENTED_EDGE('',*,*,#1512,.T.);
#1515=ORIENTED_EDGE('',*,*,#1514,.F.);
#1516=ORIENTED_EDGE('',*,*,#1498,.F.);
#1517=EDGE_LOOP('',(#1511,#1513,#1515,#1516));
#1518=FACE_OUTER_BOUND('',#1517,.F.);
#1519=ADVANCED_FACE('',(#1518),#1510,.T.);
#1520=CARTESIAN_POINT('',(0.E0,-2.05E1,1.35E1));
#1521=DIRECTION('',(0.E0,1.E0,0.E0));
#1522=DIRECTION('',(0.E0,0.E0,1.E0));
#1523=AXIS2_PLACEMENT_3D('',#1520,#1521,#1522);
#1524=PLANE('',#1523);
#1525=ORIENTED_EDGE('',*,*,#926,.T.);
#1526=ORIENTED_EDGE('',*,*,#1487,.T.);
#1528=ORIENTED_EDGE('',*,*,#1527,.F.);
#1529=ORIENTED_EDGE('',*,*,#1512,.F.);
#1530=EDGE_LOOP('',(#1525,#1526,#1528,#1529));
#1531=FACE_OUTER_BOUND('',#1530,.F.);
#1532=ADVANCED_FACE('',(#1531),#1524,.T.);
#1533=CARTESIAN_POINT('',(-2.5E0,0.E0,0.E0));
#1534=DIRECTION('',(1.E0,0.E0,0.E0));
#1535=DIRECTION('',(0.E0,0.E0,-1.E0));
#1536=AXIS2_PLACEMENT_3D('',#1533,#1534,#1535);
#1537=PLANE('',#1536);
#1538=ORIENTED_EDGE('',*,*,#1485,.T.);
#1539=ORIENTED_EDGE('',*,*,#1500,.T.);
#1540=ORIENTED_EDGE('',*,*,#1514,.T.);
#1541=ORIENTED_EDGE('',*,*,#1527,.T.);
#1542=EDGE_LOOP('',(#1538,#1539,#1540,#1541));
#1543=FACE_OUTER_BOUND('',#1542,.F.);
#1544=ADVANCED_FACE('',(#1543),#1537,.F.);
#1545=CLOSED_SHELL('',(#787,#804,#826,#842,#860,#874,#934,#949,#962,#977,#990,
#1007,#1042,#1066,#1079,#1102,#1116,#1132,#1146,#1160,#1173,#1186,#1206,#1221,
#1235,#1256,#1274,#1287,#1300,#1312,#1324,#1340,#1354,#1369,#1382,#1396,#1408,
#1423,#1437,#1451,#1464,#1476,#1491,#1505,#1519,#1532,#1544));
#1546=MANIFOLD_SOLID_BREP('',#1545);
#1547=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1548=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1549=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1550=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1549);
#1551=(CONVERSION_BASED_UNIT('DEGREE',#1550)NAMED_UNIT(#1548)PLANE_ANGLE_UNIT(
));
#1552=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1553=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(6.304612533414E-3),#1547,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1554=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1553))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1547,#1551,#1552))REPRESENTATION_CONTEXT(
'ID1','3'));
#1555=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1556=DIRECTION('',(0.E0,0.E0,1.E0));
#1557=DIRECTION('',(1.E0,0.E0,0.E0));
#1560=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1561=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#1560);
#1562=DESIGN_CONTEXT('',#1560,'design');
#1563=MECHANICAL_CONTEXT('',#1560,'mechanical');
#1564=PRODUCT('12102_TECAJ_PA_30X30_A','12102_TECAJ_PA_30X30_A','NOT SPECIFIED',
(#1563));
#1565=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1564,.MADE.);
#1574=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1575=DIRECTION('',(0.E0,0.E0,1.E0));
#1576=DIRECTION('',(1.E0,0.E0,0.E0));
#1577=AXIS2_PLACEMENT_3D('',#1574,#1575,#1576);
#1578=ITEM_DEFINED_TRANSFORMATION('','',#1558,#1577);
#1579=(REPRESENTATION_RELATIONSHIP('','',#1559,#1571)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1578)SHAPE_REPRESENTATION_RELATIONSHIP());
