PODMENI

Ležaji Linearna tehnika Kroglične prenosne enote (skodelični ležaji) in TRANSPORTNI VALJI TRANSPORTNI VALJI Flange Fixing Units Bolt Fixing Units Base Fixing Units Tube Fixing / Clamp Fixing / Misc Units Glide-Alwayse Units & Fixing Sockets Euro Units Hi-Tech Double Seal Units 0,1,2,3,4,5 Hevi-Load Units 0,1,2,3 Hevi-Load Units 5,6 plus Die Lifters TUFF Series Heavy Duty Units Heavy Duty Units Series 800 Spring Loaded Units Fixing Clips Mini Ball Transfer Units Tesnila (semeringi) Varovalni obroči (seger obročki) Maziva, lepila Jermena, jermenice Galove verige, spojni členi, verižniki

AKCIJSKA PONUDBA

PRIHRANITE DO 40%

Za vas smo pripravili posebno ponudbo z zelo ugodnimi pogoji!

KLIKNI TUKAJ

NE PREZRITE

Alwayse predstavitveni film!

(klikni na sliko)

HepcoMotion® - Popolna Linearna Rešitev. Sedaj na voljo tudi pri nas.

Prodajni program NB-Nippon bearings

puše,linearne puše, tirnin vozički, okrogla vodila, tirna vodila, precizni aktuatorji...

Ugodne cene in hitra dobava!

Tube Fixing / Clamp Fixing / Misc Units

General Tolerance unless stated ±0.3mm

The individual product features are displayed at the foot of the table...

IMPORTANT - If you are unsure of your requirements, consult us: FREE TECHNICAL ADVICE

To order, specify REF No and TYPE, i.e. 3007-13

3004 - 1002 Tube Fixing

2004 Tube Fixing

Features: Tube fixing is acheived by pushing the spring washer into a suitable size tube and turning to lock. 3 sizes available . Suitable for use as castor.

Features: Tube fixing is acheived by pushing the bush into the tube. Rotating the unit expands the rubber bush for an interference fit. Excellent as a castor.

3007 - 1001 - 1021 - Clamp Fixing

Features: The 3007 and 1001 can be fixed to 1mm -10mm thick materials. 1mm - 27mm thick materials for the 1021. The maximum tightening torque is 15Nm for the 3007 and 1001, 20Nm for the 1021.

Optional extras: Dirt exit hole.

1004

1007

Features: Supplied with circlip for loosely fixing to materials up to 6.4mm thick. Dirt exit hole.

Features: Small taper on body allows for interference fixing. Do not strike the ball, use a tube on the flange diameter when fixing. Approx. size of taper is 35.8mm top and 35.4mm bottom. Dirt exit hole.

1500

Features: High load capacity. Improved rubber knife edge seal wipes debris off outside of ball. Dirt exit hole.