#1580=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1579,#1573);
#1583=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1584=DIRECTION('',(0.E0,0.E0,-1.E0));
#1585=DIRECTION('',(1.E0,0.E0,0.E0));
#1586=AXIS2_PLACEMENT_3D('',#1583,#1584,#1585);
#1587=ITEM_DEFINED_TRANSFORMATION('','',#1558,#1586);
#1588=(REPRESENTATION_RELATIONSHIP('','',#1559,#1571)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1587)SHAPE_REPRESENTATION_RELATIONSHIP());
#1589=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1588,#1582);
#1591=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1592=DIRECTION('',(0.E0,1.E0,0.E0));
#1593=DIRECTION('',(1.E0,0.E0,0.E0));
#1594=AXIS2_PLACEMENT_3D('',#1591,#1592,#1593);
#1596=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1597=DIRECTION('',(0.E0,1.E0,0.E0));
#1598=DIRECTION('',(-1.E0,0.E0,0.E0));
#1599=AXIS2_PLACEMENT_3D('',#1596,#1597,#1598);
#1601=DIRECTION('',(0.E0,1.E0,0.E0));
#1602=VECTOR('',#1601,4.8E1);
#1603=CARTESIAN_POINT('',(3.E0,-2.4E1,0.E0));
#1604=LINE('',#1603,#1602);
#1605=DIRECTION('',(0.E0,1.E0,0.E0));
#1606=VECTOR('',#1605,4.8E1);
#1607=CARTESIAN_POINT('',(-3.E0,-2.4E1,0.E0));
#1608=LINE('',#1607,#1606);
#1609=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1610=DIRECTION('',(0.E0,1.E0,0.E0));
#1611=DIRECTION('',(1.E0,0.E0,0.E0));
#1612=AXIS2_PLACEMENT_3D('',#1609,#1610,#1611);
#1614=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1615=DIRECTION('',(0.E0,1.E0,0.E0));
#1616=DIRECTION('',(-1.E0,0.E0,0.E0));
#1617=AXIS2_PLACEMENT_3D('',#1614,#1615,#1616);
#1619=CARTESIAN_POINT('',(3.E0,-2.4E1,0.E0));
#1620=CARTESIAN_POINT('',(-3.E0,-2.4E1,0.E0));
#1621=VERTEX_POINT('',#1619);
#1622=VERTEX_POINT('',#1620);
#1623=CARTESIAN_POINT('',(3.E0,2.4E1,0.E0));
#1624=CARTESIAN_POINT('',(-3.E0,2.4E1,0.E0));
#1625=VERTEX_POINT('',#1623);
#1626=VERTEX_POINT('',#1624);
#1627=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1628=DIRECTION('',(0.E0,1.E0,0.E0));
#1629=DIRECTION('',(1.E0,0.E0,0.E0));
#1630=AXIS2_PLACEMENT_3D('',#1627,#1628,#1629);
#1631=PLANE('',#1630);
#1633=ORIENTED_EDGE('',*,*,#1632,.T.);
#1635=ORIENTED_EDGE('',*,*,#1634,.T.);
#1636=EDGE_LOOP('',(#1633,#1635));
#1637=FACE_OUTER_BOUND('',#1636,.F.);
#1638=ADVANCED_FACE('',(#1637),#1631,.F.);
#1639=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1640=DIRECTION('',(0.E0,1.E0,0.E0));
#1641=DIRECTION('',(1.E0,0.E0,0.E0));
#1642=AXIS2_PLACEMENT_3D('',#1639,#1640,#1641);
#1643=CYLINDRICAL_SURFACE('',#1642,3.E0);
#1644=ORIENTED_EDGE('',*,*,#1632,.F.);
#1646=ORIENTED_EDGE('',*,*,#1645,.T.);
#1648=ORIENTED_EDGE('',*,*,#1647,.T.);
#1650=ORIENTED_EDGE('',*,*,#1649,.F.);
#1651=EDGE_LOOP('',(#1644,#1646,#1648,#1650));
#1652=FACE_OUTER_BOUND('',#1651,.F.);
#1653=ADVANCED_FACE('',(#1652),#1643,.T.);
#1654=CARTESIAN_POINT('',(0.E0,-2.4E1,0.E0));
#1655=DIRECTION('',(0.E0,1.E0,0.E0));
#1656=DIRECTION('',(1.E0,0.E0,0.E0));
#1657=AXIS2_PLACEMENT_3D('',#1654,#1655,#1656);
#1658=CYLINDRICAL_SURFACE('',#1657,3.E0);
#1659=ORIENTED_EDGE('',*,*,#1634,.F.);
#1660=ORIENTED_EDGE('',*,*,#1649,.T.);
#1662=ORIENTED_EDGE('',*,*,#1661,.T.);
#1663=ORIENTED_EDGE('',*,*,#1645,.F.);
#1664=EDGE_LOOP('',(#1659,#1660,#1662,#1663));
#1665=FACE_OUTER_BOUND('',#1664,.F.);
#1666=ADVANCED_FACE('',(#1665),#1658,.T.);
#1667=CARTESIAN_POINT('',(0.E0,2.4E1,0.E0));
#1668=DIRECTION('',(0.E0,1.E0,0.E0));
#1669=DIRECTION('',(1.E0,0.E0,0.E0));
#1670=AXIS2_PLACEMENT_3D('',#1667,#1668,#1669);
#1671=PLANE('',#1670);
#1672=ORIENTED_EDGE('',*,*,#1647,.F.);
#1673=ORIENTED_EDGE('',*,*,#1661,.F.);
#1674=EDGE_LOOP('',(#1672,#1673));
#1675=FACE_OUTER_BOUND('',#1674,.F.);
#1676=ADVANCED_FACE('',(#1675),#1671,.T.);
#1677=CLOSED_SHELL('',(#1638,#1653,#1666,#1676));
#1678=MANIFOLD_SOLID_BREP('',#1677);
#1679=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1680=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1681=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1682=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1681);
#1683=(CONVERSION_BASED_UNIT('DEGREE',#1682)NAMED_UNIT(#1680)PLANE_ANGLE_UNIT(
));
#1684=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1685=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.874288917092E-3),#1679,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1686=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1685))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1679,#1683,#1684))REPRESENTATION_CONTEXT(
'ID2','3'));
#1687=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1688=DIRECTION('',(0.E0,0.E0,1.E0));
#1689=DIRECTION('',(1.E0,0.E0,0.E0));
#1692=MECHANICAL_CONTEXT('',#1560,'mechanical');
#1693=PRODUCT('12102_TECAJ_PA_30X30_B','12102_TECAJ_PA_30X30_B','NOT SPECIFIED',
(#1692));
#1694=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1693,.MADE.);
#1700=CARTESIAN_POINT('',(8.9E0,0.E0,0.E0));
#1701=DIRECTION('',(0.E0,0.E0,-1.E0));
#1702=DIRECTION('',(1.E0,0.E0,0.E0));
#1703=AXIS2_PLACEMENT_3D('',#1700,#1701,#1702);
#1704=ITEM_DEFINED_TRANSFORMATION('','',#1690,#1703);
#1705=(REPRESENTATION_RELATIONSHIP('','',#1691,#1571)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1704)SHAPE_REPRESENTATION_RELATIONSHIP());
#1706=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1705,#1699);
#1707=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1708=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1709=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1710=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1709);
#1711=(CONVERSION_BASED_UNIT('DEGREE',#1710)NAMED_UNIT(#1708)PLANE_ANGLE_UNIT(
));
#1712=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1713=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.825115162395E-3),#1707,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1714=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1713))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1707,#1711,#1712))REPRESENTATION_CONTEXT(
'ID3','3'));
#1715=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1716=DIRECTION('',(0.E0,0.E0,1.E0));
#1717=DIRECTION('',(1.E0,0.E0,0.E0));
#1719=DESIGN_CONTEXT('',#1560,'design');
#1720=MECHANICAL_CONTEXT('',#1560,'mechanical');
#1721=PRODUCT('12102_TECAJ_PA_30X30_ASM','12102_TECAJ_PA_30X30_ASM',
'NOT SPECIFIED',(#1720));
#1722=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1721,.MADE.);
#1724=PRODUCT_CATEGORY('part','');
#1725=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#1721));
#1726=PRODUCT_CATEGORY_RELATIONSHIP('','',#1724,#1725);
#1727=PRODUCT_CATEGORY('part','');
#1728=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#1564,#1693));
#1729=PRODUCT_CATEGORY_RELATIONSHIP('','',#1727,#1728);
#1730=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#1731=SECURITY_CLASSIFICATION('','',#1730);
#1732=CC_DESIGN_SECURITY_CLASSIFICATION(#1731,(#1565,#1694,#1722,#1572,#1581,
#1698));
#1733=APPROVAL_STATUS('approved');
#1734=APPROVAL(#1733,'');
#1735=CC_DESIGN_APPROVAL(#1734,(#1731,#1565,#1694,#1722,#1566,#1695,#1723));
#1736=CALENDAR_DATE(108,22,9);
#1737=COORDINATED_UNIVERSAL_TIME_OFFSET(3,0,.AHEAD.);
#1738=LOCAL_TIME(7,27,1.E1,#1737);
#1739=DATE_AND_TIME(#1736,#1738);
#1740=APPROVAL_DATE_TIME(#1739,#1734);
#1741=DATE_TIME_ROLE('creation_date');
#1742=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1739,#1741,(#1566,#1695,#1723));
#1743=DATE_TIME_ROLE('classification_date');
#1744=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1739,#1743,(#1731));
#1745=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#1746=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#1747=PERSON_AND_ORGANIZATION(#1745,#1746);
#1748=APPROVAL_ROLE('approver');
#1749=APPROVAL_PERSON_ORGANIZATION(#1747,#1734,#1748);
#1750=PERSON_AND_ORGANIZATION_ROLE('creator');
#1751=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1747,#1750,(#1565,#1694,
#1722,#1566,#1695,#1723));
#1752=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#1753=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1747,#1752,(#1565,#1694,
#1722));
#1754=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#1755=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1747,#1754,(#1731));
#1756=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#1757=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1747,#1756,(#1721,#1564,
#1693));
#23=B_SPLINE_CURVE_WITH_KNOTS('',3,(#14,#15,#16,#17,#18,#19,#20,#21,#22),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,5.E-1,7.5E-1,8.75E-1,
1.E0),.UNSPECIFIED.);
#33=B_SPLINE_CURVE_WITH_KNOTS('',3,(#24,#25,#26,#27,#28,#29,#30,#31,#32),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#41=B_SPLINE_CURVE_WITH_KNOTS('',3,(#34,#35,#36,#37,#38,#39,#40),.UNSPECIFIED.,
.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),.UNSPECIFIED.);
#53=B_SPLINE_CURVE_WITH_KNOTS('',3,(#42,#43,#44,#45,#46,#47,#48,#49,#50,#51,
#52),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,3.75E-1,
5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#65=B_SPLINE_CURVE_WITH_KNOTS('',3,(#54,#55,#56,#57,#58,#59,#60,#61,#62,#63,
#64),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,3.75E-1,
5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#75=B_SPLINE_CURVE_WITH_KNOTS('',3,(#66,#67,#68,#69,#70,#71,#72,#73,#74),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,3.333333333333E-1,
5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),.UNSPECIFIED.);
#80=CIRCLE('',#79,9.999999999999E1);
#89=CIRCLE('',#88,3.3E0);
#94=CIRCLE('',#93,3.3E0);
#99=CIRCLE('',#98,3.3E0);
#104=CIRCLE('',#103,3.3E0);
#129=CIRCLE('',#128,5.999999999999E0);
#134=CIRCLE('',#133,9.999999999999E1);
#139=CIRCLE('',#138,5.999999999999E0);
#192=CIRCLE('',#191,3.3E0);
#201=CIRCLE('',#200,3.3E0);
#218=CIRCLE('',#217,6.5E0);
#223=CIRCLE('',#222,6.5E0);
#248=CIRCLE('',#247,6.5E0);
#253=CIRCLE('',#252,6.5E0);
#262=CIRCLE('',#261,9.85E1);
#271=CIRCLE('',#270,6.5E0);
#276=CIRCLE('',#275,6.5E0);
#301=CIRCLE('',#300,3.E0);
#306=CIRCLE('',#305,3.E0);
#315=CIRCLE('',#314,3.E0);
#320=CIRCLE('',#319,3.E0);
#337=CIRCLE('',#336,7.E0);
#342=CIRCLE('',#341,7.E0);
#351=CIRCLE('',#350,7.E0);
#384=CIRCLE('',#383,3.E0);
#389=CIRCLE('',#388,3.E0);
#406=CIRCLE('',#405,7.E0);
#423=CIRCLE('',#422,3.E0);
#428=CIRCLE('',#427,3.E0);
#433=CIRCLE('',#432,4.E0);
#445=B_SPLINE_CURVE_WITH_KNOTS('',3,(#434,#435,#436,#437,#438,#439,#440,#441,
#442,#443,#444),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,
3.75E-1,5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#457=B_SPLINE_CURVE_WITH_KNOTS('',3,(#446,#447,#448,#449,#450,#451,#452,#453,
#454,#455,#456),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(0.E0,1.25E-1,2.5E-1,
3.75E-1,5.E-1,6.25E-1,7.5E-1,8.75E-1,1.E0),.UNSPECIFIED.);
#465=B_SPLINE_CURVE_WITH_KNOTS('',3,(#458,#459,#460,#461,#462,#463,#464),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#475=B_SPLINE_CURVE_WITH_KNOTS('',3,(#466,#467,#468,#469,#470,#471,#472,#473,
#474),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#493=B_SPLINE_CURVE_WITH_KNOTS('',3,(#484,#485,#486,#487,#488,#489,#490,#491,
#492),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,1.666666666667E-1,
3.333333333333E-1,5.E-1,6.666666666667E-1,8.333333333333E-1,1.E0),
.UNSPECIFIED.);
#510=CIRCLE('',#509,6.5E0);
#519=CIRCLE('',#518,6.5E0);
#536=CIRCLE('',#535,3.3E0);
#541=CIRCLE('',#540,3.3E0);
#777=EDGE_CURVE('',#684,#685,#5,.T.);
#779=EDGE_CURVE('',#616,#685,#143,.T.);
#781=EDGE_CURVE('',#616,#617,#9,.T.);
#783=EDGE_CURVE('',#684,#617,#13,.T.);
#794=EDGE_CURVE('',#684,#691,#23,.T.);
#796=EDGE_CURVE('',#691,#689,#239,.T.);
#798=EDGE_CURVE('',#695,#689,#379,.T.);
#800=EDGE_CURVE('',#685,#695,#147,.T.);
#812=EDGE_CURVE('',#631,#617,#33,.T.);
#814=EDGE_CURVE('',#629,#631,#41,.T.);
#816=EDGE_CURVE('',#666,#629,#257,.T.);
#818=EDGE_CURVE('',#671,#666,#53,.T.);
#820=EDGE_CURVE('',#663,#671,#65,.T.);
#822=EDGE_CURVE('',#691,#663,#243,.T.);
#832=EDGE_CURVE('',#631,#633,#75,.T.);
#836=EDGE_CURVE('',#625,#616,#139,.T.);
#838=EDGE_CURVE('',#625,#633,#84,.T.);
#850=EDGE_CURVE('',#632,#633,#80,.T.);
#852=EDGE_CURVE('',#632,#630,#493,.T.);
#854=EDGE_CURVE('',#630,#628,#465,.T.);
#856=EDGE_CURVE('',#628,#629,#262,.T.);
#868=EDGE_CURVE('',#623,#625,#134,.T.);
#870=EDGE_CURVE('',#623,#632,#497,.T.);
#880=EDGE_CURVE('',#710,#711,#108,.T.);
#882=EDGE_CURVE('',#711,#715,#112,.T.);
#884=EDGE_CURVE('',#714,#715,#116,.T.);
#886=EDGE_CURVE('',#714,#677,#120,.T.);
#888=EDGE_CURVE('',#677,#620,#124,.T.);
#890=EDGE_CURVE('',#620,#623,#129,.T.);
#896=EDGE_CURVE('',#694,#695,#151,.T.);
#898=EDGE_CURVE('',#694,#710,#155,.T.);
#902=EDGE_CURVE('',#650,#651,#89,.T.);
#904=EDGE_CURVE('',#651,#650,#94,.T.);
#908=EDGE_CURVE('',#669,#670,#99,.T.);
#910=EDGE_CURVE('',#670,#669,#104,.T.);
#914=EDGE_CURVE('',#750,#751,#159,.T.);
#916=EDGE_CURVE('',#755,#750,#163,.T.);
#918=EDGE_CURVE('',#753,#755,#167,.T.);
#920=EDGE_CURVE('',#751,#753,#171,.T.);
#924=EDGE_CURVE('',#766,#767,#175,.T.);
#926=EDGE_CURVE('',#771,#766,#179,.T.);
#928=EDGE_CURVE('',#769,#771,#183,.T.);
#930=EDGE_CURVE('',#767,#769,#187,.T.);
#941=EDGE_CURVE('',#637,#650,#205,.T.);
#943=EDGE_CURVE('',#637,#641,#192,.T.);
#945=EDGE_CURVE('',#641,#651,#196,.T.);
#957=EDGE_CURVE('',#637,#641,#201,.T.);
#968=EDGE_CURVE('',#636,#637,#209,.T.);
#971=EDGE_CURVE('',#640,#641,#213,.T.);
#973=EDGE_CURVE('',#636,#640,#218,.T.);
#984=EDGE_CURVE('',#636,#640,#223,.T.);
#996=EDGE_CURVE('',#644,#645,#276,.T.);
#998=EDGE_CURVE('',#645,#640,#483,.T.);
#1001=EDGE_CURVE('',#652,#636,#479,.T.);
#1003=EDGE_CURVE('',#652,#644,#445,.T.);
#1013=EDGE_CURVE('',#702,#703,#227,.T.);
#1015=EDGE_CURVE('',#688,#702,#231,.T.);
#1017=EDGE_CURVE('',#688,#689,#235,.T.);
#1021=EDGE_CURVE('',#663,#664,#248,.T.);
#1023=EDGE_CURVE('',#664,#666,#253,.T.);
#1027=EDGE_CURVE('',#647,#628,#266,.T.);
#1029=EDGE_CURVE('',#645,#647,#271,.T.);
#1032=EDGE_CURVE('',#680,#644,#280,.T.);
#1034=EDGE_CURVE('',#706,#680,#284,.T.);
#1036=EDGE_CURVE('',#706,#707,#288,.T.);
#1038=EDGE_CURVE('',#703,#707,#292,.T.);
#1049=EDGE_CURVE('',#711,#703,#296,.T.);
#1052=EDGE_CURVE('',#721,#710,#359,.T.);
#1054=EDGE_CURVE('',#717,#721,#337,.T.);
#1056=EDGE_CURVE('',#702,#717,#324,.T.);
#1060=EDGE_CURVE('',#734,#735,#301,.T.);
#1062=EDGE_CURVE('',#735,#734,#306,.T.);
#1073=EDGE_CURVE('',#715,#707,#310,.T.);
#1086=EDGE_CURVE('',#706,#719,#332,.T.);
#1088=EDGE_CURVE('',#719,#723,#351,.T.);
#1090=EDGE_CURVE('',#723,#714,#371,.T.);
#1096=EDGE_CURVE('',#738,#739,#315,.T.);
#1098=EDGE_CURVE('',#739,#738,#320,.T.);
#1109=EDGE_CURVE('',#697,#717,#346,.T.);
#1111=EDGE_CURVE('',#688,#697,#328,.T.);
#1124=EDGE_CURVE('',#680,#681,#433,.T.);
#1126=EDGE_CURVE('',#681,#674,#410,.T.);
#1128=EDGE_CURVE('',#719,#674,#355,.T.);
#1139=EDGE_CURVE('',#699,#721,#367,.T.);
#1141=EDGE_CURVE('',#697,#699,#342,.T.);
#1154=EDGE_CURVE('',#674,#675,#406,.T.);
#1156=EDGE_CURVE('',#723,#675,#375,.T.);
#1168=EDGE_CURVE('',#699,#694,#363,.T.);
#1181=EDGE_CURVE('',#675,#677,#401,.T.);
#1200=EDGE_CURVE('',#730,#731,#384,.T.);
#1202=EDGE_CURVE('',#731,#730,#389,.T.);
#1212=EDGE_CURVE('',#726,#727,#423,.T.);
#1214=EDGE_CURVE('',#738,#726,#393,.T.);
#1217=EDGE_CURVE('',#739,#727,#501,.T.);
#1228=EDGE_CURVE('',#731,#735,#505,.T.);
#1231=EDGE_CURVE('',#730,#734,#397,.T.);
#1245=EDGE_CURVE('',#681,#621,#414,.T.);
#1247=EDGE_CURVE('',#620,#621,#418,.T.);
#1252=EDGE_CURVE('',#727,#726,#428,.T.);
#1265=EDGE_CURVE('',#647,#652,#457,.T.);
#1269=EDGE_CURVE('',#621,#630,#475,.T.);
#1332=EDGE_CURVE('',#656,#671,#523,.T.);
#1334=EDGE_CURVE('',#656,#660,#510,.T.);
#1336=EDGE_CURVE('',#660,#664,#514,.T.);
#1348=EDGE_CURVE('',#656,#660,#519,.T.);
#1360=EDGE_CURVE('',#655,#656,#527,.T.);
#1363=EDGE_CURVE('',#659,#660,#531,.T.);
#1365=EDGE_CURVE('',#655,#659,#536,.T.);
#1376=EDGE_CURVE('',#655,#659,#541,.T.);
#1389=EDGE_CURVE('',#670,#659,#549,.T.);
#1392=EDGE_CURVE('',#669,#655,#545,.T.);
#1415=EDGE_CURVE('',#751,#743,#557,.T.);
#1417=EDGE_CURVE('',#742,#743,#569,.T.);
#1419=EDGE_CURVE('',#750,#742,#553,.T.);
#1430=EDGE_CURVE('',#753,#745,#561,.T.);
#1432=EDGE_CURVE('',#743,#745,#573,.T.);
#1444=EDGE_CURVE('',#755,#747,#565,.T.);
#1446=EDGE_CURVE('',#745,#747,#577,.T.);
#1459=EDGE_CURVE('',#747,#742,#581,.T.);
#1483=EDGE_CURVE('',#767,#759,#589,.T.);
#1485=EDGE_CURVE('',#758,#759,#601,.T.);
#1487=EDGE_CURVE('',#766,#758,#585,.T.);
#1498=EDGE_CURVE('',#769,#761,#593,.T.);
#1500=EDGE_CURVE('',#759,#761,#605,.T.);
#1512=EDGE_CURVE('',#771,#763,#597,.T.);
#1514=EDGE_CURVE('',#761,#763,#609,.T.);
#1527=EDGE_CURVE('',#763,#758,#613,.T.);
#1558=AXIS2_PLACEMENT_3D('',#1555,#1556,#1557);
#1559=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1558,#1546),#1554);
#1566=PRODUCT_DEFINITION('design','',#1565,#1562);
#1567=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 12102_TECAJ_PA_30X30_A.',#1566);
#1568=SHAPE_DEFINITION_REPRESENTATION(#1567,#1559);
#1569=SHAPE_DEFINITION_REPRESENTATION(#1570,#1571);
#1570=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 12102_TECAJ_PA_30X30_ASM.',#1723);
#1571=SHAPE_REPRESENTATION('',(#1577,#1586,#1703,#1718),#1714);
#1572=NEXT_ASSEMBLY_USAGE_OCCURRENCE('0','Next assembly relationship',
'12102_TECAJ_PA_30X30_A',#1723,#1566,$);
#1573=PRODUCT_DEFINITION_SHAPE('Placement #0',
'Placement of 12102_TECAJ_PA_30X30_A with respect to 12102_TECAJ_PA_30X30_ASM',
#1572);
#1581=NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','Next assembly relationship',
'12102_TECAJ_PA_30X30_A',#1723,#1566,$);
#1582=PRODUCT_DEFINITION_SHAPE('Placement #1',
'Placement of 12102_TECAJ_PA_30X30_A with respect to 12102_TECAJ_PA_30X30_ASM',
#1581);
#1595=CIRCLE('',#1594,3.E0);
#1600=CIRCLE('',#1599,3.E0);
#1613=CIRCLE('',#1612,3.E0);
#1618=CIRCLE('',#1617,3.E0);
#1632=EDGE_CURVE('',#1621,#1622,#1595,.T.);
#1634=EDGE_CURVE('',#1622,#1621,#1600,.T.);
#1645=EDGE_CURVE('',#1621,#1625,#1604,.T.);
#1647=EDGE_CURVE('',#1625,#1626,#1613,.T.);
#1649=EDGE_CURVE('',#1622,#1626,#1608,.T.);
#1661=EDGE_CURVE('',#1626,#1625,#1618,.T.);
#1690=AXIS2_PLACEMENT_3D('',#1687,#1688,#1689);
#1691=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1690,#1678),#1686);
#1695=PRODUCT_DEFINITION('design','',#1694,#1562);
#1696=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 12102_TECAJ_PA_30X30_B.',#1695);
#1697=SHAPE_DEFINITION_REPRESENTATION(#1696,#1691);
#1698=NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','Next assembly relationship',
'12102_TECAJ_PA_30X30_B',#1723,#1695,$);
#1699=PRODUCT_DEFINITION_SHAPE('Placement #2',
'Placement of 12102_TECAJ_PA_30X30_B with respect to 12102_TECAJ_PA_30X30_ASM',
#1698);
#1718=AXIS2_PLACEMENT_3D('',#1715,#1716,#1717);
#1723=PRODUCT_DEFINITION('design','',#1722,#1719);
ENDSEC;
END-ISO-10303-21;